storj/satellite/repair/repair_test.go

711 lines
24 KiB
Go
Raw Normal View History

2019-04-08 18:33:47 +01:00
// Copyright (C) 2019 Storj Labs, Inc.
// See LICENSE for copying information.
package repair_test
2019-04-08 18:33:47 +01:00
import (
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
"context"
"io"
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
"math"
2019-04-08 18:33:47 +01:00
"testing"
"github.com/stretchr/testify/require"
"go.uber.org/zap"
2019-04-08 18:33:47 +01:00
"storj.io/storj/internal/memory"
"storj.io/storj/internal/testcontext"
"storj.io/storj/internal/testplanet"
2019-07-01 17:39:04 +01:00
"storj.io/storj/internal/testrand"
2019-04-08 18:33:47 +01:00
"storj.io/storj/pkg/pb"
"storj.io/storj/pkg/storj"
"storj.io/storj/satellite"
"storj.io/storj/satellite/overlay"
"storj.io/storj/storage"
"storj.io/storj/storagenode"
2019-04-08 18:33:47 +01:00
"storj.io/storj/uplink"
)
// TestDataRepair does the following:
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
// - Uploads test data
// - Kills some nodes and disqualifies 1
// - Triggers data repair, which repairs the data from the remaining nodes to
// the numbers of nodes determined by the upload repair max threshold
// - Shuts down several nodes, but keeping up a number equal to the minim
// threshold
// - Downloads the data from those left nodes and check that it's the same than
// the uploaded one
2019-04-08 18:33:47 +01:00
func TestDataRepair(t *testing.T) {
const RepairMaxExcessRateOptimalThreshold = 0.05
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
2019-04-08 18:33:47 +01:00
testplanet.Run(t, testplanet.Config{
SatelliteCount: 1,
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
StorageNodeCount: 14,
2019-04-08 18:33:47 +01:00
UplinkCount: 1,
Reconfigure: testplanet.Reconfigure{
Satellite: func(log *zap.Logger, index int, config *satellite.Config) {
config.Overlay.Node.OnlineWindow = 0
config.Repairer.MaxExcessRateOptimalThreshold = RepairMaxExcessRateOptimalThreshold
},
},
2019-04-08 18:33:47 +01:00
}, func(t *testing.T, ctx *testcontext.Context, planet *testplanet.Planet) {
// first, upload some remote data
2019-07-22 20:10:04 +01:00
uplinkPeer := planet.Uplinks[0]
satellite := planet.Satellites[0]
// stop discovery service so that we do not get a race condition when we delete nodes from overlay
satellite.Discovery.Service.Discovery.Stop()
satellite.Discovery.Service.Refresh.Stop()
// stop audit to prevent possible interactions i.e. repair timeout problems
satellite.Audit.Worker.Loop.Pause()
2019-04-08 18:33:47 +01:00
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Pause()
2019-04-08 18:33:47 +01:00
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
var (
testData = testrand.Bytes(8 * memory.KiB)
minThreshold = 3
successThreshold = 7
)
err := uplinkPeer.UploadWithConfig(ctx, satellite, &uplink.RSConfig{
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
MinThreshold: minThreshold,
RepairThreshold: 5,
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
SuccessThreshold: successThreshold,
2019-09-06 23:02:01 +01:00
MaxThreshold: 9,
2019-04-08 18:33:47 +01:00
}, "testbucket", "test/path", testData)
require.NoError(t, err)
pointer, path := getRemoteSegment(t, ctx, satellite)
2019-04-08 18:33:47 +01:00
// calculate how many storagenodes to kill
redundancy := pointer.GetRemote().GetRedundancy()
minReq := redundancy.GetMinReq()
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
remotePieces := pointer.GetRemote().GetRemotePieces()
2019-04-08 18:33:47 +01:00
numPieces := len(remotePieces)
// disqualify one storage node
toDisqualify := 1
toKill := numPieces - toDisqualify - int(minReq)
require.True(t, toKill >= 1)
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
maxNumRepairedPieces := int(
math.Ceil(
