This change adds request IDs to requests, logs them as part of audit
logs and sends to the client on error. This is to improve debugging
of customer issues.
Issue: https://github.com/storj/storj/issues/5898
Change-Id: I801514b547d28d810552d91aa7c8502051e552bf
This change creates the ability to run a server separate from the
console web server to serve the front end app. You can run it with
`satellite run ui`. Since there are now potentially two servers instead
of one, the UI server has the option to act as a reverse proxy to the
api server for local development by setting `--console.address` to the
console backend address and `--console.backend-reverse-proxy` to the
console backend's http url. Also, a feature flag has been implemented
on the api server to retain the ability to serve the front end app. It
is toggled with `--console.frontend-enable`.
github issue: https://github.com/storj/storj/issues/5843
Change-Id: I0d30451a20636e3184110dbe28c8a2a8a9505804
Having separate process/pod only for sending bloom filters once a week
is a bit waste. After reconfiguring production settings to use sender in
core we can remove also GC sender peer code.
https://github.com/storj/storj/issues/5979
Change-Id: I6efe3ec073f96545e1f70ad13843f8ccdf923ee8
placement.AllowedCountry is the old way to specify placement, with the new approach we can use a more generic (dynamic method), which can check full node information instead of just the country code.
The 90% of this patch is just search and replace:
* we need to use NodeFilters instead of placement.AllowedCountry
* which means, we need an initialized PlacementRules available everywhere
* which means we need to configure the placement rules
The remaining 10% is the placement.go, where we introduced a new type of configuration (lightweight expression language) to define any kind of placement without code change.
Change-Id: Ie644b0b1840871b0e6bbcf80c6b50a947503d7df
There are many case where the keywords `free` and `available`
are confused in their usage.
For most cases, `free` space is the amount of free space left
on the whole disk, and not just in allocation while
`available` space is the amount of free space left in the
allocated disk space.
What the user/sno wants to see is not the free space but the
available space. To the SNO, free space is the free space
left in the allocated disk space.
Because of this confusion, the multinode dashboard displays
the `free` disk space instead of the free space in the
allocated disk space https://github.com/storj/storj/issues/5248
While the storagenode dashboard shows the correct free space
in the allocation.
This change fixes the wrong free disk space. I also added a
few comments to make a distinction between the `free`
and `available` fields in the `DiskSpace*` structs.
Change-Id: I11b372ca53a5ac05dc3f79834c18f85ebec11855
Currently we are using Reliable to get missing pieces for repair
checker. The issue is that now checker is looking at more things than
just missing pieces (clumped/off, placement pieces) and using only node
ID is not enough. We have issue where we are skipping offline nodes from
clumped and off placement pieces check.
Reliable was refactored to get data (e.g. country, lastNet) about all
reliable nodes. List is split into online and offline. This data will be
cached for quick use by repair checker. It will be also possible to
check nodes metadata like country code or lastNet.
We are also slowly moving `RepairExcludedCountryCodes` config from
overlay to repair which makes more sens for it.
This this first part of changes.
https://github.com/storj/storj/issues/5998
Change-Id: If534342488c0e440affc2894a8fbda6507b8959d
Add some code to generate a basic markdown file documenting a generated
API. Generate this document for the API in
satellite/console/consoleweb/consoleapi/gen.
The documentation is not completely correct, as it may include some
values in the request body that are not actually usable by the
requester. This can be fixed by making sure all types used within the
generated API are properly annotated with `json` tags.
Issue: https://github.com/storj/storj-private/issues/244
Change-Id: I57b259967fb0db8f548b6598a10c825da15ba723
this is a very old tool built in the very early days
of v3, when we didn't know how the network would be
used. this tool anticipated being able to query remote
nodes for internal state. we don't do that. i don't
think anyone uses this.
Change-Id: Ie1ded3ecbedb09313f2d6fc721039e0f15e4ee85
The query for GetNodesNetworkInOrder is causing far too much load on the
database. Since it is not critical that the repair checker have
perfectly up-to-date node network information, we can use a cache
instead.
Change-Id: I07ad45bfdeb46529da093941a06c2da8a00ce878
By implementing a simpler Range, we can get rid of many methods
defined for storage.KeyValueStore.
Initially KeyValueStore was used to manage objects, hence it required
much more complex behaviour. However, we've moved away from this
implementation, hence we can significantly simplify everything.
Change-Id: Iaaa8c9c83d8601ad3c894767f17c0f5b356f7253
The blobstore implementation is entirely related to storagenode, so the
rightful place is together with the storagenode implementation.
Fixes https://github.com/storj/storj/issues/5754
Change-Id: Ie6637b0262cf37af6c3e558556c7604d9dc3613d
With this change we are replacing parsing code with existing go-redis
util.
We also switch redis client to version 9.
Change-Id: Ie4a651e3ae6960e68958c690873925d319b70e10
This flag was in general one time switch to enable versions internally.
New we can remove it as it makes code more complex.
Change-Id: I740b6e8fae80d5fac51d9425793b02678357490e
to support TCP_FAST_OPEN, we're considering just using
two TCP connections in parallel per request, one with
and one without. this allows us to safely fire both
concurrently without stressing out the node too much.
see https://review.dev.storj.io/c/storj/storj/+/9933
Change-Id: I9aa8a0252350db5ace04ee125bfe469203e980ec
The code responsible for generating TypeScript classes has been
separated from the rest of the TypeScript generation code so that other
packages may take advantage of this functionality.
References #5494
Change-Id: I97eabd430bd6a5f748eafaf8b1d783977e75e660
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
This commit introduces tests that perform multiple concurrent audits
against the same storage node, to make sure that doing so does not
create incorrect outcomes.
Refs: https://github.com/storj/storj/issues/5495
Change-Id: Iaae49e042306bfa59bdf04c1a1540667488e51e5
this change uses the new storj/common noise helpers, which:
* add a security fix (require an expected node id for validating
noise key attestations)
* stops doing an unnecessary order signature validation (it's
already been done inside of PutPiece)
* removes some duplicate code
Change-Id: I5e67a08ff216cd9c5b0b82e40b4d9de664b6b0fc
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds the actual chore.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Id78b40bf69fae1ac39010e3b553315db8a1472bd
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
Testplanet tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because
currently we have multiple queries which are doing full table scan and it's not trivial to change.
https://github.com/storj/storj/issues/5471
Change-Id: Ia2fcbfb9102424d58f95e00071329454a8c1066e
Satellite DB tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because currently
we have multiple queries which are doing full table scan and it's not
trivial to change.
We may change that behavior when we will figure out how to skip
specific query from detection or we will fix all problematic queries.
https://github.com/storj/storj/issues/5471
Change-Id: Icafe782257a0d353e8bcdf6fa8a19c20b1091a0b
The previous test relied on timing, but instead let's try dialing
the server and see whether we can do something with the connection.
We probably should test all the supported protocols instead of just tcp.
Change-Id: I9217494859faea0a7b93515aad706da4fdd8a140
Our DB support in storj/private was updated to enable basic context
support for executing SQL queries. This change requires some small
adjustments as not all parts were working correctly.
storj/private commit with change:
4bc77107b7acfcc2f7ad65796d5dd3d7c64801e4
Change-Id: I64d7ed92788ea0920d12cecd1aa0e414720e9b9c
