satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// Copyright (C) 2023 Storj Labs, Inc.
|
|
|
|
// See LICENSE for copying information.
|
|
|
|
|
|
|
|
package repair
|
|
|
|
|
|
|
|
import (
|
|
|
|
"storj.io/common/storj"
|
|
|
|
"storj.io/common/storj/location"
|
|
|
|
"storj.io/storj/satellite/metabase"
|
|
|
|
"storj.io/storj/satellite/nodeselection"
|
|
|
|
)
|
|
|
|
|
|
|
|
// PiecesCheckResult contains all necessary aggregate information about the state of pieces in a
|
|
|
|
// segment. The node that should be holding each piece is evaluated to see if it is online and
|
|
|
|
// whether it is in a clumped IP network, in an excluded country, or out of placement for the
|
|
|
|
// segment.
|
|
|
|
type PiecesCheckResult struct {
|
|
|
|
// ExcludeNodeIDs is a list of all node IDs holding pieces of this segment.
|
|
|
|
ExcludeNodeIDs []storj.NodeID
|
|
|
|
|
|
|
|
// Missing is a set of Piece Numbers which are to be considered as lost and irretrievable.
|
|
|
|
// (They reside on offline/disqualified/unknown nodes.)
|
2023-10-06 10:53:48 +01:00
|
|
|
Missing IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// Retrievable contains all Piece Numbers that are retrievable; that is, all piece numbers
|
|
|
|
// from the segment that are NOT in Missing.
|
2023-10-06 10:53:48 +01:00
|
|
|
Retrievable IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
|
|
|
// Suspended is a set of Piece Numbers which reside on nodes which are suspended.
|
2023-10-06 10:53:48 +01:00
|
|
|
Suspended IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// Clumped is a set of Piece Numbers which are to be considered unhealthy because of IP
|
|
|
|
// clumping. (If DoDeclumping is disabled, this set will be empty.)
|
2023-10-06 10:53:48 +01:00
|
|
|
Clumped IntSet
|
2023-07-25 18:48:36 +01:00
|
|
|
// Exiting is a set of Piece Numbers which are considered unhealthy because the node on
|
|
|
|
// which they reside has initiated graceful exit.
|
2023-10-06 10:53:48 +01:00
|
|
|
Exiting IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// OutOfPlacement is a set of Piece Numbers which are unhealthy because of placement rules.
|
|
|
|
// (If DoPlacementCheck is disabled, this set will be empty.)
|
2023-10-06 10:53:48 +01:00
|
|
|
OutOfPlacement IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// InExcludedCountry is a set of Piece Numbers which are unhealthy because they are in
|
|
|
|
// Excluded countries.
|
2023-10-06 10:53:48 +01:00
|
|
|
InExcludedCountry IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
|
|
|
// ForcingRepair is the set of pieces which force a repair operation for this segment (that
|
|
|
|
// includes, currently, only pieces in OutOfPlacement).
|
2023-10-06 10:53:48 +01:00
|
|
|
ForcingRepair IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// Unhealthy contains all Piece Numbers which are in Missing OR Suspended OR Clumped OR
|
2023-07-25 18:48:36 +01:00
|
|
|
// Exiting OR OutOfPlacement OR InExcludedCountry.
|
2023-10-06 10:53:48 +01:00
|
|
|
Unhealthy IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// UnhealthyRetrievable is the set of pieces that are "unhealthy-but-retrievable". That is,
|
|
|
|
// pieces that are in Unhealthy AND Retrievable.
|
2023-10-06 10:53:48 +01:00
|
|
|
UnhealthyRetrievable IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// Healthy contains all Piece Numbers from the segment which are not in Unhealthy.
|
|
|
|
// (Equivalently: all Piece Numbers from the segment which are NOT in Missing OR
|
2023-07-25 18:48:36 +01:00
|
|
|
// Suspended OR Clumped OR Exiting OR OutOfPlacement OR InExcludedCountry).
|
2023-10-06 10:53:48 +01:00
|
|
|
Healthy IntSet
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
// ClassifySegmentPieces classifies the pieces of a segment into the categories
|
|
|
|
// represented by a PiecesCheckResult. Pieces may be put into multiple
|
|
|
|
// categories.