float64(successThreshold) * (1 + RepairMaxExcessRateOptimalThreshold),
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
),
)
numStorageNodes := len(planet.StorageNodes)
// Ensure that there are enough storage nodes to upload repaired segments
require.Falsef(t,
(numStorageNodes-toKill-toDisqualify) < maxNumRepairedPieces,
"there is not enough available nodes for repairing: need= %d, have= %d",
maxNumRepairedPieces, (numStorageNodes - toKill - toDisqualify),
)
2019-04-08 18:33:47 +01:00
// kill nodes and track lost pieces
nodesToKill := make(map[storj.NodeID]bool)
nodesToDisqualify := make(map[storj.NodeID]bool)
2019-04-08 18:33:47 +01:00
nodesToKeepAlive := make(map[storj.NodeID]bool)
var numDisqualified int
2019-04-08 18:33:47 +01:00
for i, piece := range remotePieces {
if i >= toKill {
if numDisqualified < toDisqualify {
nodesToDisqualify[piece.NodeId] = true
numDisqualified++
}
2019-04-08 18:33:47 +01:00
nodesToKeepAlive[piece.NodeId] = true
continue
}
nodesToKill[piece.NodeId] = true
}
for _, node := range planet.StorageNodes {
if nodesToDisqualify[node.ID()] {
disqualifyNode(t, ctx, satellite, node.ID())
continue
}
2019-04-08 18:33:47 +01:00
if nodesToKill[node.ID()] {
err = planet.StopPeer(node)
require.NoError(t, err)
_, err = satellite.Overlay.Service.UpdateUptime(ctx, node.ID(), false)
require.NoError(t, err)
2019-04-08 18:33:47 +01:00
}
}
satellite.Repair.Checker.Loop.Restart()
satellite.Repair.Checker.Loop.TriggerWait()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Restart()
satellite.Repair.Repairer.Loop.TriggerWait()
satellite.Repair.Repairer.Loop.Pause()
satellite.Repair.Repairer.Limiter.Wait()
2019-04-08 18:33:47 +01:00
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
// repaired segment should not contain any piece in the killed and DQ nodes
metainfoService := satellite.Metainfo.Service
2019-07-22 20:10:04 +01:00
pointer, err = metainfoService.Get(ctx, path)
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
require.NoError(t, err)
2019-04-08 18:33:47 +01:00
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
nodesToKillForMinThreshold := len(remotePieces) - minThreshold
remotePieces = pointer.GetRemote().GetRemotePieces()
for _, piece := range remotePieces {
require.NotContains(t, nodesToKill, piece.NodeId, "there shouldn't be pieces in killed nodes")
require.NotContains(t, nodesToDisqualify, piece.NodeId, "there shouldn't be pieces in DQ nodes")
require.Nil(t, piece.Hash, "piece hashes should be set to nil")
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
// Kill the original nodes which were kept alive to ensure that we can
// download from the new nodes that the repaired pieces have been uploaded
if _, ok := nodesToKeepAlive[piece.NodeId]; ok && nodesToKillForMinThreshold > 0 {
stopNodeByID(t, ctx, planet, piece.NodeId)
nodesToKillForMinThreshold--
2019-04-08 18:33:47 +01:00
}
}
// we should be able to download data without any of the original nodes
newData, err := uplinkPeer.Download(ctx, satellite, "testbucket", "test/path")
require.NoError(t, err)
require.Equal(t, newData, testData)
})
}
// TestCorruptDataRepair does the following:
// - Uploads test data
// - Kills all but the minimum number of nodes carrying the uploaded segment
// - On one of the remaining nodes, corrupt the piece data being stored by that node
// - Triggers data repair, which attempts to repair the data from the remaining nodes to
// the numbers of nodes determined by the upload repair max threshold
// - Expects that the repair failed and the pointer was not updated
func TestCorruptDataRepair(t *testing.T) {
const RepairMaxExcessRateOptimalThreshold = 0.05
testplanet.Run(t, testplanet.Config{
SatelliteCount: 1,
StorageNodeCount: 14,
UplinkCount: 1,
Reconfigure: testplanet.Reconfigure{
Satellite: func(log *zap.Logger, index int, config *satellite.Config) {
