2019-01-24 20:15:10 +00:00
|
|
|
// Copyright (C) 2019 Storj Labs, Inc.
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
// See LICENSE for copying information.
|
|
|
|
|
|
|
|
package cfgstruct
|
|
|
|
|
|
|
|
import (
|
|
|
|
"fmt"
|
|
|
|
"os"
|
2018-12-11 18:41:19 +00:00
|
|
|
"path/filepath"
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
"reflect"
|
|
|
|
"strconv"
|
|
|
|
"strings"
|
|
|
|
"time"
|
2019-01-07 11:06:10 +00:00
|
|
|
|
2019-03-12 12:51:06 +00:00
|
|
|
"github.com/spf13/cobra"
|
2019-01-07 11:06:10 +00:00
|
|
|
"github.com/spf13/pflag"
|
2019-03-12 12:51:06 +00:00
|
|
|
"go.uber.org/zap"
|
2019-01-14 21:19:15 +00:00
|
|
|
|
|
|
|
"storj.io/storj/internal/memory"
|
2019-04-19 19:17:30 +01:00
|
|
|
"storj.io/storj/internal/version"
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
)
|
|
|
|
|
2018-07-26 15:21:35 +01:00
|
|
|
// BindOpt is an option for the Bind method
|
2019-04-19 19:17:30 +01:00
|
|
|
type BindOpt struct {
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
isDev *bool
|
|
|
|
isSetup *bool
|
|
|
|
varfn func(vars map[string]confVar)
|
2019-04-19 19:17:30 +01:00
|
|
|
}
|
2018-07-26 15:21:35 +01:00
|
|
|
|
2018-12-11 18:41:19 +00:00
|
|
|
// ConfDir sets variables for default options called $CONFDIR and $CONFNAME.
|
2019-01-22 14:34:40 +00:00
|
|
|
func ConfDir(path string) BindOpt {
|
|
|
|
val := filepath.Clean(os.ExpandEnv(path))
|
2019-04-19 19:17:30 +01:00
|
|
|
return BindOpt{varfn: func(vars map[string]confVar) {
|
2018-12-11 18:41:19 +00:00
|
|
|
vars["CONFDIR"] = confVar{val: val, nested: false}
|
2019-04-19 19:17:30 +01:00
|
|
|
}}
|
|
|
|
}
|
|
|
|
|
|
|
|
// IdentityDir sets a variable for the default option called $IDENTITYDIR.
|
|
|
|
func IdentityDir(path string) BindOpt {
|
|
|
|
val := filepath.Clean(os.ExpandEnv(path))
|
|
|
|
return BindOpt{varfn: func(vars map[string]confVar) {
|
|
|
|
vars["IDENTITYDIR"] = confVar{val: val, nested: false}
|
|
|
|
}}
|
|
|
|
}
|
|
|
|
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
// SetupMode issues the bind in a mode where it does not ignore fields with the
|
|
|
|
// `setup:"true"` tag.
|
|
|
|
func SetupMode() BindOpt {
|
|
|
|
setup := true
|
|
|
|
return BindOpt{isSetup: &setup}
|
|
|
|
}
|
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
// UseDevDefaults forces the bind call to use development defaults unless
|
|
|
|
// UseReleaseDefaults is provided as a subsequent option.
|
|
|
|
// Without either, Bind will default to determining which defaults to use
|
|
|
|
// based on version.Build.Release
|
|
|
|
func UseDevDefaults() BindOpt {
|
|
|
|
dev := true
|
|
|
|
return BindOpt{isDev: &dev}
|
|
|
|
}
|
|
|
|
|
|
|
|
// UseReleaseDefaults forces the bind call to use release defaults unless
|
|
|
|
// UseDevDefaults is provided as a subsequent option.
|
|
|
|
// Without either, Bind will default to determining which defaults to use
|
|
|
|
// based on version.Build.Release
|
|
|
|
func UseReleaseDefaults() BindOpt {
|
|
|
|
dev := false
|
|
|
|
return BindOpt{isDev: &dev}
|
2018-12-11 18:41:19 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
type confVar struct {
|
|
|
|
val string
|
|
|
|
nested bool
|
|
|
|
}
|
|
|
|
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
// Bind sets flags on a FlagSet that match the configuration struct
|
|
|
|
// 'config'. This works by traversing the config struct using the 'reflect'
|
2019-01-07 11:06:10 +00:00
|
|
|
// package.