|
2023-10-06 10:14:35 +01:00
|
|
|
func ClassifySegmentPieces(pieces metabase.Pieces, nodes []nodeselection.SelectedNode, excludedCountryCodes map[location.CountryCode]struct{},
|
|
|
|
doPlacementCheck, doDeclumping bool, filter nodeselection.NodeFilter, excludeNodeIDs []storj.NodeID) (result PiecesCheckResult) {
|
|
|
|
result.ExcludeNodeIDs = excludeNodeIDs
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
2023-10-06 10:53:48 +01:00
|
|
|
maxPieceNum := 0
|
|
|
|
for _, piece := range pieces {
|
|
|
|
if int(piece.Number) > maxPieceNum {
|
|
|
|
maxPieceNum = int(piece.Number)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
maxPieceNum++
|
|
|
|
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
// check excluded countries and remove online nodes from missing pieces
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Missing = NewIntSet(maxPieceNum)
|
|
|
|
result.Suspended = NewIntSet(maxPieceNum)
|
|
|
|
result.Exiting = NewIntSet(maxPieceNum)
|
|
|
|
result.Retrievable = NewIntSet(maxPieceNum)
|
|
|
|
result.InExcludedCountry = NewIntSet(maxPieceNum)
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
for index, nodeRecord := range nodes {
|
|
|
|
pieceNum := pieces[index].Number
|
|
|
|
|
|
|
|
if !nodeRecord.ID.IsZero() && pieces[index].StorageNode != nodeRecord.ID {
|
|
|
|
panic("wrong order")
|
|
|
|
}
|
|
|
|
|
|
|
|
if nodeRecord.ID.IsZero() || !nodeRecord.Online {
|
|
|
|
// node ID was not found, or the node is disqualified or exited,
|
|
|
|
// or it is offline
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Missing.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
} else {
|
|
|
|
// node is expected to be online and receiving requests.
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Retrievable.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
if nodeRecord.Suspended {
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Suspended.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
2023-07-25 18:48:36 +01:00
|
|
|
if nodeRecord.Exiting {
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Exiting.Include(int(pieceNum))
|
2023-07-25 18:48:36 +01:00
|
|
|
}
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
|
|
|
if _, excluded := excludedCountryCodes[nodeRecord.CountryCode]; excluded {
|
2023-10-06 10:53:48 +01:00
|
|
|
result.InExcludedCountry.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if doDeclumping && nodeselection.GetAnnotation(filter, nodeselection.AutoExcludeSubnet) != nodeselection.AutoExcludeSubnetOFF {
|
|
|
|
// if multiple pieces are on the same last_net, keep only the first one. The rest are
|
|
|
|
// to be considered retrievable but unhealthy.
|
|
|
|
|
|
|
|
lastNets := make(map[string]struct{}, len(pieces))
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Clumped = NewIntSet(maxPieceNum)
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
|
|
|
collectClumpedPieces := func(onlineness bool) {
|
|
|
|
for index, nodeRecord := range nodes {
|
|
|
|
if nodeRecord.Online != onlineness {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
if nodeRecord.LastNet == "" {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
pieceNum := pieces[index].Number
|
|
|
|
_, ok := lastNets[nodeRecord.LastNet]
|
|
|
|
if ok {
|
|
|
|
// this LastNet was already seen
|
2023-10-06 10:53:48 +01:00
|
|
|
result.Clumped.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
} else {
|
|
|
|
// add to the list of seen LastNets
|
|
|
|
lastNets[nodeRecord.LastNet] = struct{}{}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// go over online nodes first, so that if we have to remove clumped pieces, we prefer
|
|
|
|
// to remove offline ones over online ones.
|
|
|
|
collectClumpedPieces(true)
|
|
|
|
collectClumpedPieces(false)
|
|
|
|
}
|
|
|
|
|
|
|
|
if doPlacementCheck {
|
|
|
|
// mark all pieces that are out of placement.
