captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
// Copyright (C) 2018 Storj Labs, Inc.
|
|
|
|
|
// See LICENSE for copying information.
|
|
|
|
|
|
|
|
|
|
package miniogw
|
|
|
|
|
|
|
|
|
|
import (
|
|
|
|
|
"context"
|
|
|
|
|
"os"
|
|
|
|
|
|
|
|
|
|
"github.com/minio/cli"
|
|
|
|
|
minio "github.com/minio/minio/cmd"
|
|
|
|
|
"github.com/vivint/infectious"
|
|
|
|
|
|
|
|
|
|
"storj.io/storj/pkg/eestream"
|
2018-07-31 15:10:37 +01:00
|
|
|
"storj.io/storj/pkg/miniogw/logging"
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
"storj.io/storj/pkg/overlay"
|
|
|
|
|
"storj.io/storj/pkg/pointerdb"
|
|
|
|
|
"storj.io/storj/pkg/provider"
|
|
|
|
|
ecclient "storj.io/storj/pkg/storage/ec"
|
2018-07-27 13:34:40 +01:00
|
|
|
"storj.io/storj/pkg/storage/objects"
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
segment "storj.io/storj/pkg/storage/segments"
|
2018-07-27 19:13:08 +01:00
|
|
|
"storj.io/storj/pkg/storage/streams"
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
"storj.io/storj/pkg/transport"
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
// RSConfig is a configuration struct that keeps details about default
|
|
|
|
|
// redundancy strategy information
|
|
|
|
|
type RSConfig struct {
|
|
|
|
|
MaxBufferMem int `help:"maximum buffer memory (in bytes) to be allocated for read buffers" default:"0x400000"`
|
|
|
|
|
StripeSize int `help:"the size of each new stripe in bytes" default:"1024"`
|
|
|
|
|
MinThreshold int `help:"the minimum pieces required to recover a segment. k." default:"20"`
|
|
|
|
|
RepairThreshold int `help:"the minimum safe pieces before a repair is triggered. m." default:"30"`
|
|
|
|
|
SuccessThreshold int `help:"the desired total pieces for a segment. o." default:"40"`
|
|
|
|
|
MaxThreshold int `help:"the largest amount of pieces to encode to. n." default:"50"`
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// MinioConfig is a configuration struct that keeps details about starting
|
|
|
|
|
// Minio
|
|
|
|
|
type MinioConfig struct {
|
|
|
|
|
AccessKey string `help:"Minio Access Key to use" default:"insecure-dev-access-key"`
|
|
|
|
|
SecretKey string `help:"Minio Secret Key to use" default:"insecure-dev-secret-key"`
|
2018-07-26 15:21:35 +01:00
|
|
|
MinioDir string `help:"Minio generic server config path" default:"$CONFDIR/miniogw"`
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// ClientConfig is a configuration struct for the miniogw that controls how
|
|
|
|
|
// the miniogw figures out how to talk to the rest of the network.
|
|
|
|
|
type ClientConfig struct {
|
|
|
|
|
// TODO(jt): these should probably be the same
|
|
|
|
|
OverlayAddr string `help:"Address to contact overlay server through"`
|
|
|
|
|
PointerDBAddr string `help:"Address to contact pointerdb server through"`
|
2018-08-02 20:30:57 +01:00
|
|
|
|
2018-08-03 04:37:20 +01:00
|
|
|
APIKey string `help:"API Key (TODO: this needs to change to macaroons somehow)"`
|
|
|
|
|
MaxInlineSize int `help:"max inline segment size in bytes" default:"4096"`
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Config is a general miniogw configuration struct. This should be everything
|
|
|
|
|
// one needs to start a minio gateway.
