This method is sometimes ends with transaction error. Most probably
because it's trying to do full table scan on nodes table which is
heavily used. Adding AOST should help with DB contention.
Change-Id: Ibd4358d28dc26922b60c6b30862f20e7c0662cd1
When we do `satellite run api --placement '...'`, the placement rules are not parsed well.
The problem is based on `viper.AllSettings()`, and the main logic is sg. like this (from a new unit test):
```
r := ConfigurablePlacementRule{}
err := r.Set(p)
require.NoError(t, err)
serialized := r.String()
r2 := ConfigurablePlacementRule{}
err = r2.Set(serialized)
require.NoError(t, err)
require.Equal(t, p, r2.String())
```
All settings evaluates the placement rules in `ConfigurablePlacementRules` and stores the string representation.
The problem is that we don't have proper `String()` implementation (it prints out the structs instead of the original definition.
There are two main solutions for this problem:
1. We can fix the `String()`. When we parse a placement rule, the `String()` method should print out the original definition
2. We can switch to use pure string as configuration parameter, and parse the rules only when required.
I feel that 1 is error prone, we can do it (and in this patch I added a lot of `String()` implementations, but it's hard to be sure that our `String()` logic is inline with the parsing logic.
Therefore I decided to make the configuration value of the placements a string (or a wrapper around string).
That's the main reason why this patch seems to be big, as I updated all the usages.
But the main part is in beginning of the `placement.go` (configuration parsing is not a pflag.Value implementation any more, but a separated step).
And `filter.go`, (a few more String implementation for filters.
https://github.com/storj/storj/issues/6248
Change-Id: I47c762d3514342b76a2e85683b1c891502a0756a
as GetParticipatingNodes and GetNodes, respectively.
We now want these functions to include offline and suspended nodes as
well, so that we can force immediate repair when pieces are out of
placement or in excluded countries. With that change, the old names no
longer made sense.
Change-Id: Icbcbad43dbde0ca8cbc80a4d17a896bb89b078b7
As I learned, the `Include` supposed to communicate that some internal change also "included" to the filters during the check -> filters might be stateful.
But it's not the case any more after 552242387, where we removed the only one stateful filter.
Change-Id: I7c36ddadb2defbfa3b6b67bcc115e4427ba9e083
Once uppon a time, at the dawn of the implementation of Storj, when all the nodes are read from the database directly, every time.
After a while -- due to performance reasons -- it has been changed for upload and download: where all the nodes are read for a short period of time, and used from memory.
This is the version which was improved recently to support advanced node selections using placement.
But stil we have an old configuration value `service.config.NodeSelectionCache.Disabled`, and the db based implementation: `service.FindStorageNodesWithPreferences(ctx, req, &service.config.Node)`.
For safety, we need to remove this option, to make sure that we use the cache, which has the advanced features.
This patch was supposed to be a very small one (just removing a method and a config: https://review.dev.storj.io/c/storj/storj/+/11074/1/satellite/overlay/service.go), but it turned out that we need to update a lot of unit tests.
These unit tests used the old implementation (which is not used in production any more).
The tests which used both implementation are just updated to use only the new one
The tests which used only the old implementation are refactored (but keeping the test cases).
Using real unit tests (without DB, working on OSX, fast)
Closes https://github.com/storj/storj/issues/6217
Change-Id: I023f92c7e34235665cf8474513e67b2fcc4763eb
We would like to make it easier to accept multiple annotations.
Examples:
```
country("GB") && annotation(...)
annotated(annotated(X,...),...)
```
Change-Id: I92e622e8b985b314dadddf83b17976c245eb2069
This patch is a oneliner: rangedloop checker should check the subnets only if it's not turned off with placement annotation.
(see in satellite/repair/checker/observer.go).
But I didn't find any unit test to cover that part, so I had to write one, and I prefered to write it as a unit test not an integration test, which requires a mock repair queue (observer_unit_test.go mock.go).
Because it's small change, I also included a small change: creating a elper method to check if AutoExcludeSubnet annotation is defined
Change-Id: I2666b937074ab57f603b356408ef108cd55bd6fd
10 --> node tag inclusion in raw format
11 --> same, but using same subnet is enabled
12 --> same as 11 but with US restrictions
Change-Id: I20792689e0caf5fe190f566a770d70c3b3824793
It's statefull, therefore it can hit naive users. (NodeFilters couldn't be reused for more than one iterations).