|
|
|
|
|
2023-10-06 10:53:48 +01:00
|
|
|
result.OutOfPlacement = NewIntSet(maxPieceNum)
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
for index, nodeRecord := range nodes {
|
|
|
|
if nodeRecord.ID.IsZero() {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
if filter.Match(&nodeRecord) {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
pieceNum := pieces[index].Number
|
2023-10-06 10:53:48 +01:00
|
|
|
result.OutOfPlacement.Include(int(pieceNum))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// ForcingRepair = OutOfPlacement only, for now
|
2023-10-06 10:53:48 +01:00
|
|
|
result.ForcingRepair = copyIntSet(NewIntSet(maxPieceNum),
|
|
|
|
result.OutOfPlacement,
|
|
|
|
)
|
|
|
|
|
|
|
|
// Unhealthy = Missing OR Suspended OR Clumped OR Exiting OR OutOfPlacement OR InExcludedCountry
|
|
|
|
result.Unhealthy = copyIntSet(NewIntSet(maxPieceNum),
|
|
|
|
result.Missing,
|
|
|
|
result.Suspended,
|
|
|
|
result.Clumped,
|
|
|
|
result.Exiting,
|
|
|
|
result.OutOfPlacement,
|
|
|
|
result.InExcludedCountry,
|
|
|
|
)
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
|
|
|
|
// UnhealthyRetrievable = Unhealthy AND Retrievable
|
|
|
|
// Healthy = NOT Unhealthy
|
2023-10-06 10:53:48 +01:00
|
|
|
result.UnhealthyRetrievable = NewIntSet(maxPieceNum)
|
|
|
|
result.Healthy = NewIntSet(maxPieceNum)
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
for _, piece := range pieces {
|
2023-10-06 10:53:48 +01:00
|
|
|
if !result.Unhealthy.Contains(int(piece.Number)) {
|
|
|
|
result.Healthy.Include(int(piece.Number))
|
|
|
|
} else if result.Retrievable.Contains(int(piece.Number)) {
|
|
|
|
result.UnhealthyRetrievable.Include(int(piece.Number))
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
}
|
|
|
|
}
|
2023-10-06 10:53:48 +01:00
|
|
|
|
satellite/repair: unify repair logic
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
2023-09-11 05:07:39 +01:00
|
|
|
return result
|
|
|
|
}
|
2023-10-06 10:53:48 +01:00
|
|
|
|
|
|
|
func copyIntSet(destination IntSet, sources ...IntSet) IntSet {
|
|
|
|
for element := 0; element < destination.Cap(); element++ {
|
|
|
|
for _, sources := range sources {
|
|
|
|
if sources.Contains(element) {
|
|
|
|
destination.Include(element)
|
|
|
|
break
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return destination
|
|
|
|
}
|
|
|
|
|
|
|
|
// IntSet set of pieces.
|
|
|
|
type IntSet struct {
|
|
|
|
bits []bool
|
|
|
|
size int
|
|
|
|
}
|
|
|
|
|
|
|
|
// NewIntSet creates new int set.
|
|
|
|
func NewIntSet(n int) IntSet {
|
|
|
|
return IntSet{
|
|
|
|
bits: make([]bool, n),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Contains returns true if set includes int value.
|
|
|
|
func (i IntSet) Contains(value int) bool {
|
|
|
|
if value >= cap(i.bits) {
|
|
|
|
return false
|
|
|
|
}
|
|
|
|
return i.bits[value]
|
|
|
|
}
|
|
|
|
|
|
|
|
// Include includes int value into set.
|
|
|
|
// Ignores values above set size.
|
|
|
|
func (i *IntSet) Include(value int) {
|
|
|
|
i.bits[value] = true
|
|
|
|
i.size++
|
|
|
|
}
|
|
|
|
|
|
|
|
// Remove removes int value from set.
|
|
|
|
func (i *IntSet) Remove(value int) {
|
|
|
|
i.bits[value] = true
|
|
|
|
i.size--
|
|
|
|
}
|
|
|
|
|
|
|
|
// Size returns size of set.
|
|
|
|
func (i IntSet) Size() int {
|
|
|
|
return i.size
|
|
|
|
}
|
|
|
|
|
|
|
|
// Cap returns set capacity.
|
|
|
|
func (i IntSet) Cap() int {
|
|
|
|
return cap(i.bits)
|
|
|
|
}
|