`#stat_doc` extends the document from stat desc property.
Add this attribute macro to the remaining Stats structs.
Signed-off-by: Ming Yang <minos.future@gmail.com>
task_avg_nvcsw() was incorrectly returning a bool instead of u64,
limiting the impact of the lowlatency boost.
Fix it by returning the proper type (u64).
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
When a task is the last one running on a CPU and still wants to
continue, allow it to run and replenish its time only if the used CPU is
part a fully idle SMT core.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
During ttwu, the kernel may decide to skip ->select_task_rq() (e.g.,
when only one CPU is allowed or migration is disabled). This causes to
call ops.enqueue() directly without having a chance to call
ops.select_cpu().
Therefore, introduce a new flag (select_cpu_done) in the local task
context to determine if ops.select_cpu() was bypassed and, in that case,
attempt to find an idle CPU directly from ops.enqueue().
In the future this information will be supplied by the kernel through a
special enqueue flag (SCX_ENQ_CPU_SELECTED) [1]. However, the custom
flag in the local task context ensures to reliably determine the same
information, even on older kernels where this flag is not available.
[1] https://lore.kernel.org/lkml/20240928003840.GA2717@maniforge/T
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Remove cast_mask() function distributed throughout different schedulers
and add it in common.bpf.h so every scheduler can reference it once they
need to.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
The usage of cast_mask() within bpfland_enqueue aims to cast the type of
"p->cpus_ptr" from "struct bpf_cpumask *" to "const struct cpumask *".
However, the type of "p->cpus_ptr" is already "const cpumask_t *" aka
"const struct cpumask *", so no conversion is needed.
Passing a value of type "struct cpumask *" into "struct bpf_cpumask *"
also leads to compiling error.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
On WAKE_SYNC attempt to migrate the wakee on the same CPU as the waker
if the waker is not exiting, the wakee can use the waker's CPU, the
waker's L3 domain is not saturated and there are not other tasks queued
to the local DSQ of the waker's CPU.
This is the same logic used in scx_rusty.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Using the turbo boosted CPUs as preferred scheduling seems to be
beneficial only a very few corner cases, for example on battery-powered
devices with an aggressive cpufreq governor that constantly tries to
scale down the frequency (and even in this case it's probably better to
not force the tasks to run on the fast CPUs, to save power).
In practive the preferred domain seems to introduce more overhead than
benefits overall, so let's get rid of it.
This can be improved in the future adding multiple user-configurable
scheduling domains.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Use `cargo fmt` with a specific nightly branch in the CI to enforce formatting. Globally format these files while the diff is still small so we can stay on top of it.
Test plan:
- CI lint check passes.
Using p->scx.slice to evaluate the consumed time slice can be a bit
imprecise, because the sched_ext core implements yielding by setting
p->scx.slice to 0.
When the task's vruntime is evaluated this is considered as the task has
exhausted its entire allocated time slice, even though it voluntarily
released the CPU before the slice fully expired.
To avoid this inaccuracy and prevent penalizing tasks that voluntarily
release the CPU, always evaluate the used time slice based on the
difference in the task's total execution time (p->se.sum_exec_runtime).
This method provides a more precise calculation of vruntime and results
in a fairer task's deadline evaluation.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
When selecting an idle CPU for a task that has been woken up, prioritize
reusing the same CPU if the waker and wakee share the same L3 cache.
Otherwise, attempt to migrate the wakee to the waker's CPU, provided it
is allowed by the wakee's scheduling domain.
This seems to consistently improve FPS performance when the system is
not operating over its full capacity.
Example:
$ __GL_SYNC_TO_VBLANK=0 vblank_mode=0 glxgears -geometry 800x600
- before: ~18305.77 FPS
- after: ~19060.62 FPS
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Rename "turbo domain" to "preferred domain", that conceptually is more
generic and introduce the new option `--preferred-domain CPUMASK`, which
allows users to define the preferred domain, specifying a cpumask as a
hex number. By default ("auto") the scheduler will always try to detect
and use the fastest CPUs in the system.
Moreover, adjust the cpufreq logic to use "auto" both with the
"balance_power" and "balance_performance" EPP profiles.
Then, enable "auto" mode by default: the scheduler will try to
automatically determine the optimal primary domain, preferred domain and
cpufreq level, based on the selected scheduler and energy profiles.
Tested-by: Piotr Gorski < piotr.gorski@cachyos.org >
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
In auto mode, rather than keeping the previous fixed cpuperf factor,
dynamically calculate it based on CPU utilization and apply it before a
task runs within its allocated time slot.
Interactive tasks consistently receive the maximum scaling factor to
ensure optimal performance.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Always consider the turbo domain when running in "auto" mode.