But looks like we don't need it, as `SelectBySubnet` doest the same job.
Change-Id: Ie85b7f9c2bd9a47293f4e3b359f8b619215c7649
This patch makes it easier to configure existing placement rules only with string.
1. placement(n) rule can be used to reuse earlier definitions
2 .&& can be used in addition to all(n1,n2)
3. country(c) accepts exclusions (like '!RU'), regions ('EU','EEA'), all and none
See the 'full example' unit test, which uses all of these, in a realistic example.
https://github.com/storj/storj/issues/6126
Change-Id: Ica76f016ebd002eb7ea8103d4258bacd6a6d77bf
There are cases when we would like to override the default placement=0 rule.
For example when we would like to exclude tagged nodes from the selection (by default).
Therefore we couldn't use a shortcut any more, we should always check the placement rules, even if we use placement=0.
TODO: we need to update common, and rename `EveryCountry` to `DefaultPlacement`, just to avoid confusion.
https://github.com/storj/storj/issues/6126
Change-Id: Iba6c655bd623e04351ea7ff91fd741785dc193e4
Current node selection logic (in case of using SelectBySubnet):
1. selects one subnet randomly
2. selects one node randomly from the subnet
3. applies the placement NodeFilters to the node and ignore it, if doesn't match
This logic is wrong:
1. Imagine that we have a subnet with two DE and one GB nodes.
2. We would like to select DE nodes
2. In case of GB node is selected (randomly) in step2, step3 will ignore the subnet, even if there are good (DE) nodes in there.
Change-Id: I7673f52c89b46e0cc7b20a9b74137dc689d6c17e
stats/size/count is not used by any production code, and it's not required, as we can assert the state with other checks.
real motivation: next commits will make the Selector of the State configurable, therefore we won't have one single Stat, it depends on the request parameters.
(we plan to support both network and id based randomization)
Change-Id: I631828fc0046d2fef5b7a674fc0268a0446e9655
* Handle failed country code conversion.
* Avoid potential issues with a data-race due to shared slice.
Updates #6028
Change-Id: If7beef2619abd084e1f4109de2d323f834a6090a
Currently, we have issue were while counting unhealthy pieces we are
counting twice piece which is in excluded country and is outside segment
placement. This can cause unnecessary repair.
This change is also doing another step to move RepairExcludedCountryCodes
from overlay config into repair package.
Change-Id: I3692f6e0ddb9982af925db42be23d644aec1963f
placement.AllowedCountry is the old way to specify placement, with the new approach we can use a more generic (dynamic method), which can check full node information instead of just the country code.
The 90% of this patch is just search and replace:
* we need to use NodeFilters instead of placement.AllowedCountry
* which means, we need an initialized PlacementRules available everywhere
* which means we need to configure the placement rules
The remaining 10% is the placement.go, where we introduced a new type of configuration (lightweight expression language) to define any kind of placement without code change.
Change-Id: Ie644b0b1840871b0e6bbcf80c6b50a947503d7df
All the files in uploadselection are (in fact) related to generic node selection, and used not only for upload,
but for download, repair, etc...
Change-Id: Ie4098318a6f8f0bbf672d432761e87047d3762ab
ReliabilityCache will be now using refactored overlay Reliable method.
This method will provide more info about nodes (e.g. country code) and
with this we are able to add two dedicated methods to classify pieces:
* OutOfPlacementPieces
* PiecesNodesLastNetsInOrder
With those new method we will fix issue where offline but reliable node
won't be checked for clumped pieces and off placement pieces.
https://github.com/storj/storj/issues/5998
Change-Id: I9ffbed9f07f4881c9db3bd0e5f0412f1a418dd82
Currently we are using Reliable to get missing pieces for repair
checker. The issue is that now checker is looking at more things than
just missing pieces (clumped/off, placement pieces) and using only node
ID is not enough. We have issue where we are skipping offline nodes from
clumped and off placement pieces check.
Reliable was refactored to get data (e.g. country, lastNet) about all
reliable nodes. List is split into online and offline. This data will be
cached for quick use by repair checker. It will be also possible to
check nodes metadata like country code or lastNet.
We are also slowly moving `RepairExcludedCountryCodes` config from
overlay to repair which makes more sens for it.
This this first part of changes.
https://github.com/storj/storj/issues/5998
Change-Id: If534342488c0e440affc2894a8fbda6507b8959d
We use two different Node types in `overlay` and `uploadnodeselection` and converting back and forth.
