The SLIM project is abandoned and their last release was in 2013.
Because of this it poses a security risk to systems, no one is working
on it or picked up maintenance. It also lacks compatibility with systemd
and logind sessions. For users, there liikely isn't anything like slim
that's as lightweight in terms of dependencies.
When we did the revert of adding gnome-flashback to systemd.packages [0]
I forgot to test with other display managers. If we use GDM with gnome-flashback
it appears it doesn't try to fallback to non-systemd startup and always fails and
starts the regular gnome-session. So adding gnome-flashback to systemd.packages
was perfectly fine, but we did forgot one detail. We need systemd targets for the
customSessions which is added using mkSystemdTargetForWm in the gnome-
flashback package.
[0]: 42f567b30d
Instead of assign the libinput options to touchpad devices only, it
should be appied by any device using libinput.
Due to the fact that `40-libinput.conf` already defines libinput as
driver for any detected input device, we can use `MatchDriver` to appy
options.
I've noticed a similar issue in Pantheon, without this
sound theme installed there's no system sounds.
I believe it's because the gnome theme and the pantheon
theme inherit this one.
This reverts commit 60aedadc59.
Using tests from #71212 I am now unable to reproduce there being issues
with starting the default metacity flashback session without this.
We create a wrapper which launches gnome-shell with the correct environment and
cap_sys_nice.
We can then override gnome-shell-wayland.service to use this wrapper.
NOTE: We need to force clear the environment, because the defaults aren't good
for user services. That should probably be fixed.
This session would fail to start because we didn't have it in systemd.packages
(as we've switched to systemd gnome-session).
Haven't tested custom sessions.
Having `display-manager` conflict with `plymouth-quit` causes this lock up:
- `plymouth-quit-wait` starts up, waiting for plymouth-quit to run
- `lightdm` starts up
- `plymouth-quit` can't start, it conflicts with lightdm
- `plymouth-quit-wait` keeps waiting on plymouth-quit to kill plymouthd
The idea is having LightDM control when plymouth quits, but communication with
plymouth was broken: https://github.com/NixOS/nixpkgs/pull/71064
Unfortunately having the conflict breaks switching to configurations with
plymouth enabled. So we still need to remove the conflict.
fixes#71034
xfce4-volumed-pulse is not abandoned, but is superseded by a panel
plugin which is not available when not using the desktop.
Fixes: volume up/down keys support
These improvements come from shopping around
at what other downstreams have done with their
systemd units and recent changes like [0] to gdm.
Note there's no requries or after on dbus.socket because
settings BusName will set this up automaticallly and
give it a type of dbus.
[0]: 2d57f45962
- register gnome-session and gnome-settings-daemon services.
- gnome-shell is already registered due to having a xdg portal
- manually specify that gsd is wanted by gnome-session
(systemd.packages doesn't pick the .wants directories for some reason)
GDM is now killed if tty1 is started after gdm is launched. This follows
upstream's gdm service config.
This might cause problems with nixos-rebuild switch though. See the reasoning
and work that led to not following upstream on this:
https://github.com/NixOS/nixpkgs/issues/214394a180dac46d4da
Rules are a translation of what's done in the
GDM module and adjustments based of looking at
Arch Linux's configuration and upstream's.
A side effect of this change is that gnome-keyring
and kwallet modules should work as expected when in-
cluded.
Fixes#64259#62045
Since https://github.com/NixOS/nixpkgs/pull/61321, local-fs.target is
part of sysinit.target again, meaning units without
DefaultDependencies=no will automatically depend on it, and the manual
set dependencies can be dropped.
Adds:
- gnome-color-manager
- services.avahi
It appears that GeoClue requires its daemon and IIRC has
been default enabled in other distros for a while.
- orca
It's the default screen-reader.
The custom session script is always executed (when it exists). This change
passes the selected session script and select session name to the custom session
script, so that it can defer to the selected session script based on the value
of the selected session name.
This introduces the following options under the services.gnome3 namespace:
* core-os-services.enable
* core-shell.enable
* core-utilities.enable
* games.enable
The first three are all default enabled by gnome3.enable
and their purpose is to make gnome3 more flexable for users
usecases. In the case of core-utilities and games, it allows
users to easily switch on the default gnome3 applications
and games packages. Previously we had lists in gnome-3/default.nix
but they weren't visible to the user. By having options we have
generated documentation and an interface.
For some reason nm-applet has to be running for an authentication
dialog to be spawned by wingpanel-indicator-network.
This also fixes storing NetworkManager secrets in the keyring, but this
is still broken because we lack the proper PAM configuration.
Fix the following error when opening Background panel in GNOME Settings:
URI '/nix/store/…-simple-dark-gray-2016-02-19/share/artwork/gnome/nix-wallpaper-simple-dark-gray.png' is invalid
This module obsoletes services.gnome3.gnome-terminal-server
as that's a confusing option for users, and sounds internal.
It's much simpler to have a gnome-terminal module.
This allows xkbvalidate to be compiled via Clang and also has a few
other portability improvements, eg. it now can even be compiled on OS X,
even though it's probably not needed there.
In addition, I changed the binary name so that it matches the package
name.
I'm merging this in right now, because there is only the xserver NixOS
module where this is used, so the risk of a catastrophic breakage is
very low.
Checks and build done by ofborg also ran successfully and I also did a
few local tests (eg. running via valgrind to avoid leaks) to make sure
it's still working properly.
