Tasks are consumed from various DSQs in the following order:
per-CPU DSQs => priority DSQ => shared DSQ
Tasks in the shared DSQ may be starved by those in the priority DSQ,
which in turn may be starved by tasks dispatched to any per-CPU DSQ.
To mitigate this, record the timestamp of the last task scheduling event
both from the priority DSQ and the shared DSQ.
If the starvation threshold is exceeded without consuming a task, the
scheduler will be forced to consume a task from the corresponding DSQ.
The starvation threshold can be adjusted using the --starvation-thresh
command line parameter (default is 5ms).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
There is no need to RCU protect the cpumask for the offline CPUs: it is
created once when the scheduler is initialized and it's never
deallocated.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reduce the default time slice down to 5ms for a faster reaction and
system responsiveness when the system is overcomissioned.
This also helps to provide a more predictable level of performance.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Always use direct CPU dispatch for kthreads, there is no need to treat
kthreads in a special way, simply reuse direct CPU dispatch to
prioritize them.
Moreover, change direct CPU dispatches to use scx_bpf_dispatch_vtime(),
since we may dispatch multiple tasks to the same per-CPU DSQ now.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Small refactoring of the idle CPU selection logic:
- optimize idle CPU selection for tasks that can run on a single CPU
- drop the built-in idle selection policy and completely rely on the
custom one
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
We are incorrectly using the SMT idle cpumask to find any idle CPU, fix
by using the generic idle cpumask.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Implement CPU hotplugging in scx_bpfland without restarting the
scheduler.
The idle selection logic has been updated to consider online CPUs.
Additionally, a cpumask for offline CPUs has been introduced. Tasks
that have been dispatched to the DSQs associated with offline CPUs are
consumed by the other CPUs that are still online.
Moreover, the dependency on the Topology crate is temporarily dropped
and instead, /sys/devices/system/cpu/smt/active is used to determine if
SMT should be taken into account during idle selection. The Topology
crate will be re-introduced later when scx_bpfland will gain more
topology-aware capabilities.
This fixes#406.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The stats map in scx_rusty is a BPF_MAP_TYPE_PERCPU_ARRAY, with its size
determined by num_possible_cpus(). Initializing it with nr_cpu_ids() can
result in errors such as:
Error: Failed to zero stat
Caused by:
number of values 6 != number of cpus 8
Fix by using num_possible_cpus() to initialize it.
Fixes: 263e02f6 ("rusty: Use nr_cpu_ids instead of nr_cpus_possible")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When fetching external git repositories (libbpf and bpftool) we don't
check if the target commit exists.
This can leads to issues such as #400, because we may silently use HEAD,
instead of the specified commit.
Prevent this by returning an error when the target SHA1 cannot be found.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This change adds the ability to customize the log recorder format for
each metric type. There is a default format that is used if no custom
`MetricFormatter` is provided. This is the same format that was used
before this change.
The `MetricFormatter` should be implemented by the user to customize the
format of the log recorder. The `LogRecorderBuilder` now takes a
`MetricFormatter` as an optional parameter.
Following changes will allow additional customization of the log
recorder format, such as how many metrics are logged per line.
Signed-off-by: Jose Fernandez <josef@netflix.com>
The upstrem bpftool git repo (https://github.com/libbpf/bpftool.git) is
periodically force pushed and the specific commit that we needed is not
available anymore.
Instead of failing we are actually fetching the latest bpftool (HEAD)
that introduced some breakage initially fixed by commit e59c48a6
("Update libbpf commit hash").
However, updating libbpf seems to introduce a run-time problem and all
the schedulers are failing to start:
libbpf: failed to find skeleton map ''
libbpf: failed to populate skeleton maps for 'bpf_bpf': -3
So, revert libbpf to the previous version and update the commit for
bpftool to use a version that still allows to generate a compatible BPF
skel.
Fixes: e59c48a6 ("Update libbpf commit hash")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
With commit 5d20f89a ("scheds-rust: build rust schedulers in sequence"),
schedulers are now built serially one after the other to prevent meson
and cargo from forking NxN parallel tasks.
However, this change has made building a single scheduler much more
cumbersome, due to the chain of dependencies.
For example, building scx_rusty using the specific meson target would
still result in all schedulers being built, because they all depend on
each other.
To address this issue, introduce the new meson build option
`serialize=true|false` (default is false).
This option allows to disable the schedulers' build chain, restoring the
old behavior.
With this option enabled, it is now possible to build just a single
scheduler, parallelizing the cargo build properly, without triggering
the build of the others. Example:
$ meson setup build -Dbuildtype=release -Dserialize=false
$ meson compile -C build scx_rusty
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
libbpf has added a member `link` in the struct `bpf_map_skeleton`, which causes
a build failure in SCX. This commit updates the libbpf commit hash to the latest
version to avoid this error.
Please refer to commit be998aa in libbpf repo.
Signed-off-by: Yu-Cheng Chen <otteryc210@gmail.com>
The competition window was 7.5 msec, half of the targeted latency.
However, it is too wide for some workloads, so unrelated tasks may
compete with each other. Hence, it is tightened to about 1 msec with
LAVD_LAT_WEIGHT_SHIFT to avoid unnecessary competition.