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
func Bind(flags FlagSet, config interface{}, opts ...BindOpt) {
|
|
|
|
bind(flags, config, opts...)
|
2019-01-07 11:06:10 +00:00
|
|
|
}
|
|
|
|
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
func bind(flags FlagSet, config interface{}, opts ...BindOpt) {
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
ptrtype := reflect.TypeOf(config)
|
|
|
|
if ptrtype.Kind() != reflect.Ptr {
|
2019-01-07 11:06:10 +00:00
|
|
|
panic(fmt.Sprintf("invalid config type: %#v. Expecting pointer to struct.", config))
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
2019-04-19 19:17:30 +01:00
|
|
|
isDev := !version.Build.Release
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
setupCommand := false
|
2018-12-11 18:41:19 +00:00
|
|
|
vars := map[string]confVar{}
|
2018-07-26 15:21:35 +01:00
|
|
|
for _, opt := range opts {
|
2019-04-19 19:17:30 +01:00
|
|
|
if opt.varfn != nil {
|
|
|
|
opt.varfn(vars)
|
|
|
|
}
|
|
|
|
if opt.isDev != nil {
|
|
|
|
isDev = *opt.isDev
|
|
|
|
}
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
if opt.isSetup != nil {
|
|
|
|
setupCommand = *opt.isSetup
|
|
|
|
}
|
2018-07-26 15:21:35 +01:00
|
|
|
}
|
2019-03-12 12:51:06 +00:00
|
|
|
|
|
|
|
bindConfig(flags, "", reflect.ValueOf(config).Elem(), vars, setupCommand, false, isDev)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
|
2019-03-12 12:51:06 +00:00
|
|
|
func bindConfig(flags FlagSet, prefix string, val reflect.Value, vars map[string]confVar, setupCommand, setupStruct bool, isDev bool) {
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
if val.Kind() != reflect.Struct {
|
2019-01-07 11:06:10 +00:00
|
|
|
panic(fmt.Sprintf("invalid config type: %#v. Expecting struct.", val.Interface()))
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
typ := val.Type()
|
2018-12-11 18:41:19 +00:00
|
|
|
resolvedVars := make(map[string]string, len(vars))
|
|
|
|
{
|
Command line flags features and cleanup (#2068)
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
2019-05-29 18:56:22 +01:00
|
|
|
structpath := strings.Replace(prefix, ".", string(filepath.Separator), -1)
|
2018-12-11 18:41:19 +00:00
|
|
|
for k, v := range vars {
|
|
|
|
if !v.nested {
|
|
|
|
resolvedVars[k] = v.val
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
resolvedVars[k] = filepath.Join(v.val, structpath)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
for i := 0; i < typ.NumField(); i++ {
|
|
|
|
field := typ.Field(i)
|
|
|
|
fieldval := val.Field(i)
|
2019-03-22 09:01:49 +00:00
|
|
|
flagname := hyphenate(snakeCase(field.Name))
|
|
|
|
|
|
|
|
if field.Tag.Get("noprefix") != "true" {
|
|
|
|
flagname = prefix + flagname
|
|
|
|
}
|
|
|
|
|
2019-02-05 17:31:53 +00:00
|
|
|
if field.Tag.Get("internal") == "true" {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
2019-01-07 11:06:10 +00:00
|
|
|
onlyForSetup := (field.Tag.Get("setup") == "true") || setupStruct
|
|
|
|
// ignore setup params for non setup commands
|
|
|
|
if !setupCommand && onlyForSetup {
|
|
|
|
continue
|
|
|
|
}
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