|
|
|
|
|
type Config struct {
|
|
|
|
|
provider.IdentityConfig
|
|
|
|
|
MinioConfig
|
|
|
|
|
ClientConfig
|
|
|
|
|
RSConfig
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Run starts a Minio Gateway given proper config
|
|
|
|
|
func (c Config) Run(ctx context.Context) (err error) {
|
|
|
|
|
defer mon.Task()(&ctx)(&err)
|
|
|
|
|
|
2018-08-13 09:39:45 +01:00
|
|
|
identity, err := c.Load()
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
if err != nil {
|
|
|
|
|
return err
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
err = minio.RegisterGatewayCommand(cli.Command{
|
|
|
|
|
Name: "storj",
|
|
|
|
|
Usage: "Storj",
|
|
|
|
|
Action: func(cliCtx *cli.Context) error {
|
|
|
|
|
return c.action(ctx, cliCtx, identity)
|
|
|
|
|
},
|
|
|
|
|
HideHelpCommand: true,
|
|
|
|
|
})
|
|
|
|
|
if err != nil {
|
|
|
|
|
return err
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// TODO(jt): Surely there is a better way. This is so upsetting
|
|
|
|
|
err = os.Setenv("MINIO_ACCESS_KEY", c.AccessKey)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return err
|
|
|
|
|
}
|
|
|
|
|
err = os.Setenv("MINIO_SECRET_KEY", c.SecretKey)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return err
|
|
|
|
|
}
|
|
|
|
|
minio.Main([]string{"storj", "gateway", "storj",
|
|
|
|
|
"--address", c.Address, "--config-dir", c.MinioDir})
|
|
|
|
|
return Error.New("unexpected minio exit")
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (c Config) action(ctx context.Context, cliCtx *cli.Context,
|
2018-08-03 04:37:20 +01:00
|
|
|
identity *provider.FullIdentity) (err error) {
|
|
|
|
|
defer mon.Task()(&ctx)(&err)
|
|
|
|
|
|
|
|
|
|
gw, err := c.NewGateway(ctx, identity)
|
|
|
|
|
if err != nil {
|
|
|
|
|
return err
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
minio.StartGateway(cliCtx, logging.Gateway(gw))
|
|
|
|
|
return Error.New("unexpected minio exit")
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (c Config) NewGateway(ctx context.Context,
|
|
|
|
|
identity *provider.FullIdentity) (gw minio.Gateway, err error) {
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
defer mon.Task()(&ctx)(&err)
|
|
|
|
|
|
|
|
|
|
// TODO(jt): the transport client should use tls and should use the identity
|
|
|
|
|
// defined in this function.
|
|
|
|
|
t := transport.NewClient()
|
|
|
|
|
|
|
|
|
|
// TODO(jt): overlay.NewClient should dial the overlay server with the
|
|
|
|
|
// transport client. probably should use the same connection as the
|
|
|
|
|
// pointerdb client
|
2018-08-03 04:37:20 +01:00
|
|
|
var oc overlay.Client
|
|
|
|
|
oc, err = overlay.NewOverlayClient(c.OverlayAddr)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
if err != nil {
|
2018-08-03 04:37:20 +01:00
|
|
|
return nil, err
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
|
2018-08-03 04:37:20 +01:00
|
|
|
// TODO(jt): remove this!
|
2018-08-11 00:19:19 +01:00
|
|
|
oc = GlobalMockOverlay
|
2018-08-03 04:37:20 +01:00
|
|
|
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
// TODO(jt): pointerdb.NewClient should dial the pointerdb server with the
|
|
|
|
|
// transport client. probably should use the same connection as the
|
|
|
|
|
// overlay client
|
2018-08-02 20:30:57 +01:00
|
|
|
pdb, err := pointerdb.NewClient(c.PointerDBAddr, []byte(c.APIKey))
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
if err != nil {
|
2018-08-03 04:37:20 +01:00
|
|
|
return nil, err
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ec := ecclient.NewClient(t, c.MaxBufferMem)
|
|
|
|
|
fc, err := infectious.NewFEC(c.MinThreshold, c.MaxThreshold)
|
|
|
|
|
if err != nil {
|
2018-08-03 04:37:20 +01:00
|
|
|
return nil, err
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
rs, err := eestream.NewRedundancyStrategy(
|
|
|
|
|
eestream.NewRSScheme(fc, c.StripeSize/c.MaxThreshold),
|
|
|
|
|
c.RepairThreshold, c.SuccessThreshold)
|
|
|
|
|
if err != nil {
|
2018-08-03 04:37:20 +01:00
|
|
|
return nil, err
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
|
2018-08-03 04:37:20 +01:00
|
|
|
segments := segment.NewSegmentStore(oc, ec, pdb, rs, c.MaxInlineSize)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
|
2018-07-27 19:13:08 +01:00
|
|
|
// TODO(jt): wrap segments and turn segments into streams actually
|
|
|
|
|
// TODO: passthrough is bad
|
|
|
|
|
stream := streams.NewPassthrough(segments)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
|
2018-08-03 04:37:20 +01:00
|
|
|
return NewStorjGateway(objects.NewStore(stream)), nil
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