config.Overlay.Node.OnlineWindow = 0
config.Repairer.MaxExcessRateOptimalThreshold = RepairMaxExcessRateOptimalThreshold
},
},
}, func(t *testing.T, ctx *testcontext.Context, planet *testplanet.Planet) {
uplinkPeer := planet.Uplinks[0]
satellite := planet.Satellites[0]
// stop discovery service so that we do not get a race condition when we delete nodes from overlay
satellite.Discovery.Service.Discovery.Stop()
satellite.Discovery.Service.Refresh.Stop()
// stop audit to prevent possible interactions i.e. repair timeout problems
satellite.Audit.Worker.Loop.Pause()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Pause()
var testData = testrand.Bytes(8 * memory.KiB)
// first, upload some remote data
err := uplinkPeer.UploadWithConfig(ctx, satellite, &uplink.RSConfig{
MinThreshold: 3,
RepairThreshold: 5,
SuccessThreshold: 7,
2019-09-06 23:02:01 +01:00
MaxThreshold: 9,
}, "testbucket", "test/path", testData)
require.NoError(t, err)
pointer, path := getRemoteSegment(t, ctx, satellite)
// calculate how many storagenodes to kill
redundancy := pointer.GetRemote().GetRedundancy()
minReq := redundancy.GetMinReq()
remotePieces := pointer.GetRemote().GetRemotePieces()
numPieces := len(remotePieces)
toKill := numPieces - int(minReq)
require.True(t, toKill >= 1)
// kill nodes and track lost pieces
nodesToKill := make(map[storj.NodeID]bool)
originalNodes := make(map[storj.NodeID]bool)
var corruptedNode *storagenode.Peer
var corruptedNodeID storj.NodeID
var corruptedPiece storj.PieceID
for i, piece := range remotePieces {
originalNodes[piece.NodeId] = true
if i >= toKill {
// this means the node will be kept alive for repair
// choose a node and pieceID to corrupt so repair fails
if corruptedNodeID.IsZero() || corruptedPiece.IsZero() {
corruptedNodeID = piece.NodeId
corruptedPiece = pointer.GetRemote().RootPieceId.Derive(corruptedNodeID, piece.PieceNum)
}
continue
}
nodesToKill[piece.NodeId] = true
}
require.NotNil(t, corruptedNodeID)
require.NotNil(t, corruptedPiece)
for _, node := range planet.StorageNodes {
if node.ID() == corruptedNodeID {
corruptedNode = node
}
if nodesToKill[node.ID()] {
err = planet.StopPeer(node)
require.NoError(t, err)
_, err = satellite.Overlay.Service.UpdateUptime(ctx, node.ID(), false)
require.NoError(t, err)
}
}
require.NotNil(t, corruptedNode)
blobRef := storage.BlobRef{
Namespace: satellite.ID().Bytes(),
Key: corruptedPiece.Bytes(),
}
overlay := planet.Satellites[0].Overlay.Service
node, err := overlay.Get(ctx, corruptedNodeID)
require.NoError(t, err)
corruptedNodeReputation := node.Reputation
// get currently stored piece data from storagenode
reader, err := corruptedNode.Storage2.BlobsCache.Open(ctx, blobRef)
require.NoError(t, err)
pieceSize, err := reader.Size()
require.NoError(t, err)
require.True(t, pieceSize > 0)
pieceData := make([]byte, pieceSize)
n, err := io.ReadFull(reader, pieceData)
require.NoError(t, err)
require.EqualValues(t, n, pieceSize)
// delete piece data
err = corruptedNode.Storage2.BlobsCache.Delete(ctx, blobRef)
require.NoError(t, err)
// corrupt piece data (not PieceHeader) and write back to storagenode
// this means repair downloading should fail during piece hash verification
pieceData[pieceSize-1]++ // if we don't do this, this test should fail
writer, err := corruptedNode.Storage2.BlobsCache.Create(ctx, blobRef, pieceSize)
require.NoError(t, err)
n, err = writer.Write(pieceData)
require.NoError(t, err)
require.EqualValues(t, n, pieceSize)
err = writer.Commit(ctx)
require.NoError(t, err)
satellite.Repair.Checker.Loop.Restart()
satellite.Repair.Checker.Loop.TriggerWait()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Restart()
satellite.Repair.Repairer.Loop.TriggerWait()
satellite.Repair.Repairer.Loop.Pause()
satellite.Repair.Repairer.Limiter.Wait()
