Scale the task's time slice based on the average amount of tasks that
are currently waiting to be dispatched.
Use a moving average for the amount of waiting tasks to smooth out
potential spikes caused by temporary bursts of tasks piling in the wait
queues.
This was initially modeled in scx_rustland and it seems to work pretty
well also in scx_bpfland now.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Instead of using a static value to classify tasks based on their average
amount of voluntary context switches, try to periodically evaluate an
optimal threshold, based on a global average of voluntary context
switches among of all the running tasks.
Tasks with an average amount of voluntary context switches greater than
the global average will be classified as interactive.
The global average is evaluated as an exponentially weighted moving
average (EWMA), as:
avg(t) = avg(t - 1) * 0.75 - task_avg(t) * 0.25
This approach is more efficient than iterating through all tasks and it
helps to prevent rapid fluctuations that may be caused by bursts of
voluntary context switch events.
The dynamic nvcsw threshold enables a more precise adjustment of
the classification criteria to swiftly respond to global system changes:
tasks can be quickly classified as interactive, but if the system
experiences too many interactive events, the criteria for maintaining
interactive status become stricter. This creates a natural selection
process where only the most deserving tasks remain interactive.
Additionally, introduce the new option `--nvcsw-max-thresh N`, which
allows to extend or restrict the fluctuation range of the global average
threshold for voluntary context switches.
Tested-by: Piotr Gorski <piotrgorski@cachyos.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
We always use nr_cpu_ids to represent the maximum CPU id returned by
scx_bpf_nr_cpu_ids().
Replace cpu_max with nr_cpu_ids to be more consistent with the rest of
the code.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
We can rely on scx_bpf_nr_cpu_ids() to create all the possible per-CPU
DSQs, eliminating the need for the hard-coded limit MAX_CPUS.
In this way scx_bpfland can support the same amount of CPUs that the
kernel can handle.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Instead of constantly checking the need to drain tasks from the DSQs of
the offline CPUs, provide an atomic flag to notify when there are tasks
to be drained from the offline CPUs.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Refine the safeguard mechanism to avoid generating too many interactive
tasks in the system, which could nullify the effect of the
interactive/regular task classification.
The safeguard mechanism operates by pausing the promotion of new tasks
to interactive status during the task wake-up process, whenever the
number of interactive tasks in the priority queue exceeds a specific
limit (set to 4x the number of online CPUs).
Halting the promotion of additional interactive tasks allows to
prioritize those already classified as interactive, thereby preventing
potential "bursts" of excessive interactive tasks in the system.
This refines the mitigation already provided by commit 640bd562
("scx_bpfland: prevent tasks from abusing interactive priority boost").
Fixes: 640bd562 ("scx_bpfland: prevent tasks from abusing interactive priority boost")
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Always assign the maximum time slice if there are idle CPUs in the
system.
Otherwise, double the task's unused time slice to reward tasks that use
less CPU time and at the same time refill the time slice of the tasks
every time they're dispatched.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
sched_ext is about to be merged upstream. There are some compatibility
breaking changes and we're making the current sched_ext/for-6.11
1edab907b57d ("sched_ext/scx_qmap: Pick idle CPU for direct dispatch on
!wakeup enqueues") the baseline.
Tag everything except scx_mitosis as 1.0.0. As scx_mitosis is still in early
development and is currently temporarily disabled, only the patchlevel is
bumped.
The priority boost for interactive tasks can be exploited to render the
system nearly unresponsive by creating numerous tasks that constantly
switch between wait/wakeup states.
For example, stress tests like `hackbench -l 10000` can significantly
degrade system responsiveness.
To mitigate this, limit the number of interactive tasks added to the
priority queue to 4x the number of online CPUs.
This simple approach appears to be a quite effective at identifying
potential spam of "fake" interactive tasks, while still prioritizing
legitimate interactive tasks.
Additionally, periodically refresh the interactive status of the tasks
based on their most recent average of voluntary context switches,
preventing the interactive status from being too "sticky".
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Avoid dispatching per-CPU kthreads directly, since this may cause
interactivity problems or unfairness, for example if there are too many
softirqs being scheduled (e.g., in presence of high RX network traffic
or when running certain stress tests, like hackbench).
Moreover, in order to help with testing and benchmarks, introduce the
option --local-kthread, that allows to restore the old behavior if
enabled.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
When updating the task vruntime, ensure the time slice delta is always a
positive value. Failing to do so may cause the global vruntime to
increase excessively due to overflows.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Periodically report the amount of online CPUs to stdout.
The online CPUs are initially evaluated looking at the online cpumask,
then the value is updated in the .cpu_offline() / .cpu_online()
callbacks.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Keep track of the CPUs that are running interactive tasks and report
their amount to stdout.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
The correct default value of slice_ns 5ms, not 5s.