So far, the output binary has been just "validate", which is quite a
very generic name and doesn't match the package name.
Even though I highly doubt that this program will ever be used outside
of NixOS modules, it's nevertheless less confusing to have a consistent
naming.
Signed-off-by: aszlig <aszlig@nix.build>
When bluetooth is enabled, we install bluedevil, but
its applet cannot work without the qml components in
bluez-qt.
Superseedes #65440 that failed to address the issue.
Introduce a new .plasma5.phononBackend option. Default value
"gstreamer" installs the same packages as before. "vlc" installs
only the vlc phonon backend.
The old open-source driver for AMD/ATI GPUs is commonly known as "radeon"
despite the historical package name xf86-video-ati. For example it presents
itself as RADEON in the Xorg log. So adding "radeon" to videoDrivers should
work.
Also changed the docs for the videoDrivers option to use "radeon" in the
default value instead of "ati".
Fixes#37917
This enhances #61423, which removed the gating of desktop-managers from
being linked to the xserver's state.
This, though, brought in xterm into all systems, even those without X
servers.
This change sets the *default* of the xterm desktop-manager to the state
of the xserver, keeping it enabled by default as a sane fallback.
The xterm desktop-manager can still be enabled or disabled as needed,
without it being affected by xserver's state.
The geoclue module now lets us set application config. This should make
it more robust in desktop environments that don't define a geoclue
agent.
Fixes#45994.
* compton-git: 5.1-rc2 -> 6.2
vsync is now a boolean option, see:
https://github.com/yshui/compton/pull/130
menu-opacity is deprecated and there's a warning that says:
Please use the wintype option `opacity` of `popup_menu` and
`dropdown_menu` instead.
* nixos/compton: Keep vSync option backwards compatible
The new upstream option tries to make the best choice for the user.
Therefore the behaviour should stay the same with this backwards
compatibility patch.
* compton-git: Remove DRM option
It's deprecated and shouldn't be used.
https://github.com/yshui/compton/pull/130/files#r285505456
* compton-git: Remove new_backends option
Was removed in "Let old/new backends co-exist"
b0c5db9f5aa500dc3568cc6fe68493df98794d4d
* compton: 0.1_beta2.5 -> 6.2
Drop the legacy, unmaintained version and use the fork for real.
A new internal option `hardware.opengl.setLdLibraryPath` is added which controls if `LD_LIBRARY_PATH` should be set to `/run/opengl-driver(-32)/lib`. It is false by default and is meant to be set to true by any driver which requires it. If this option is false, then `opengl.nix` and `xserver.nix` will not set `LD_LIBRARY_PATH`.
Currently Mesa and NVidia drivers don't set `setLdLibraryPath` because they work with libglvnd and do not override libraries, while `amdgpu-pro`, `ati` and `parallels-guest` set it to true (the former two really need it, the last one doesn't build so is presumed to).
Additionally, the `libPath` attribute within entries of `services.xserver.drivers` is removed. This made `xserver.nix` add the driver path directly to the `LD_LIBRARY_PATH` for the display manager (including X server). Not only is it redundant when the driver is added to `hardware.opengl.package` (assuming that `hardware.opengl.enable` is true), in fact all current drivers except `ati` set it incorrectly to the package path instead of package/lib.
This removal of `LD_LIBRARY_PATH` could break certain packages using CUDA, but only those that themselves load `libcuda` or other NVidia driver libraries using `dlopen` (not if they just use `cudatoolkit`). A few have already been fixed but it is practically impossible to test all because most packages using CUDA are libraries/frameworks without a simple way to test.
Fixes#11434 if only Mesa or NVidia graphics drivers are used.
Previously, if you, for example, set
services.xserver.displayManager.sddm.enable, but forgot to set
services.xserver.enable, you would get an error message that looked like
this:
error: attribute 'display-manager' missing
Which was not particularly helpful.
Using assertions, we can make this message much better.
The default config of i3 provides a key binding to reload, so changes
take effect immediately:
```
bindsym $mod+Shift+c reload
```
Unfortunately the current module uses the store path of the `configFile`
option. So when I change the config in NixOS, a store path will be
created, but the current i3 process will continue to use the old one,
hence a restart of i3 is required currently.
This change links the config to `/etc/i3/config` and alters the X
startup script accordingly so after each rebuild, the config can be
reloaded.
I'm not 100% sure about the incompatibility lines,
but I believe it's better to discourage these anyway.
If you find better information, feel free to amend...
The 32-bit thing is completely GPU-agnostic, so I can't see why we had
it separately for proprietary drivers and missing for the rest.
We don't need gnome-bluetooth because its executables
path is already hardcoded into the contractor file, as that's
the only place it is needed.
Don't think we need gnome-power-manager either.
Also add programs like geary to removePackagesByName.
- Remove xdg-desktop-menu-dummy.menu kbuildsycoca5. Not sure why we
need it but it is a pretty big failure if it exists.
See issue #56176.
- plasma: clear ksycoca cache before building
This is needed to pick up on software removed since the last cache
update. Otherwise it hangs around as zombies forever (or until the
cache is cleared).
- Add the above + the icon cache cleanup to plasmaSetup
This will be run for the logged in user on each nixos-rebuild.
Unfortunately this only works if you are managing software through
nixos-rebuild (nix-env users need to run this manually, otherwise
log out and log back in).