// repair should update audit status as fail
node, err = overlay.Get(ctx, corruptedNodeID)
require.NoError(t, err)
require.Equal(t, corruptedNodeReputation.AuditCount+1, node.Reputation.AuditCount)
require.True(t, corruptedNodeReputation.AuditReputationBeta < node.Reputation.AuditReputationBeta)
require.True(t, corruptedNodeReputation.AuditReputationAlpha >= node.Reputation.AuditReputationAlpha)
// repair should fail, so segment should contain all the original nodes
metainfoService := satellite.Metainfo.Service
pointer, err = metainfoService.Get(ctx, path)
require.NoError(t, err)
remotePieces = pointer.GetRemote().GetRemotePieces()
for _, piece := range remotePieces {
require.Contains(t, originalNodes, piece.NodeId, "there should be no new nodes in pointer")
}
})
}
// TestRemoveIrreparableSegmentFromQueue
// - Upload tests data to 7 nodes
// - Kill nodes so that repair threshold > online nodes > minimum threshold
// - Call checker to add segment to the repair queue
// - Kill nodes so that online nodes < minimum threshold
// - Run the repairer
// - Verify segment is no longer in the repair queue and segment should be the same
func TestRemoveIrreparableSegmentFromQueue(t *testing.T) {
testplanet.Run(t, testplanet.Config{
SatelliteCount: 1,
StorageNodeCount: 10,
UplinkCount: 1,
}, func(t *testing.T, ctx *testcontext.Context, planet *testplanet.Planet) {
// first, upload some remote data
uplinkPeer := planet.Uplinks[0]
satellite := planet.Satellites[0]
// stop discovery service so that we do not get a race condition when we delete nodes from overlay
satellite.Discovery.Service.Discovery.Stop()
satellite.Discovery.Service.Refresh.Stop()
// stop audit to prevent possible interactions i.e. repair timeout problems
satellite.Audit.Worker.Loop.Stop()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Pause()
testData := testrand.Bytes(8 * memory.KiB)
err := uplinkPeer.UploadWithConfig(ctx, satellite, &uplink.RSConfig{
MinThreshold: 3,
RepairThreshold: 5,
SuccessThreshold: 7,
MaxThreshold: 7,
}, "testbucket", "test/path", testData)
require.NoError(t, err)
pointer, _ := getRemoteSegment(t, ctx, satellite)
// kill nodes and track lost pieces
nodesToDQ := make(map[storj.NodeID]bool)
// Kill 3 nodes so that pointer has 4 left (less than repair threshold)
toKill := 3
remotePieces := pointer.GetRemote().GetRemotePieces()
for i, piece := range remotePieces {
if i >= toKill {
continue
}
nodesToDQ[piece.NodeId] = true
}
for nodeID := range nodesToDQ {
disqualifyNode(t, ctx, satellite, nodeID)
}
// trigger checker to add segment to repair queue
satellite.Repair.Checker.Loop.Restart()
satellite.Repair.Checker.Loop.TriggerWait()
satellite.Repair.Checker.Loop.Pause()
// TODO: Verify segment is in queue by making a query to the database
// Kill nodes so that online nodes < minimum threshold
// This will make the segment irreparable
for _, piece := range remotePieces {
disqualifyNode(t, ctx, satellite, piece.NodeId)
}
count, err := satellite.DB.RepairQueue().Count(ctx)
require.NoError(t, err)
require.Equal(t, count, 1)
// Run the repairer
satellite.Repair.Repairer.Loop.Restart()
satellite.Repair.Repairer.Loop.TriggerWait()
satellite.Repair.Repairer.Loop.Pause()
satellite.Repair.Repairer.Limiter.Wait()
count, err = satellite.DB.RepairQueue().Count(ctx)
require.NoError(t, err)
require.Equal(t, count, 0)
})
}
// TestRepairMultipleDisqualified does the following:
// - Uploads test data to 7 nodes
// - Disqualifies 3 nodes
// - Triggers data repair, which repairs the data from the remaining 4 nodes to additional 3 new nodes
// - Shuts down the 4 nodes from which the data was repaired
// - Now we have just the 3 new nodes to which the data was repaired
// - Downloads the data from these 3 nodes (succeeds because 3 nodes are enough for download)