|
|
|
|
switch field.Type.Kind() {
|
|
|
|
case reflect.Struct:
|
|
|
|
if field.Anonymous {
|
2019-03-12 12:51:06 +00:00
|
|
|
bindConfig(flags, prefix, fieldval, vars, setupCommand, onlyForSetup, isDev)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
} else {
|
2019-03-12 12:51:06 +00:00
|
|
|
bindConfig(flags, flagname+".", fieldval, vars, setupCommand, onlyForSetup, isDev)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
2019-05-14 19:15:12 +01:00
|
|
|
case reflect.Array:
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
digits := len(fmt.Sprint(fieldval.Len()))
|
|
|
|
for j := 0; j < fieldval.Len(); j++ {
|
|
|
|
padding := strings.Repeat("0", digits-len(fmt.Sprint(j)))
|
2019-03-12 12:51:06 +00:00
|
|
|
bindConfig(flags, fmt.Sprintf("%s.%s%d.", flagname, padding, j), fieldval.Index(j), vars, setupCommand, onlyForSetup, isDev)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
default:
|
2019-01-07 11:06:10 +00:00
|
|
|
help := field.Tag.Get("help")
|
2019-04-19 19:17:30 +01:00
|
|
|
var def string
|
2019-03-12 12:51:06 +00:00
|
|
|
if isDev {
|
2019-04-19 19:17:30 +01:00
|
|
|
def = getDefault(field.Tag, "devDefault", "releaseDefault", "default", flagname)
|
|
|
|
} else {
|
|
|
|
def = getDefault(field.Tag, "releaseDefault", "devDefault", "default", flagname)
|
2019-03-12 12:51:06 +00:00
|
|
|
}
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
fieldaddr := fieldval.Addr().Interface()
|
|
|
|
check := func(err error) {
|
|
|
|
if err != nil {
|
|
|
|
panic(fmt.Sprintf("invalid default value for %s: %#v", flagname, def))
|
|
|
|
}
|
|
|
|
}
|
|
|
|
switch field.Type {
|
2019-01-14 21:19:15 +00:00
|
|
|
case reflect.TypeOf(memory.Size(0)):
|
|
|
|
check(fieldaddr.(*memory.Size).Set(def))
|
|
|
|
flags.Var(fieldaddr.(*memory.Size), flagname, help)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
case reflect.TypeOf(int(0)):
|
|
|
|
val, err := strconv.ParseInt(def, 0, strconv.IntSize)
|
|
|
|
check(err)
|
|
|
|
flags.IntVar(fieldaddr.(*int), flagname, int(val), help)
|
|
|
|
case reflect.TypeOf(int64(0)):
|
|
|
|
val, err := strconv.ParseInt(def, 0, 64)
|
|
|
|
check(err)
|
|
|
|
flags.Int64Var(fieldaddr.(*int64), flagname, val, help)
|
|
|
|
case reflect.TypeOf(uint(0)):
|
|
|
|
val, err := strconv.ParseUint(def, 0, strconv.IntSize)
|
|
|
|
check(err)
|
|
|
|
flags.UintVar(fieldaddr.(*uint), flagname, uint(val), help)
|
|
|
|
case reflect.TypeOf(uint64(0)):
|
|
|
|
val, err := strconv.ParseUint(def, 0, 64)
|
|
|
|
check(err)
|
|
|
|
flags.Uint64Var(fieldaddr.(*uint64), flagname, val, help)
|
|
|
|
case reflect.TypeOf(time.Duration(0)):
|
|
|
|
val, err := time.ParseDuration(def)
|
|
|
|
check(err)
|
|
|
|
flags.DurationVar(fieldaddr.(*time.Duration), flagname, val, help)
|
|
|
|
case reflect.TypeOf(float64(0)):
|
|
|
|
val, err := strconv.ParseFloat(def, 64)
|
|
|
|
check(err)
|
|
|
|
flags.Float64Var(fieldaddr.(*float64), flagname, val, help)
|
|
|
|
case reflect.TypeOf(string("")):
|
2018-12-11 18:41:19 +00:00
|
|
|
flags.StringVar(
|
|
|
|