This change doesn't really make any difference in practice, since these
values are changed by the Rust part when the scheduler is started, but
it's good to keep this aligned to the proper values for consistency.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Every time we need to dispatch a task re-evalate its time slice as:
(unused_time_slice + min_time_slice) / 2
This allows to refill the time slice for tasks that haven't used much of
their previously assigned time, improving fairness.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Make sure to always classify interactive tasks, even when the system is
not fully utilized. This ensures that if the system suddenly becomes
overloaded, we already know which tasks need to be dispatched to the
priority DSQ.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Tasks are consumed from various DSQs in the following order:
per-CPU DSQs => priority DSQ => shared DSQ
Tasks in the shared DSQ may be starved by those in the priority DSQ,
which in turn may be starved by tasks dispatched to any per-CPU DSQ.
To mitigate this, record the timestamp of the last task scheduling event
both from the priority DSQ and the shared DSQ.
If the starvation threshold is exceeded without consuming a task, the
scheduler will be forced to consume a task from the corresponding DSQ.
The starvation threshold can be adjusted using the --starvation-thresh
command line parameter (default is 5ms).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
There is no need to RCU protect the cpumask for the offline CPUs: it is
created once when the scheduler is initialized and it's never
deallocated.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reduce the default time slice down to 5ms for a faster reaction and
system responsiveness when the system is overcomissioned.
This also helps to provide a more predictable level of performance.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Always use direct CPU dispatch for kthreads, there is no need to treat
kthreads in a special way, simply reuse direct CPU dispatch to
prioritize them.
Moreover, change direct CPU dispatches to use scx_bpf_dispatch_vtime(),
since we may dispatch multiple tasks to the same per-CPU DSQ now.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Small refactoring of the idle CPU selection logic:
- optimize idle CPU selection for tasks that can run on a single CPU
- drop the built-in idle selection policy and completely rely on the
custom one
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
We are incorrectly using the SMT idle cpumask to find any idle CPU, fix
by using the generic idle cpumask.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Implement CPU hotplugging in scx_bpfland without restarting the
scheduler.
The idle selection logic has been updated to consider online CPUs.
Additionally, a cpumask for offline CPUs has been introduced. Tasks
that have been dispatched to the DSQs associated with offline CPUs are
consumed by the other CPUs that are still online.
Moreover, the dependency on the Topology crate is temporarily dropped
and instead, /sys/devices/system/cpu/smt/active is used to determine if
SMT should be taken into account during idle selection. The Topology
crate will be re-introduced later when scx_bpfland will gain more
topology-aware capabilities.
This fixes#406.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Introduce a tunable to set a limit of the minimum vruntime that is used
when a task is dispatched, as:
vtime_min = vtime_now - slice_lag_ns
Increasing the time slice lag can make interactive tasks even more
responsive at the cost of starving regular and newly created tasks.
Default time slice lag is 0.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Overview
========
This scheduler is derived from scx_rustland, but it is fully implemented
in BFP with minimal user-space Rust part to process command line
options, collect metrics and logs out scheduling statistics.
Unlike scx_rustland, all scheduling decisions are made by the BPF
component.
Motivation
==========
The primary goal of this scheduler is to act as a performance baseline
for comparison with scx_rustland, allowing for a better assessment of
the overhead caused by kernel/user-space interactions.
It can also be used to deploy prototypes initially tested in the
scx_rustland scheduler. In fact, this scheduler is expected to
outperform scx_rustland, due to the elimitation of the kernel/user-space
overhead.
Scheduling policy
=================
scx_bpfland is a vruntime-based sched_ext scheduler that prioritizes
interactive workloads. Its scheduling policy closely mirrors
scx_rustland, but it has been re-implemented in BPF with some small
adjustments.
Tasks are categorized as either interactive or regular based on their
average rate of voluntary context switches per second: tasks that exceed
a specific voluntary context switch threshold are classified as
interactive.
Interactive tasks are prioritized in a higher-priority DSQ, while
regular tasks are placed in a lower-priority DSQ. Within each queue,
tasks are sorted based on their weighted runtime, using the built-in scx
vtime ordering capabilities (scx_bpf_dispatch_vtime()).
Moreover, each task gets a time slice budget. When a task is dispatched,
it receives a time slice equivalent to the remaining unused portion of
its previously allocated time slice (with a minimum threshold applied).
This gives latency-sensitive workloads more chances to exceed their time
slice when needed to perform short bursts of CPU activity without being
interrupted (i.e., real-time audio encoding / decoding workloads).
Results
=======
According to the initial test results, using the same benchmark "playing
a videogame while recompiling the kernel", this scheduler seems to
provide a +5% improvement in the frames-per-second (fps) compared to
scx_rustland, with video games such as Cyberpunk 2077, Counter-Strike 2
and Baldur's Gate 3.
Initial test results indicate that this scheduler offers around a +5%
improvement in frames-per-second (fps) compared to scx_rustland when
using the benchmark "playing a video game while recompiling the kernel".
This improvement was observed in games such as Cyberpunk 2077,
Counter-Strike 2, and Baldur's Gate 3.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