func TestRepairMultipleDisqualified(t *testing.T) {
testplanet.Run(t, testplanet.Config{
SatelliteCount: 1,
StorageNodeCount: 12,
UplinkCount: 1,
}, func(t *testing.T, ctx *testcontext.Context, planet *testplanet.Planet) {
// first, upload some remote data
2019-07-22 20:10:04 +01:00
uplinkPeer := planet.Uplinks[0]
satellite := planet.Satellites[0]
// stop discovery service so that we do not get a race condition when we delete nodes from overlay
satellite.Discovery.Service.Discovery.Stop()
satellite.Discovery.Service.Refresh.Stop()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Pause()
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
testData := testrand.Bytes(8 * memory.KiB)
err := uplinkPeer.UploadWithConfig(ctx, satellite, &uplink.RSConfig{
MinThreshold: 3,
RepairThreshold: 5,
SuccessThreshold: 7,
MaxThreshold: 7,
}, "testbucket", "test/path", testData)
require.NoError(t, err)
// get a remote segment from metainfo
metainfo := satellite.Metainfo.Service
listResponse, _, err := metainfo.List(ctx, "", "", "", true, 0, 0)
require.NoError(t, err)
var path string
var pointer *pb.Pointer
for _, v := range listResponse {
path = v.GetPath()
pointer, err = metainfo.Get(ctx, path)
require.NoError(t, err)
if pointer.GetType() == pb.Pointer_REMOTE {
break
}
}
// calculate how many storagenodes to disqualify
numStorageNodes := len(planet.StorageNodes)
redundancy := pointer.GetRemote().GetRedundancy()
remotePieces := pointer.GetRemote().GetRemotePieces()
minReq := redundancy.GetMinReq()
numPieces := len(remotePieces)
toDisqualify := numPieces - (int(minReq + 1))
// we should have enough storage nodes to repair on
require.True(t, (numStorageNodes-toDisqualify) >= numPieces)
// disqualify nodes and track lost pieces
nodesToDisqualify := make(map[storj.NodeID]bool)
nodesToKeepAlive := make(map[storj.NodeID]bool)
for i, piece := range remotePieces {
if i >= toDisqualify {
nodesToKeepAlive[piece.NodeId] = true
continue
}
nodesToDisqualify[piece.NodeId] = true
}
for _, node := range planet.StorageNodes {
if nodesToDisqualify[node.ID()] {
disqualifyNode(t, ctx, satellite, node.ID())
}
}
err = satellite.Repair.Checker.RefreshReliabilityCache(ctx)
require.NoError(t, err)
satellite.Repair.Checker.Loop.TriggerWait()
satellite.Repair.Repairer.Loop.TriggerWait()
satellite.Repair.Repairer.Limiter.Wait()
// kill nodes kept alive to ensure repair worked
for _, node := range planet.StorageNodes {
if nodesToKeepAlive[node.ID()] {
err = planet.StopPeer(node)
require.NoError(t, err)
_, err = satellite.Overlay.Service.UpdateUptime(ctx, node.ID(), false)
require.NoError(t, err)
}
}
// we should be able to download data without any of the original nodes
newData, err := uplinkPeer.Download(ctx, satellite, "testbucket", "test/path")
require.NoError(t, err)
require.Equal(t, newData, testData)
// updated pointer should not contain any of the disqualified nodes
pointer, err = metainfo.Get(ctx, path)
require.NoError(t, err)
remotePieces = pointer.GetRemote().GetRemotePieces()
for _, piece := range remotePieces {
require.False(t, nodesToDisqualify[piece.NodeId])
2019-04-08 18:33:47 +01:00
}
})
}
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
// TestDataRepairUploadLimits does the following:
// - Uploads test data to nodes
// - Get one segment of that data to check in which nodes its pieces are stored
// - Kills as many nodes as needed which store such segment pieces
// - Triggers data repair
// - Verify that the number of pieces which repaired has uploaded don't overpass
// the established limit (success threshold + % of excess)
func TestDataRepairUploadLimit(t *testing.T) {
const RepairMaxExcessRateOptimalThreshold = 0.05
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
testplanet.Run(t, testplanet.Config{
SatelliteCount: 1,
StorageNodeCount: 13,
UplinkCount: 1,