fieldaddr.(*string), flagname, expand(resolvedVars, def), help)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
case reflect.TypeOf(bool(false)):
|
|
|
|
val, err := strconv.ParseBool(def)
|
|
|
|
check(err)
|
|
|
|
flags.BoolVar(fieldaddr.(*bool), flagname, val, help)
|
2019-05-14 19:15:12 +01:00
|
|
|
case reflect.TypeOf([]string(nil)):
|
|
|
|
flags.StringArrayVar(fieldaddr.(*[]string), flagname, nil, help)
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
default:
|
|
|
|
panic(fmt.Sprintf("invalid field type: %s", field.Type.String()))
|
|
|
|
}
|
2019-01-07 11:06:10 +00:00
|
|
|
if onlyForSetup {
|
2019-01-15 13:55:33 +00:00
|
|
|
setBoolAnnotation(flags, flagname, "setup")
|
|
|
|
}
|
|
|
|
if field.Tag.Get("user") == "true" {
|
|
|
|
setBoolAnnotation(flags, flagname, "user")
|
2019-01-07 11:06:10 +00:00
|
|
|
}
|
2019-06-19 15:27:44 +01:00
|
|
|
if field.Tag.Get("hidden") == "true" {
|
|
|
|
err := flags.MarkHidden(flagname)
|
|
|
|
check(err)
|
|
|
|
}
|
captplanet (#159)
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
2018-07-24 17:08:28 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2018-07-26 15:21:35 +01:00
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
func getDefault(tag reflect.StructTag, preferred, opposite, fallback, flagname string) string {
|
|
|
|
if val, ok := tag.Lookup(preferred); ok {
|
|
|
|
if _, oppositeExists := tag.Lookup(opposite); !oppositeExists {
|
|
|
|
panic(fmt.Sprintf("%q defined but %q missing for %v", preferred, opposite, flagname))
|
|
|
|
}
|
|
|
|
if _, fallbackExists := tag.Lookup(fallback); fallbackExists {
|
|
|
|
panic(fmt.Sprintf("%q defined along with %q fallback for %v", preferred, fallback, flagname))
|
|
|
|
}
|
|
|
|
return val
|
|
|
|
}
|
|
|
|
if _, oppositeExists := tag.Lookup(opposite); oppositeExists {
|
|
|
|
panic(fmt.Sprintf("%q missing but %q defined for %v", preferred, opposite, flagname))
|
|
|
|
}
|
|
|
|
return tag.Get(fallback)
|
|
|
|
}
|
|
|
|
|
2019-01-15 13:55:33 +00:00
|
|
|
func setBoolAnnotation(flagset interface{}, name, key string) {
|
2019-01-07 11:06:10 +00:00
|
|
|
flags, ok := flagset.(*pflag.FlagSet)
|
|
|
|
if !ok {
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
2019-01-15 13:55:33 +00:00
|
|
|
err := flags.SetAnnotation(name, key, []string{"true"})
|
2019-01-07 11:06:10 +00:00
|
|
|
if err != nil {
|
2019-01-15 13:55:33 +00:00
|
|
|
panic(fmt.Sprintf("unable to set %s annotation for %s: %v", key, name, err))
|
2019-01-07 11:06:10 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-07-26 15:21:35 +01:00
|
|
|
func expand(vars map[string]string, val string) string {
|
|
|
|
return os.Expand(val, func(key string) string { return vars[key] })
|
|
|
|
}
|
2018-12-14 21:14:59 +00:00
|
|
|
|
|
|
|
// FindConfigDirParam returns '--config-dir' param from os.Args (if exists)
|
|
|
|
func FindConfigDirParam() string {
|
2019-01-22 12:35:48 +00:00
|
|
|
return FindFlagEarly("config-dir")
|
|
|
|
}
|
|
|
|
|
2019-01-22 14:34:40 +00:00
|
|
|
// FindIdentityDirParam returns '--identity-dir' param from os.Args (if exists)
|
|
|
|
func FindIdentityDirParam() string {
|
2019-01-22 12:35:48 +00:00
