Until now, whenever audits were recorded we would try to delete
the node from containment just in case it exists. Since we now
want to treat segment repair downloads as audits, this would
erroneously remove nodes from containment, as repair does not go
through a Reverify step. With this changeset, (Batch)UpdateStats
will not remove nodes from containment. The Reverify method will
remove all necessary nodes from containment.
Change-Id: Iabc9496293076dccba32ddfa028e92580b26167f
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
There was a bug when user tried to get project after removing themselves from it.
Also we made user select firstly created project only if they removed themselves from current selected project.
Change-Id: I4b28ebc1ab4a8c14d05ef702e034f2ab39225cc3
Method IterateLoopSegments can be used to iterate over all segments in metabase without touching objects.
Change-Id: I3cc0e783884b603b47ef3f8233e357aa8a391250
Because of recent changes to how coupons for the free tier are handled
(see commit 4c0817bcfb), we no longer want all these $10
non-expiring coupons. After coupons are applied during invoice
generation, if a customer does not have any valid (non expired, non
consumed) coupons, a new promotional coupon is applied.
We could just wait for users to consume all $10 of the non-expiring
coupons, and the new promotional coupon would be applied for the
following billing cycle, but this gets tricky, because if in the final
month, the user is billed for $1 of usage, but only $0.5 of the $10
non-expiring coupon is remaining, the user will be charged for the
remaining $0.5. With the new promotional coupon of $1.65, expiring every
month, this would not be an issue.
So long story short, this commit migrates all non-expiring coupons to
expire within 2 billing periods (all existing non-expiring coupons in
prod were created in early April or later). That way, there is still
enough value in the $10 coupon that we don't have to worry about
customers exceeding it, and the coupons will expire. Then we'll
immediately apply the $1.65 coupon for the next month! And then
hopefully this unfortunate situation will come to a pleasant end.
Change-Id: I8a593948d8876c41a71d886b9a95d4e2c802b4f3
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
Rather than applying our internal satellite implementation of coupons
when new accounts are created, use a configured Stripe coupon instead.
If no configuration is set, no coupon will be applied.
This change also removes logic for adding coupons to customers who pay
with crypto - they will already have the free tier coupon applied
anyway.
We will be phasing out our internal coupon implementation.
Change-Id: Ieb87ddb3412acbc74986aa9d18a4cbd93c29861a
The context passed into SendEmail gets canceled before links are clicked
in the test environment. This change passes an un-cancelable context
from SendRenderedAsync so that email sending/link clicking can be
completed even if the parent context is canceled.
Change-Id: I88535d315900d7886877f0e14d1d052745402ac7
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Add test with NotBefore and NotAfter restricted permission to verify that we don't have an access to bucket
Change-Id: I7ec98a5b02c0098ee7ec81034278398f4435f1cf
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
So far we were setting ZombieDeletionDeadline alwasy as nil and because of that DB default was never set. This change adds separate query for inserting object if deadline is not set.
Change-Id: I3d6a16570e7c74b5304e13edad8c7adcd021340c
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
Add an auto-generated table of content to the README for easy to find
and browser the documentation of the available API end points.
Change-Id: Id94d904cefd30449234224072ddc50a181aaba04
Currently nodeselection package only contained state for uploads, move
these to a subpackage, such that we can make another "downloadselection"
for downloads. Then move selection logic from overlay to nodeselection.
Change-Id: I0fc42bcae3a29db2728dae9f3863b1e95bf5165b
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
We are already adding the free tier coupons at the end of
InvoiceApplyCoupons, but there is a case where we will charge customers
who do not currently have a coupon the next time invoices are generated.
By applying the free tier coupon before preparing invoice project
records, we cover this case.
Once every customer has a coupon, it will be safe to remove this
functionality and only apply new coupons at the end of invoicing.
Change-Id: I65afbe5c0b84e63eeb1a0221e8d95311d87641a0
The DBs of our production satellites have some indexes that we didn't
have in the migrations because at that time we weren't able to add them
because our migration test was not able to deal with Cockroach indexes
with the STORING clause.
We have recently modified the storj.io/private/dbutil/pgutil package to
support the CRDB STRORING clause, so we are adding the missing indexes
to our migrations for being able to have them if we have to recover a DB
from scratch or we deploy a new DB satellite.