Additionally, when the turbo domain is used, split the CPU idle
selection logic into two stages:
1) in ops.select_cpu(), provide the task with a second opportunity to
remain within the same LLC
2) in ops.enqueue(), perform another check for an idle CPU, allowing
the task to move to a different LLC if an idle CPU within the same
LLC is not available.
This allows tasks to stick more on turbo-boosted CPUs and CPUs within
the same LLC.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
When tasks are changing CPU affinity it is pointless to try to find an
optimal idle CPU. In this case just skip the the idle CPU selection step
and let the task being dispatched to a global DSQ if needed.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Add hints for the cpufreq governor based on the selected scheduler's
performance profile and the current energy performance preference (EPP).
With this change applied the scheduler works as following:
scheduler profile (--primary-domain option):
- default:
- use all cores
- cpufreq: use default scaling factor
- powersave:
- use E-cores
- cpufreq: use min scaling factor
- performance:
- use P-cores
- cpufreq: use max scaling factor
- auto:
- EPP: power, powersave
- use E-cores
- cpufreq: use min scaling factor
- EPP: balance_power (typically battery-powered systems)
- use E-cores
- cpufreq: use default scaling factor
- EPP: balance_performance, performance
- use P-cores
- cpufreq: use max scaling factor
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
We want to directly dispatch only kthreads when local_kthreads is
enabled, not all tasks that can run on a single CPU.
Fixes: 7cc1846 ("scx_bpfland: always rely on prev_cpu with single-CPU tasks")
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
When selecting an idle for tasks that can only run on a single CPU,
always check if the previously used CPU is sill usable, instead of
trying to figure out the single allowed CPU looking at the task's
cpumask.
Apparently, single-CPU tasks can report a prev_cpu that is not in the
allowed cpumask when they rapidly change affinity.
This could lead to stalls, because we may end up dispatching the kthread
to a per-CPU DSQ that is not compatible with its allowed cpumask.
Example:
kworker/u32:2[173797] triggered exit kind 1026:
runnable task stall (kworker/2:1[70] failed to run for 7.552s)
...
R kworker/2:1[70] -7552ms
scx_state/flags=3/0x9 dsq_flags=0x1 ops_state/qseq=0/0
sticky/holding_cpu=-1/-1 dsq_id=0x8 dsq_vtime=234483011369
cpus=04
In this case kworker/2 can only run on CPU #2 (cpus=0x4), but it's
dispatched to dsq_id=0x8, that can only be consumed by CPU 8 => stall.
To prevent this, do not try to figure out the best idle CPU for tasks
that are changing affinity and just dispatch them to a global DSQ
(either priority or regular, depending on its interactive state).
Moreover, introduce an explicit error check in dispatch_direct_cpu() to
improve detection of similar issues in the future, and drop
lookup_task_ctx() in favor of try_lookup_task_ctx(), since we can now
safely handle all the cases where the task context is not found.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Aggressively try to keep tasks running on the same CPU / cache / domain,
to achieve higher performance when the system is not over commissioned.
This is done by giving a second chance in ops.enqueue(), in addition to
ops.select_cpu(), to find an idle CPU close to the previously used CPU.
Moreover, even if the task is dispatched to the global DSQs, always try
to check if there is an idle CPU in the primary domain that can
immediately consume the task.
= Results =
This change seems to provide a minor, but consistent, boost of
performance with the CPU-intensive benchmarks from the CachyOS
benchmarks selection [1].
Similar results can also be noticed with some WebGL benchmarks [2], when
system usage is close to its maximum capacity.
Test:
- cachyos-benchmarker
System:
- AMD Ryzen 7 5800X 8-Core Processor
Metrics:
- total time: elapsed time of all benchmarks
- total score: geometric mean of all benchmarks
NOTE: total time is the most relevant, since it gives a measure of the
aggregate performance, while the total score emphasizes more on
performance consistency across all benchmarks.
== Results: summary ==
+-------------------------+---------------------+---------------------+
| Scheduler | Total Time | Total Score |
| | (less = better) | (less = better) |
+-------------------------+---------------------+---------------------+
| EEVDF | 624.44 sec | 123.68 |
| bpfland | 625.34 sec | 122.21 |
| bpfland-task-affinity | 623.67 sec | 122.27 |
+-------------------------+---------------------+---------------------+
== Conclusion ==
With this patch applied, bpfland shows both a better performance and
consistency. Although the gains are small (less than 1%), they are still
significant for this type of benchmark and consistently appear across
multiple runs.
[1] https://github.com/CachyOS/cachyos-benchmarker
[2] https://webglsamples.org/aquarium/aquarium.html
Tested-by: Piotr Gorski < piotr.gorski@cachyos.org >
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Rely on scx_utils::Topology to classify Big, Little and Turbo CPUs.
Moreover, support the special keyword "all" with --primary-domain to
include all the CPUs in the system (default).