|
|
|
return FindFlagEarly("identity-dir")
|
|
|
|
}
|
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
// FindDefaultsParam returns '--defaults' param from os.Args (if it exists)
|
|
|
|
func FindDefaultsParam() string {
|
|
|
|
return FindFlagEarly("defaults")
|
|
|
|
}
|
|
|
|
|
2019-01-22 12:35:48 +00:00
|
|
|
// FindFlagEarly retrieves the value of a flag before `flag.Parse` has been called
|
|
|
|
func FindFlagEarly(flagName string) string {
|
2018-12-14 21:14:59 +00:00
|
|
|
// workaround to have early access to 'dir' param
|
|
|
|
for i, arg := range os.Args {
|
2019-01-22 12:35:48 +00:00
|
|
|
if strings.HasPrefix(arg, fmt.Sprintf("--%s=", flagName)) {
|
|
|
|
return strings.TrimPrefix(arg, fmt.Sprintf("--%s=", flagName))
|
|
|
|
} else if arg == fmt.Sprintf("--%s", flagName) && i < len(os.Args)-1 {
|
2018-12-14 21:14:59 +00:00
|
|
|
return os.Args[i+1]
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ""
|
|
|
|
}
|
2019-03-12 12:51:06 +00:00
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
// SetupFlag sets up flags that are needed before `flag.Parse` has been called
|
2019-03-12 12:51:06 +00:00
|
|
|
func SetupFlag(log *zap.Logger, cmd *cobra.Command, dest *string, name, value, usage string) {
|
|
|
|
if foundValue := FindFlagEarly(name); foundValue != "" {
|
|
|
|
value = foundValue
|
|
|
|
}
|
|
|
|
cmd.PersistentFlags().StringVar(dest, name, value, usage)
|
|
|
|
if cmd.PersistentFlags().SetAnnotation(name, "setup", []string{"true"}) != nil {
|
|
|
|
log.Sugar().Errorf("Failed to set 'setup' annotation for '%s'", name)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-05-31 23:47:48 +01:00
|
|
|
// DefaultsType returns the type of defaults (release/dev) this binary should use
|
|
|
|
func DefaultsType() string {
|
|
|
|
// define a flag so that the flag parsing system will be happy.
|
|
|
|
defaults := strings.ToLower(FindDefaultsParam())
|
|
|
|
if defaults != "" {
|
|
|
|
return defaults
|
|
|
|
}
|
|
|
|
if version.Build.Release {
|
|
|
|
return "release"
|
|
|
|
}
|
|
|
|
return "dev"
|
|
|
|
}
|
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
// DefaultsFlag sets up the defaults=dev/release flag options, which is needed
|
|
|
|
// before `flag.Parse` has been called
|
|
|
|
func DefaultsFlag(cmd *cobra.Command) BindOpt {
|
|
|
|
// define a flag so that the flag parsing system will be happy.
|
2019-05-31 23:47:48 +01:00
|
|
|
defaults := DefaultsType()
|
|
|
|
|
2019-04-19 19:17:30 +01:00
|
|
|
// we're actually going to ignore this flag entirely and parse the commandline
|
|
|
|
// arguments early instead
|
|
|
|
_ = cmd.PersistentFlags().String("defaults", defaults,
|
|
|
|
"determines which set of configuration defaults to use. can either be 'dev' or 'release'")
|
|
|
|
|
2019-05-31 23:47:48 +01:00
|
|
|
switch defaults {
|
2019-04-19 19:17:30 +01:00
|
|
|
case "dev":
|
|
|
|
return UseDevDefaults()
|
|
|
|
case "release":
|
|
|
|
return UseReleaseDefaults()
|
|
|
|
default:
|
|
|
|
panic(fmt.Sprintf("unsupported defaults value %q", FindDefaultsParam()))
|
2019-03-12 12:51:06 +00:00
|
|
|
}
|
|
|
|
}
|