The test sporadically failed on hydra when a request was made
before the service was actually listening on its port.
Explicitly wait for the port to open.
Since matrix-synapse 0.33.0 underscores in server names are rejected
by server name validation, causing the test to fail:
valueError: Server name 'server_sqlite' contains invalid characters
Relevant upstream change:
546bc9e28b
- wait for node to listen before starting munin-cron
- increase timeout for munin-cron startup
- disable a failing plugin to remove irrelevant error message
This prevents issues when gitea adds new locales etc. And if they
change locale values in future versions. Or if you rollback to a
previous version of gitea it might be a good idea to use the previous
locale files.
This is a 277K (as of right now) addition that can greatly help in some
last recourse scenarios. The specific rEFInd setup will not be able to
boot the installer image, but this is not why it has been added. It has
been added to make use of its volumes scanning capabilities to boot
existing EFI images on the target computer, which is sometimes necessary
with buggy EFI. While is isn't NixOS's job to fix buggy EFI, shipping
this small bit with the installer will help the unlucky few.
Example scenario: two wildly different EFI implementation I have
encountered have fatal flaws in which they sometimes will lose all the
settings, this includes boot configuration. This is compounded by the
fact that the two specific and distinct implementation do not allow
manually adding ESP paths from their interface. The only recourse is to
let the EFI boot the default paths, EFI/boot/boot{platform}.efi, which
is not a default location used by the NixOS bootloaders. rEFInd is able
to scan the volumes and detect the existing efi bootloaders, and boot
them successfully.
Following up https://github.com/NixOS/nixpkgs/pull/23665
Bootable USB-drives are not limited to ISO-images, there can be "normal" MBR/GPT-partitioned disk connected via USB-rack.
Also, "uas" implies "usb-storage", so there is no need to mention both.
thermald has two modes: zero-config and manual. Sometimes it is useful
to manually configure thermald to achieve better thermal results or to give
thermald a hand when detecting possible cooling options.
I broke it:
in job ‘nixos.iso_graphical.x86_64-linux’:
The option `services.udisks2.enable' has conflicting definitions, in `/nix/store/bwcjw1ddj94q83vbbnq1nnrs5aisaw59-source/nixos/modules/profiles/installation-device.nix' and `/nix/store/bwcjw1ddj94q83vbbnq1nnrs5aisaw59-source/nixos/modules/services/x11/desktop-managers/plasma5.nix'.
And don't need to source the uevent files anymore either since $MAJOR
or $MINOR aren't used elsewhere.
[dezgeg: The reason these are no longer needed is that 0d27df280f
switched /tmp to a devtmpfs which automatically creates such device
nodes]
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
This bumps Hydra to the latest revision available. As Hydra doesn't have
a release model (and therefore no tags) ATM, the derivation will pin
against the actual git revision and the date of the commit in the
derivation name.
Additionally the following changes have been made:
* Dropped `postUnpack` phase. It is useful when working with the Hydra
source (and no dirty changes shall be used in `release.nix`, but is has
no use in `nixpkgs`).
* Added myself as maintainer to have more folks available in case of
future breakage.
* Implemented support for Nix 2.0 and `unstable` (currently 2.1):
Since 1672bcd230447f1ce0c3291950bdd9a662cee974 in NixOS/nix the
evaluator differentiates between `settings` and `evalSettings`.
Previously `restrictEval` in `hydra-eval-jobs.cc` has been set in
`settings`, this doesn't work anymore in Nix 2.1 and is therefore
incompatible to Nix 2.0 on an API level.
To resolve this, the flag `isGreaterNix20` parses the version string
of `pkgs.nix` and applies a patch if nix.version<=2.0.
Furthermore the Hydra build with Nix 2.1 requires `boost` as build input
which is not needed for Nix 2.0. To avoid unnecessary increase in the
closure size this library will only used as build input for
nix.version>2.0.
* Fixed the NixOS test for `hydra`:
disabled binary cache to allow sandbox builds (otherwise it would
query `cache.nixos.org` during the Hydra build inside the test).
Additionally the trivial.nix jobset required simplification (as done
in NixOS/hydra, e.g. tests/api-test.nix) as bash is not available in
the build sandbox as builder (even when adding pkgs.bash to
systemPackages).
The easiest workaround to confirm a the functionality of a jobset
without importing nixpkgs is to use the default shell /bin/sh which
is mounted from `pkgs.busybox` into the build env
(https://github.com/NixOS/nixpkgs/pull/44841#discussion_r209751972) in the
VM and a named pipe to create $out.
Closes#44044
This fixes an issue where setting both
`boot.loader.systemd-boot.editor` to `false` and
`boot.loader.systemd-boot.consoleMode` to any value would concatenate
the two configuration lines in the output, resulting in an invalid
`loader.conf`.
Since a9d69a74d6, the passphrase prompt
now no longer starts with "Enter passphrase for" but now it's just
"Passphrase for", which causes the luksroot installer test to fail.
I've tested this on a x86_64-linux machine and the test now succeeds.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @oxij, @samueldr
Issue: #29441
This allows the user to add `wpa_supplicant` config options not yet supported by Nix without having to write the entire `wpa_supplicant.conf` file manually.
Introduces an option `services.datadog-agent.extraIntegrations` that
can be set to include additional Datadog agent integrations from the
integrations-core repository.
Documentation and an example is provided with the change.
Relates to NixOS/nixpkgs#40399
Refactors the datadog-agent (i.e. V6) module to let users configure
arbitrary checks, not just a limited set, without having to resort to
linking the files manually and updating the systemd unit.
Checks are now configured via a `services.datadog-agent.checks` option
which takes an attribute set in which the keys refer directly to
Datadog check names, and the values are attribute sets representing
Datadog's configuration structure.
With this mechanism users can configure arbitrary integrations, for
example for the `ntp`-check, simply by saying:
services.datadog-agent.checks.ntp = {
init_config = null;
# ... other check configuration options as per Datadog
# documentation
};
The previous check-specific configuration options for non-default
checks have been removed. Disk & network check configuration options
have been kept rather than making them a `default`-value of the
`checks`-option because they will be overridden by user-configurations
in that case.
Relates to NixOS/nixpkgs#40399.
From reading the source I'm pretty sure it doesn't support multiple Yubikeys, hence
those options are useless.
Also, I'm pretty sure nobody actually uses this feature, because enabling it causes
extra utils' checks to fail (even before applying any patches of this branch).
As I don't have the hardware to test this, I'm too lazy to fix the utils, but
I did test that with extra utils checks commented out and Yubikey
enabled the resulting script still passes the syntax check.
Also reuse common cryptsetup invocation subexpressions.
- Passphrase reading is done via the shell now, not by cryptsetup.
This way the same passphrase can be reused between cryptsetup
invocations, which this module now tries to do by default (can be
disabled).
- Number of retries is now infinity, it makes no sense to make users
reboot when they fail to type in their passphrase.
Some modules of cloud-init can cope with a network not immediately
available (notably, the EC2 module), but some others won't retry if
network is not available (notably, the Cloudstack module).
network.target doesn't give much guarantee about the network
availability. Applications not able to start without a fully
configured network should be ordered after network-online.target.
Also see #44573 and #44524.
We override the ESP mount point in the config file /etc/fwupd/uefi.conf
(available since version 1.0.6), as it is set to a path in the nix store
during build time.
Tests are disabled as it needs /etc/os-release, which is not available
when building with sandboxing enabled.
