- This makes the scheduler side simpler and allows on-demand monitoring.
- OpenMetrics support is dropped for now. Will add a generic tool for it.
- This is a naive conversion. Will be further refined.
scx_layered no longer prints statistics by default. To watch statistics, run
`scx_layered --monitor` while the scheduler is running.
Allow to specify a primary scheduling domain via the new command line
option `--primary-domain CPUMASK`, where CPUMASK can be a hex number of
arbitrary length, representing the CPUs assigned to the domain.
If this option is not specified the scheduler will use all the available
CPUs in the system as primary domain (no behavior change).
Otherwise, if a primary scheduling domain is defined, the scheduler will
try to dispatch tasks only to the CPUs assigned to the primary domain,
until these CPUs are saturated, at which point tasks may overflow to
other available CPUs.
This feature can be used to prioritize certain cores over others and it
can be really effective in systems with heterogeneous cores (e.g.,
hybrid systems with P-cores and E-cores).
== Example (hybrid architecture) ==
Hardware:
- Dell Precision 5480 with 13th Gen Intel(R) Core(TM) i7-13800H
- 6 P-cores 0..5 with 2 CPUs each (CPU from 0..11)
- 8 E-cores 6..13 with 1 CPU each (CPU from 12..19)
== Test ==
WebGL application (https://webglsamples.org/aquarium/aquarium.html):
this allows to generate a steady workload in the system without
over-saturating the CPUs.
Use different scheduler configurations:
- EEVDF (default)
- scx_bpfland using P-cores only (--primary-domain 0x00fff)
- scx_bpfland using E-cores only (--primary-domain 0xff000)
Measure performance (fps) and power consumption (W).
== Result ==
+-----+-----+------+-----+----------+
| min | max | avg | | |
| fps | fps | fps | stdev | power |
+-----------------+-----+-----+------+-------+--------+
| EEVDF | 28 | 34 | 31.0 | 1.73 | 3.5W |
| bpfland-p-cores | 33 | 34 | 33.5 | 0.29 | 3.5W |
| bpfland-e-cores | 25 | 26 | 25.5 | 0.29 | 2.2W |
+-----------------+-----+-----+------+-------+--------+
Using a primary scheduling domain of only P-cores with scx_bpfland
allows to achieve a more stable and predictable level of performance,
with an average of 33.5 fps and an error of ±0.5 fps.
In contrast, using EEVDF results in an average frame rate of 31.0 fps
with an error of ±3.0 fps, indicating slightly less consistency, due to
the fact that tasks are evenly distributed across all the cores in the
system (both slow and fast cores).
On the other hand, using a scheduling domain solely of E-cores with
scx_bpfland results in a lower average frame rate (25.5 fps), though it
maintains a stable performance (error of ±0.5 fps), but the power
consumption is also reduced, averaging 2.2W, compared to 3.5W with
either of the other configurations.
== Conclusion ==
In summary, with this change users have the flexibility to prioritize
scheduling on performance cores for better performance and consistency,
or prioritize energy efficient cores for reduced power consumption, on
hybrid architectures.
Moreover, this feature can also be used to minimize the number of cores
used by the scheduler, until they reach full capacity. This capability
can be useful for reducing power consumption even in homogeneous systems
or for conducting scheduling experiments with smaller sets of cores,
provided the system is not overcommitted.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Abbreviate the statistics reported to stdout and remove the slice_ms
metric: this metric can be easily derived from slice_ns, slice_ns_min
and nr_wait, which is already reported to stdout.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Layer matching currently takes a large number of bpf instructions.
Moving layer matching to a global function will reduce the overall
instruction count and allow for other layer matching methods such as
glob.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Put a performance-critical task to a performance critical queue and a
regular task to a regular queue.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
The logic of tasks filtering were moved from find_first_candidate() into
a vector filter operation in commit 1c3b563. However, it was forgotten
to transfer the logic with "NOT" since now .filter() will populate the
tasks we want, rather than .skip_while() which was throwing unwanted
tasks out.
That's why the logic here should be reverse so we won't take kworker or
migrated tasks into considerations.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
The member "topo_map" in Scheduler is never used and thus should be
removed, the related imports are removed as well.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Re-add the partial mode option that was dropped during the refactoring.
The partial option allows to apply the scheduler only to the tasks which
have their scheduling policy set to SCHED_EXT via sched_setscheduler().
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
The API for determining which PID is running on a specific CPU is racy
and is unnecessary since this information can be obtained from user
space.
Additionally, it's not reliable for identifying idle CPUs. Therefore,
it's better to remove this API and, in the future, provide a cpumask
alternative that can export the idle state of the CPUs to user space.
As a consequence also change scx_rustland to dispatch one task a time,
instead of dispatching tasks in batches of idle cores (that are usually
not accurate due to the racy nature of the CPU ownership interaface).
Dispatching one task at a time even makes the scheduler more performant,
due to the vruntime scheduling being applied to more tasks sitting in
the scheduler's queue.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Drop the slice boost logic and apply a vruntime and task time slice
evaluation approach similar to scx_bpfland (but implement this in the
user-space component instead of the BPF part).
Additionally, introduce a slice_us_min parameter to define the minimum
time slice that can be assigned to a task, also similar to scx_bpfland.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Use the same idle selection logic used in scx_bpfland also in
scx_rustland_core.
Also drop fifo_mode and always use the BPF idle selection logic by
default as long as the system is not saturated, unless full_user is
specified.
This approach allows user-space schedulers aiming for maximum
performance to leverage the BPF idle selection logic (bypassing
user-space), while those seeking full control can enable full_user to
bypass the BPF CPU idle selection logic and choose the target CPU for
each task from user-space.
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
We don't need to send the number of voluntary context switches (nvcsw)
from BPF to user-space, as this information is already accessible in
user-space via procfs. Sending this data would only create unnecessary
overhead for schedulers that don't require it, and those that do can
easily retrieve it through procfs.
Therefore, drop this metric from scx_rustland_core and change
scx_rustland implementing an interactive task classifier fully in the
user-space part of the scheduler.
Also drop some options that are not provide any significant benefit
(also in preparation of a bigger refactoring to define a better API for
the user-space framework).
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
- Use .enumerate() consistently while building the cpu_fids vector.
- Use .then_with() to chain .cmp() when sorting cpu_fids.
Both reduce visual clutter.
Add a parameter to disable topology awareness. This is useful when
trying to compare the scheduling performance of topology aware
scheduling compared to the previous scheduling strategy.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
With optimizations of calculatring ineligibility duration, now the
scheduler works well under heavy load without 2-level scheduling, so we
drop it for simplicitiy.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
This commit include a few changes:
- treat a new forked task more conservatively
- defer the execution of more tasks for longer time using ineligibility duration
- consider if a task is waken up in calculating ineligibility duration