Change-Id: I686ff84e5b4c02d9615f50fa531261363affefb8
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
Allows us to remove the following files from satellite branding
repo, with an up-to-date single source of truth now in storj/storj:
* web/satellite/src/common/registrationSuccess.html
* web/satellite/src/common/registrationSuccess.scss
* web/satellite/src/views/register/registerArea.html
* web/satellite/src/views/register/registerArea.scss
The registrationSuccess files have been removed from all satellites in
the branding repository. The registerArea files have been removed only
from production satellites in the branding repository.
Importantly, this change enables the "resend email" functionality on
production satellites - previously, this functionality was available in
storj/storj, but not our branding repository.
Removes the config for VerificationPageURL, which redirected users away
from the satellite app to storj.io after creating an account. In order
for the email resend button to work, we cannot leave the app.
Adds a new config value for partner satellites, which replaces the
partner satellite names config. The new config includes name and
address. It is validated on setup/run to ensure it can be parsed.
Change-Id: I67db0702d9b9641f1a37b599f2929d56f3c33aca
For business accounts we need to track the sales contact.
It will be a question to business accounts during onboarding.
Change-Id: I8d101ce1b52091478dfb0ddd875e1cc717d765d3
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
There's a rare chance that `Stop` returns false, however doesn't have
time triggered. Use a non-blocking drain to remove the token.
Change-Id: I1ae18a197424017f0ca76656602709a029b56bfd
WHAT:
whitelist .storjshare.io domain for media-src CSP
WHY:
to enable video preview for linksharing
Change-Id: Ib673602d31ca116e7ce1cee0eba17099a55d7dbc
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
We need some chores to join without triggering the loop.
For example it's fine to run metrics, only when something else is
running.
Change-Id: I9d8bd16f59c28c540c8d72971bc4e233a8660c02
Currently the tool verifies:
* validity of plain_offset
* whether plain_size is smaller than encrypted_size
Change-Id: I9ec4fb5ead3356a196392c26ca377fcdb367138e
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
The original test caused the testplanet to timeout due to contact
service stuck in a loop. We can change it to only test the failure case for
PingBack method instead of closing the TCP port on storagenodes.
Change-Id: Ic96aee637b39ae95050c6902c2bf9ca51fb586c3
The test function fails randomly in the CI when runs with CRDB. There
isn't currently an explanation why the expectation of number of nodes
which exited 4 minutes ago reports 4 nodes rather than 5 and the only
clue that we have now to see if it gets remedied is to give 2 minutes
rather than 1 to the node that exited close to the time passed function
which makes the test to randomly fail.
Change-Id: I3a731e3eb7f19caebdf29713150727f2cf3e0e0a
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
QUIC
We want to encourage storagenodes to open their udp port. This PR
changes contact service in satellite to try to connect to nodes through
QUIC. If satellite can't reach nodes through quic, it will send an error
message back to nodes. On the nodes side, it will always log out error
message from check in if the error message is not empty.
Whether satellite can reach nodes through quic has no affect on nodes'
uptime check.
Change-Id: I5ebf80f921c4a6504997d83c8bd45226da9d3703
The cursor was not being used in the batch deletion.
The stream ID was not being used while deleting, which could in rare
circumstaces delete a newly uploaded object.
Use the stream id in deletion, rather than passing that information from
one query to another.
Change-Id: I03271c6e72747e345dfb0bb70989f29e835efd8e
Co-authored-by: littleskunk <jens.heimbuerge@googlemail.com>
Co-authored-by: JT Olio <hello@jtolio.com>
Co-authored-by: Igor <38665104+ihaid@users.noreply.github.com>
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
During metainfo refactor we disabled some validation as it was designed to validate pointer. Now part of this validation is restored. This is first part.
Change-Id: I6132f922fe23d60118bbccfdb77fd93c3c81afed
Currently metrics could trigger metainfo loop on it's own on GC pod,
however running only metrics adds a lot of load, we should only run it
together with other essential chores.
There's no easy way to join that way in metainfo loop, for now, let's
remove it from GC. Satellite Core will still run the metrics.
Change-Id: Ie513a9d2f86add0aa319d08567c6cf3542d73d4e
Document the fields that migrated objects have missing, it's easy to
forget that they might not exist.
Avoid downloading the segment, if we're not sure whether it's the
correct one. We'll later improve the code with an heuristic to get a
best guess, which segment to download.