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Integrate the logic used by scx_bpfland to detect turbo-boosted cores in
Topology.
Also change the logic to detect Big/Little cores in function of
base_frequency, instead of scaling_max_freq, otherwise turbo-boosted
cores in homogeneous systems may be incorrectly classified as Big.
Moreover, introduce the following new methods to Cpu to check for the
core type:
- is_turbo(): return true if the CPU is Turbo, false otherwise
- is_big(): return true if the CPU is either Turbo or Big
- is_little(): return true if the CPU is Little
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
When creating the turbo boost scheduling domain, we might use a full CPU
mask (selecting all possible CPUs) to indicate "do not prioritize turbo
boost CPUs" or when all CPUs have the same maximum frequency.
This approach works when the primary domain also contains all the CPUs,
as the complete overlap allows the CPU selection logic to ignore the
turbo boost domain and start picking CPUs directly from the primary
domain.
However, if the primary domain doesn't include all CPUs, the two domains
won't fully overlap, which can lead to the turbo boost domain
incorrectly including all CPUs, thereby negating the restrictions set by
the primary scheduling domain.
To resolve this, an empty CPU mask should be used for the turbo boost
domain when turbo boost CPUs aren't prioritized. If the turbo boost
domain is empty, it should be entirely bypassed, and the selection
should proceed directly to the primary domain.
Reported-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Avoid to periodically read the current performance profile from
/sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference if
it's not available (i.e., with older CPUs or kernels without cpufreq).
This fixes issue #560.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
meson build script was building each rust sub-project under rust/ and
scheds/rust/ separately. This means that each rust project is built
independently which leads to a couple problems - 1. There are a lot of
shared dependencies but they have to be built over and over again for each
proejct. 2. Concurrency management becomes sad - we either have to unleash
multiple cargo builds at the same time possibly thrashing the system or
build one by one.
We've been trying to solve this from meson side in vain. Thankfully, in
issue #546, @vimproved suggested using cargo workspace which makes the
sub-projects share the same target directory and built together by the same
cargo instance while still allowing each project to behave independently for
development and publishing purposes.
Make the following changes:
- Create two cargo workspaces - one under rust/, the other under
scheds/rust/. Each contains all rust projects underneath it.
- Don't let meson descend into rust/. These are libraries used by the rust
schedulers. No need to build them from meson. Cargo will build them as
needed.
- Change the rust_scheds build target to invoke `cargo build` in
scheds/rust/ and let cargo do its thing.
- Remove per-scheduler meson.build files and instead generate custom_targets
in scheds/rust/meson.build which invokes `cargo build -p $SCHED`.
- This changes rust binary directory. Update README and
meson-scripts/install_rust_user_scheds accordingly.
- Remove per-scheduler Cargo.lock as scheds/rust/Cargo.lock is shared by all
schedulers now.
- Unify .gitignore handling.
The followings are build times on Ryzen 3975W:
Before:
________________________________________________________
Executed in 165.93 secs fish external
usr time 40.55 mins 2.71 millis 40.55 mins
sys time 3.34 mins 36.40 millis 3.34 mins
After:
________________________________________________________
Executed in 36.04 secs fish external
usr time 336.42 secs 0.00 millis 336.42 secs
sys time 36.65 secs 43.95 millis 36.61 secs
Wallclock time is reduced 5x and CPU time 7x.
Three of the reported stats are cumulative. While they obviously can be
processed into delta values, that holds for the other direction too and the
cumulative values are difficult to make intutive sense of. Report interval
delta values instead.
Note that a stats client can reliably build back cumulative values even
under heavy system contention - the delta values reported between two
consecutive reads are guaranteed to be correct regardless of the duration of
the interval.
Use scx_stats instead of prometheus for stats reporting. This has a few
advantages:
- Stats metadata can be defined more succinctly.
- Natural support for nesting statistics which will be useful in making
scheduler components composable.
- Support for multiple programmable readers where each reader can use their
own reading interval.
- Built-in stats help message generation.
- Openmetrics integration is still available through
scx_stats/scripts/scxstats_to_openmetrics.py.
Keep evaluating the average number of voluntary context switches for
each task when lowlatency mode is enabled, even when interactive tasks
classification is disabled (via `-c 0`).
The average nvcsw is also used in lowlatency mode to evaluate the
proportional bonus to the tasks' deadline and it shouldn't be ignored
when interactive tasks classification is disabled. Moreover, make sure
that such bonus never exceeds the starvation threshold.
Keep in mind that it is still possible to disable the periodic average
nvcsw evaluation with `-c 0`, without specifying `--lowlatency`.
Fixes: 6a22853 ("scx_bpfland: introduce --lowlatency option")
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Make `--primar-domain auto` aware of turbo boosted CPUs and prioritize
them over the primary scheduling domain when the energy model
`balance_power` is used (typically when running on battery power with
the "balanced" profile).