Also, when a system is overloaded, now the time space is stretched more
aggressively (i.e., lat_prio^2) when a task's latency priority is low
(high value).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Introduce a tunable to set a limit of the minimum vruntime that is used
when a task is dispatched, as:
vtime_min = vtime_now - slice_lag_ns
Increasing the time slice lag can make interactive tasks even more
responsive at the cost of starving regular and newly created tasks.
Default time slice lag is 0.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Overview
========
This scheduler is derived from scx_rustland, but it is fully implemented
in BFP with minimal user-space Rust part to process command line
options, collect metrics and logs out scheduling statistics.
Unlike scx_rustland, all scheduling decisions are made by the BPF
component.
Motivation
==========
The primary goal of this scheduler is to act as a performance baseline
for comparison with scx_rustland, allowing for a better assessment of
the overhead caused by kernel/user-space interactions.
It can also be used to deploy prototypes initially tested in the
scx_rustland scheduler. In fact, this scheduler is expected to
outperform scx_rustland, due to the elimitation of the kernel/user-space
overhead.
Scheduling policy
=================
scx_bpfland is a vruntime-based sched_ext scheduler that prioritizes
interactive workloads. Its scheduling policy closely mirrors
scx_rustland, but it has been re-implemented in BPF with some small
adjustments.
Tasks are categorized as either interactive or regular based on their
average rate of voluntary context switches per second: tasks that exceed
a specific voluntary context switch threshold are classified as
interactive.
Interactive tasks are prioritized in a higher-priority DSQ, while
regular tasks are placed in a lower-priority DSQ. Within each queue,
tasks are sorted based on their weighted runtime, using the built-in scx
vtime ordering capabilities (scx_bpf_dispatch_vtime()).
Moreover, each task gets a time slice budget. When a task is dispatched,
it receives a time slice equivalent to the remaining unused portion of
its previously allocated time slice (with a minimum threshold applied).
This gives latency-sensitive workloads more chances to exceed their time
slice when needed to perform short bursts of CPU activity without being
interrupted (i.e., real-time audio encoding / decoding workloads).
Results
=======
According to the initial test results, using the same benchmark "playing
a videogame while recompiling the kernel", this scheduler seems to
provide a +5% improvement in the frames-per-second (fps) compared to
scx_rustland, with video games such as Cyberpunk 2077, Counter-Strike 2
and Baldur's Gate 3.
Initial test results indicate that this scheduler offers around a +5%
improvement in frames-per-second (fps) compared to scx_rustland when
using the benchmark "playing a video game while recompiling the kernel".
This improvement was observed in games such as Cyberpunk 2077,
Counter-Strike 2, and Baldur's Gate 3.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
If CONFIG_DEBUG_INFO_BTF is not enabled in the kernel, the C schedulers
report the following error via libbpf, clearly indicating the missing
kernel config:
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
In contrast, the Rust schedulers report a less clear error:
thread 'main' panicked at /home/arighi/src/scx/rust/scx_utils/src/compat.rs:23:9:
btf__load_vmlinux_btf() returned NULL
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Make sure to report a similar error, so that users have a better clue
about the missing kernel config. After this change the error looks like
the following:
thread 'main' panicked at /home/arighi/src/scx/rust/scx_utils/src/compat.rs:23:9:
btf__load_vmlinux_btf() returned NULL, was CONFIG_DEBUG_INFO_BTF enabled?
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The old approach was too conservative in running a new task, so when a
fork-heavy workload competes with a CPU-bound workload, the fork-heavy
one is starved. The new approach solves the starvation problem by
inheriting parent's statistics. It seems a good (at least better than
old) guess how a new task will behave.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
When the system is highly loaded with compute-intensive tasks, the old
setting chokes latensive-intensive tasks, so loosen the dealine when the
system is overloaded (> 100% utilization).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
When the lavd is loaded, it prints out its build id. It helps to easily
identify what version it is when testing.
```
01:56:54 [INFO] scx_lavd scheduler is initialized (build ID: 0.8.1-g98a5fa8595430414115c504857cea1a458393838-dirty x86_64-unknown-linux-gnu)
```
Signed-off-by: Changwoo Min <changwoo@igalia.com>
The synchronization for mitosis is a bit ad-hoc, working around lack of
atomics in BPF. This commit updates the logic to use READ/WRITE_ONCE and
compiler barriers to get the behaviors we want.
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
When someone is testing schedulers, we often have to ask what version
the scheduler is running as. Now that we can access the build ID from
rust schedulers, let's update scx_rusty to print the build ID when rusty
first starts running.
This results in output such as the following:
```
[void@maniforge scx]$ rusty
19:04:26 [INFO] Running scx_rusty (build ID: 0.8.1-g2043d2537f37c8d75753bb65eb75bca965067564 x86_64-unknown-linux-gnu/debug)
19:04:26 [INFO] NUMA[00] mask= 0b11111111111111111111111111111111
19:04:26 [INFO] DOM[00] mask= 0b00000000111111110000000011111111
19:04:26 [INFO] DOM[01] mask= 0b11111111000000001111111100000000
19:04:26 [INFO] Rusty scheduler started!
```
Signed-off-by: David Vernet <void@manifault.com>
We want schedulers to be able to print, log, etc the build ID of the
repository. To do this, we can use the vergen Cargo crate to generate
environment variables that contain values that we can export from scx_utils.
This patch update scx_utils accordingly to use vergen to generate build
ID output that can be printed from schedulers. A subsequent patch will
update scx_rusty to print this build ID value.
Signed-off-by: David Vernet <void@manifault.com>