Change-Id: I12395c17bbf0edf25e0d00c8d072fce6085e303b
If a visitor to the website (run through the reverse proxy) consented to
cookies, read the ID stored in that cookie and send it along with the
Identify/Track calls sent to Segment upon account creation. This allows
us to connect referral information gathered when visitors land on our
website with account activity, helping us improve our onboarding flow.
Change-Id: I0ece717ab5bba67901e50a9b4229c1d4ed7e46b7
We can be more precise and conservative by using the backend
satellite/analytics service. We also no longer need client-side Segment
scripts.
Change-Id: Ic5fb18bea2d388b586ad773e26027d69bde87294
* satellite/analytics: Add analytics for user signed in, project created and access grant created events
Co-authored-by: Moby von Briesen <mobyvb@gmail.com>
We recently added create_at column to segments table.
Old segments needs to get this value from objects table.
This tool will iterate over all objects and update corresponding
segments if create_at column is not set.
Change-Id: Ib5aedc384637e739ee9af84454af0639e2559416
This is a very simple endpoint which allows the satellite UI client to
notify the console server that an event has occurred. We will use this
to track when users have completed certain tasks that can't be tracked
server-side (e.g. generating gateway credentials, setting a passphrase)
As part of this change, one client side event is implemented to use the
endpoint - when the user clicks the button to create gateway credentials
after making a new access grant.
Change-Id: Ic8fa729f1c84474788e1de84c18532aef8e8fa3c
When object doesn't contain segments the implementation would have
returned []*pb.SegmentDownloadResponse{nil} instead of nil.
Change-Id: If38f6d3d9d119f514f63ad1a8762055f657f3004
Add endpoint for getting object information, list segments in a range
and download the first segment in the range.
Change-Id: I056d697ae87c9aa34e7deccba8713902db260457
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
Repair checker expects to have information about CreatedAt and RepairedAt fields to calculate segment age metric.
Change-Id: I6b41df880d77133be541e14d10d91cc75759b339
Currently we can have an error about duplicated entry while inserting into value_attributions table. This change is changing simple insert into insert that is doing nothing on conflict.
Change-Id: I3efd8dc0b63115e8e2ed8f4196ccf969ee942295
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
we want to know a lot more about what's going on during
the operation of the metainfo loop. this patchset adds
more instrumentation to previously unmonitored but
interesting functions, and adds metrics that keep track
of how far through a specific loop we are. it also
adds mon:lock annotations, especially to the metainfo
loop run task, which recently changed, silently broke
some queries, and thus failed to alert us to spiking
run time issues.
Change-Id: I4358e2f2293d8ebe30eef497ba4e423ece929041
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
- add Credit History table to billing acount page and set up ui for a user adding promo codes
- implement promo codes ui in registration form
- add feature flag to handle if coupon code ui should be rendered
Change-Id: I9fdeef7cffc7901958d3f9be335e1115b2471a2e
* Set up basic structure of new service.
* Implement a basic analytics track event for user creation.
Change-Id: Ica8c785540b1ef9d848404af307a22f21d33c6aa
We were using two queries to delete one or more objects and its/their
segments in DeleteObjectExactVersion, DeletePendingObject, DeleteObjectLatestVersion,
DeleteObjectAnyStatusAllVersions,DeleteObjectsAllVersions.
This change delete objects and their segments in one query.
Change-Id: Ib2c0eb501f00b091ee32519e02155350c4dcb8b0
We have a use case for this in ListSegments. ListSegments is going to
return the EncryptedETag along with EncryptedKey and EncryptedKeyNonce.
It also must return the EncryptionParameters.
Since the EncryptionParameters are in the objects DB table, it would be
more efficient for ListSegment to avoid querying that DB table, but take
it from the SatStreamID.
Change-Id: I16c98641c0fe0c98e3303329d0da6ef137ca55cf
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
WHAT:
new endpoint to be able to delete apiKey/accessGrant by name and project id
WHY:
it will be called to delete special pregenerated access grant which will be used to generate gateway credentials for file browser component or bucket management
Change-Id: I7467ebaab27a7da33efd062536c6da41e6ed4c30
We are implementing the free tier, which will give all new users 3
projects, 50gb storage, and 50gb bandwidth per project. All users will
receive a recurring coupon to cover this amount of usage.
With the free tier, we no longer need a paywall. Users will not need to
enter a payment method unless they want to increase their project or
usage limits.
Change-Id: If3b026e91858e5f557a2758e366616cecc8f21c7