With this change the scheduling hierarchy becomes the following:
1) CPUs in the turbo scheduling domain
2) CPUs in the primary scheduling domain
3) full-idle SMT CPUs
4) CPUs in the same L2 cache
5) CPUs in the same L3 cache
6) CPUs in the task's allowed domain
And the idle selection logic is modified as following:
- In the turbo scheduling domain:
- pick same full-idle SMT CPU
- pick any other full-idle SMT CPU sharing the same L2 cache
- pick any other full-idle SMT CPU sharing the same L3 cache
- pick any other full-idle SMT CPU
- pick same idle CPU
- pick any other idle CPU sharing the same L2 cache
- pick any other idle CPU sharing the same L3 cache
- pick any other idle SMT CPU
- In the primary scheduling domain:
- pick same full-idle SMT CPU
- pick any other full-idle SMT CPU sharing the same L2 cache
- pick any other full-idle SMT CPU sharing the same L3 cache
- pick any other full-idle SMT CPU
- pick same idle CPU
- pick any other idle CPU sharing the same L2 cache
- pick any other idle CPU sharing the same L3 cache
- pick any other idle SMT CPU
- In the entire task domain:
- pick any other idle CPU
Keep in mind that the turbo domain will be evaluated only when the
scheduler is started with `--primary-domain auto` and only when the
`balance_power` energy profile is used.
The turbo domain is always made using the subset of CPUs in the system
with the highest max frequency. If such subset can't be determined (for
example if all the CPUs in the primary domain have all the same
frequency), the turbo domain will be ignored.
Prioritizing turbo boosted CPUs can help to improve performance by
forcing the governor to scale up their frequency, without increasing too
much power consumption, due to the fact that tasks will be preferably
confined into a reduced amount of cores.
This change seems to improve performance, without increasing much
power consuption, on Intel laptops while using the `balanced_power`
energy profile.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Introduce the new option `--primary-domain auto`. With this option the
scheduler will dynamically adjusts the primary scheduling domain at
run-time, in function of the current energy profile reported in
/sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference.
When the `power` energy profile is selected, the primary scheduling
domain will prioritize E-cores. Alternatively, when the `performance`
profile is selected, it will prioritize P-cores. For all the other
energy profiles, all the CPUs in the system will be used.
Note that this option is only relevant on hybrid architectures with
P-cores and E-cores.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Introduce the new `--lowlatency` option, which enables switching between
the default pure vruntime-based scheduling (more optimized for server
workloads) and a deadline-based scheduling (better suited for
low-latency workloads).
When the low-latency mode is activated, a task's deadline is calculated
as its vruntime, adjusted by a bonus proportional to the task's average
number of voluntary context switches (the more voluntary context
switches, the shorter the deadline).
This feature enhances the prioritization of interactive tasks even more,
proportionally to their average voluntary context switches, also within
the two main global queues (priority / shared) and it helps to maintain
interactive workloads always responsive, even in presence of heavy
non-interactive background work.
Low-latency mode allows to prevent audio cracking even in presence of a
large amount of short-lived tasks with pseudo-interactive behavior (i.e,
hackbench) and it enables achieving approximately a +33% average
frames-per-second (FPS) in the typical "gaming while building the
kernel" benchmark.
However, it can also amplify the de-prioritization of CPU-intensive
tasks, making this option more suitable for specific low-latency
scenarios. Therefore the low-latency mode is disabled by default and it
can only be enabled via the `--lowlatency` option.
Tested-by: Piotr Gorski (piotrgorski@cachyos.org)
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Explicitly replenish the task's time slice from ops.dispatch() if the
task still wants to run and no other task is selected. In this way the
sched_ext core won't automatically re-schedule the task on the same CPU,
implicitly assigning a time slice of SCX_SLICE_DFL.
Moreover, instead of determining the task time slice in ops.enqueue(),
refresh the time slice immediately before the task is started on its
assigned CPU in ops.running().
This allows to use a more precise time slice, adjusted based on the
actual amount of tasks that are currently waiting to be scheduled.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
With the global scx_utils::NR_CPU_IDS we don't need Topology anymore in
init_primary_domain(), so drop the variable to fix the following build
warning:
warning: unused variable: `topo`
--> src/main.rs:385:9
|
385 | topo: &Topology,
| ^^^^ help: if this is intentional, prefix it with an underscore: `_topo`
|
= note: `#[warn(unused_variables)]` on by default
Fixes: 1da249f ("scx_utils::topology: Always use NR_CPU_IDS and NR_CPUS_POSSIBLE")
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Use the base frequency, instead of maximum frequency, to classify fast
and slow CPUs. This ensures accurate distinction between Intel Turbo
Boost CPUs and genuinely faster CPUs when auto-detecting the primary
scheduling domain.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