Reconfigure: testplanet.Reconfigure{
Satellite: func(log *zap.Logger, index int, config *satellite.Config) {
config.Repairer.MaxExcessRateOptimalThreshold = RepairMaxExcessRateOptimalThreshold
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
},
},
}, func(t *testing.T, ctx *testcontext.Context, planet *testplanet.Planet) {
satellite := planet.Satellites[0]
// stop discovery service so that we do not get a race condition when we delete nodes from overlay
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
satellite.Discovery.Service.Discovery.Stop()
satellite.Discovery.Service.Refresh.Stop()
// stop audit to prevent possible interactions i.e. repair timeout problems
satellite.Audit.Worker.Loop.Pause()
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Pause()
const (
repairThreshold = 5
successThreshold = 7
maxThreshold = 9
)
var (
maxRepairUploadThreshold = int(
math.Ceil(
float64(successThreshold) * (1 + RepairMaxExcessRateOptimalThreshold),
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
),
)
ul = planet.Uplinks[0]
testData = testrand.Bytes(8 * memory.KiB)
)
err := ul.UploadWithConfig(ctx, satellite, &uplink.RSConfig{
MinThreshold: 3,
RepairThreshold: repairThreshold,
SuccessThreshold: successThreshold,
MaxThreshold: maxThreshold,
}, "testbucket", "test/path", testData)
require.NoError(t, err)
pointer, path := getRemoteSegment(t, ctx, satellite)
originalPieces := pointer.GetRemote().GetRemotePieces()
require.True(t, len(originalPieces) <= maxThreshold)
{ // Check that there is enough nodes in the network which don't contain
// pieces of the segment for being able to repair the lost pieces
availableNumNodes := len(planet.StorageNodes) - len(originalPieces)
neededNodesForRepair := maxRepairUploadThreshold - repairThreshold
require.Truef(t,
availableNumNodes >= neededNodesForRepair,
"Not enough remaining nodes in the network for repairing the pieces: have= %d, need= %d",
availableNumNodes, neededNodesForRepair,
)
}
originalStorageNodes := make(map[storj.NodeID]struct{})
for _, p := range originalPieces {
originalStorageNodes[p.NodeId] = struct{}{}
}
killedNodes := make(map[storj.NodeID]struct{})
{ // Register nodes of the network which don't have pieces for the segment
// to be injured and ill nodes which have pieces of the segment in order
// to injure it
numNodesToKill := len(originalPieces) - repairThreshold
for _, node := range planet.StorageNodes {
if _, ok := originalStorageNodes[node.ID()]; !ok {
continue
}
if len(killedNodes) < numNodesToKill {
err = planet.StopPeer(node)
require.NoError(t, err)
_, err = satellite.Overlay.Service.UpdateUptime(ctx, node.ID(), false)
require.NoError(t, err)
killedNodes[node.ID()] = struct{}{}
}
}
}
satellite.Repair.Checker.Loop.Restart()
satellite.Repair.Checker.Loop.TriggerWait()
satellite.Repair.Checker.Loop.Pause()
satellite.Repair.Repairer.Loop.Restart()
satellite.Repair.Repairer.Loop.TriggerWait()
satellite.Repair.Repairer.Loop.Pause()
satellite.Repair.Repairer.Limiter.Wait()
// Get the pointer after repair to check the nodes where the pieces are
// stored
pointer, err = satellite.Metainfo.Service.Get(ctx, path)
require.NoError(t, err)
// Check that repair has uploaded missed pieces to an expected number of
// nodes
afterRepairPieces := pointer.GetRemote().GetRemotePieces()
require.Falsef(t,
len(afterRepairPieces) > maxRepairUploadThreshold,
"Repaired pieces cannot be over max repair upload threshold. maxRepairUploadThreshold= %d, have= %d",
maxRepairUploadThreshold, len(afterRepairPieces),
)
require.Falsef(t,
len(afterRepairPieces) < successThreshold,
"Repaired pieces shouldn't be under success threshold. successThreshold= %d, have= %d",
successThreshold, len(afterRepairPieces),
)
// Check that after repair, the segment doesn't have more pieces on the
// killed nodes