Using the same object would allow us to use a unified node selection interface everywhere.
Change-Id: Ie71e29d60184ee0e5b4547eb54325f09c418f73c
Currently we are using KnownUnreliableOrOffline to get missing pieces
for segment repairer (GetMissingPieces). The issue is that now repairer
is looking at more things than just missing pieces (clumped/off
placement pieces).
KnownReliable was refactored to get data (e.g. country, lastNet) about
all reliable nodes from provided list. List is split into online and
offline. This way we will be able to use results from this method to all
checks: missing pieces, clumped pieces, out of placement pieces.
This this first part of changes to handle different kind of pieces in
segment repairer.
https://github.com/storj/storj/issues/5998
Change-Id: I6cbaf59cff9d6c4346ace75bb814ccd985c0e43e
For now we will use bucket placement to determine if we should exclude
some node IPs from metainfo.GetObjectIPs results. Bucket placement is
retrieved directly from DB in parallel to metabase
GetStreamPieceCountByNodeID request.
GetObjectIPs is not heavily used so additional request to DB shouldn't
be a problem for now.
https://github.com/storj/storj/issues/5950
Change-Id: Idf58b1cfbcd1afff5f23868ba2f71ce239f42439
We would like to verify if nodes matches specific placement e.g. to
validate segment pieces are correctly geofenced.
https://github.com/storj/storj/issues/5896
Change-Id: I842767dccc121a3c60224f677ab55e5dc150c76e
Methods SelectAllStorageNodesUpload and SelectAllStorageNodesDownload
are not returning full info with overlay.SelectedNode because its
missing CountryCode.
Change-Id: Ie3cb396bf28d7ec4c6ab8927e5bb560236036aa6
We were using the UploadSelectionCache previously, which does _not_ have
all nodes, or even all online nodes, in it. So all nodes with less than
MinimumVersion, or with less than MinimumDiskSpace, or nodes suspended
for unknown audit errors, or nodes that have started graceful exit, were
all missing, and ended up having empty last_nets. Even with all that,
I'm kind of surprised how many nodes this involved, but using the upload
selection cache was definitely wrong.
This change uses the download selection cache instead, which excludes
nodes only when they are disqualified, gracefully exited (completely),
or offline.
Change-Id: Iaa07c988aa29c1eb05796ac48a6f19d69f5826c1
The query for GetNodesNetworkInOrder is causing far too much load on the
database. Since it is not critical that the repair checker have
perfectly up-to-date node network information, we can use a cache
instead.
Change-Id: I07ad45bfdeb46529da093941a06c2da8a00ce878
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
We have a specific issue that a user uploaded a file to a bucket
geo-fenced to EU and one of the pieces appeared to be on a node in the
US. The country code of this node is set to SE (Sweden) in the satellite
DB. It turns out that some time ago MaxMind changed the country code of
this node's IP from Sweden to US, but this change hasn't been reflected
in the satellite's database.
So far the satellite updates the country code of a node only if its IP
changes. It was assumed that if the IP does not change, its country code
shouldn't change too. This turned to be a wrong assumption.
With this change, the satellite will look up the MaxMindDB on every
check-in to see if the country code of the node's IP has changed.
Change-Id: Icdf659b09be9fc6ad14601902032b35ba5ea78c4
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
this change uses the new storj/common noise helpers, which:
* add a security fix (require an expected node id for validating
noise key attestations)
* stops doing an unnecessary order signature validation (it's
already been done inside of PutPiece)
* removes some duplicate code
Change-Id: I5e67a08ff216cd9c5b0b82e40b4d9de664b6b0fc
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds a method to the overlay allowing the caller to set the
contained status of all nodes in the nodes table at once. This is valid
because our definition of "contained" now depends solely on whether a
node appears at least once in the reverification queue. Only rows whose
contained field does not match the expectation will be updated; the
contained timestamp will not be updated for a node which is supposed to
be contained and was already contained.
Change-Id: I8cabe56ad897b6027e11aa5b17175295391aa3ac
we have two more fields in the database (noise_proto and
noise_public_key) that now need to go into pb.NodeAddress when
returning AddressedOrderLimits.
the only real complication is making sure type conversions between
database types and NodeURLs and so on don't lose this new
pb.NodeAddress field (NoiseInfo). otherwise this is a relatively
straightforward commit
Change-Id: I45b59d7b2d3ae21c2e6eb95497f07cd388d454b3