for _, p := range afterRepairPieces {
require.NotContains(t, killedNodes, p.NodeId, "there shouldn't be pieces in killed nodes")
}
})
}
func isDisqualified(t *testing.T, ctx *testcontext.Context, satellite *satellite.Peer, nodeID storj.NodeID) bool {
node, err := satellite.Overlay.Service.Get(ctx, nodeID)
require.NoError(t, err)
return node.Disqualified != nil
}
func disqualifyNode(t *testing.T, ctx *testcontext.Context, satellite *satellite.Peer, nodeID storj.NodeID) {
_, err := satellite.DB.OverlayCache().UpdateStats(ctx, &overlay.UpdateRequest{
NodeID: nodeID,
IsUp: true,
AuditSuccess: false,
AuditLambda: 0,
AuditWeight: 1,
AuditDQ: 0.5,
UptimeLambda: 1,
UptimeWeight: 1,
UptimeDQ: 0.5,
})
require.NoError(t, err)
require.True(t, isDisqualified(t, ctx, satellite, nodeID))
}
[V3-1927] Repairer uploads to max threshold instead of success… (#2423) * pkg/datarepair: Add test to check num upload pieces Add a new test for ensuring the number of pieces that the repair process upload when a segment is injured. * satellite/orders: Don't create "put order limits" over total Repair must not create "put order limits" more than the total count. * pkg/datarepair: Update upload repair pieces test Update the test which checks the number of pieces which are uploaded during a repair for using the same excess over the success threshold value than the implementation. * satellites/orders: Limit repair put order for not being total Limit the number of put orders to be used by repair for only uploading pieces to a % excess over the successful threshold. * pkg/datarepair: Change DataRepair test to pass again Make some changes in the DataRepair test to make pass again after the repair upload repaired pieces only until a % excess over success threshold. Also update the steps description of the DataRepair test after it has been changed, to match on what's now, besides to leave it more generic for avoiding having to update it on minimal future refactorings. * satellite: Make repair excess optimal threshold configurable Add a new configuration parameter to the satellite for being able to configure the percentage excess over the optimal threshold, used for determining how many pieces should be repaired/uploaded, rather than having the value hard coded. * repairer: Add configurable param to segments/repairer Add a new parameters to the segment/repairer to calculate the maximum number of excess nodes, based on the optimal threshold, that repaired pieces can be uploaded. This new parameter has been added for not returning more nodes than the number of upload orders for data repair satellite service calculate for repairing pieces. * pkg/storage/ec: Update log message in clien.Repair * satellite: Update configuration lock file
2019-07-11 23:44:47 +01:00
// getRemoteSegment returns a remote pointer its path from satellite.
// nolint:golint
func getRemoteSegment(
t *testing.T, ctx context.Context, satellite *satellite.Peer,
) (_ *pb.Pointer, path string) {
t.Helper()
// get a remote segment from metainfo
metainfo := satellite.Metainfo.Service
listResponse, _, err := metainfo.List(ctx, "", "", "", true, 0, 0)
require.NoError(t, err)
for _, v := range listResponse {
path := v.GetPath()
pointer, err := metainfo.Get(ctx, path)
require.NoError(t, err)
if pointer.GetType() == pb.Pointer_REMOTE {
return pointer, path
}
}
t.Fatal("satellite doesn't have any remote segment")
return nil, ""
}
// nolint:golint
func stopNodeByID(t *testing.T, ctx context.Context, planet *testplanet.Planet, nodeID storj.NodeID) {
t.Helper()
for _, node := range planet.StorageNodes {
if node.ID() == nodeID {
err := planet.StopPeer(node)
require.NoError(t, err)
for _, sat := range planet.Satellites {
_, err = sat.Overlay.Service.UpdateUptime(ctx, node.ID(), false)
require.NoError(t, err)
}
break
}
}
}