This creates a dependency cycle when used with boot.tmpOnTmpfs:
basic.target <- tmp.mount <- swap.target <- zram-init-dev0 <- basic.target
This same fix is done already for tmp.mount
Fixes https://github.com/NixOS/nixpkgs/issues/47474
- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
Although this can be added to `extraOptions` I figured that it makes
sense to add an option to explicitly promote this feature in our
documentation since most of the self-hosted gitea instances won't be
intended for common use I guess.
Also added a notice that this should be added after the initial deploy
as you have to register yourself using that feature unless the install
wizard is used.
See #49441 for an earlier attempt, which was subsequently reverted. I am
assuming that doubling the time will be sufficient if the machine is
overloaded since so many of the tests already pass at 5 minutes, while
still not holding back failures for needlessly long.
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
Nexus increased their default minimum disk space requirement to 4GB:
```
com.orientechnologies.orient.core.exception.OLowDiskSpaceException: Error occurred while executing a
write operation to database 'OSystem' due to limited free space on the disk (1823 MB). The database
is now working in read-only mode. Please close the database (or stop OrientDB), make room on your hard
drive and then reopen the database. The minimal required space is 4096 MB. Required space is now
set to 4096MB (you can change it by setting parameter storage.diskCache.diskFreeSpaceLimit) .
server# [ 72.560866] zqnav3mg7m6ixvdcacgj7p5ibijpibx5-unit-script-nexus-start[627]: DB name="OSystem"
```
Including the rest on the VM 8GB should be the most suitable solution.
As the installer test also takes 8GB of disk size this should still be
in an acceptable range.
cleanSource does not appear to work correctly in this case. The path
does not get coerced to a string, resulting in a dangling symlink
produced in channel.nix. Not sure why, but this
seems to fix it.
Fixes#51025.
/cc @elvishjericco
According to systemd-nspawn(1), --network-bridge implies --network-veth,
and --port option is supported only when private networking is enabled.
Fixes#52417.
Symlinking works for most plugins and themes, but Avada, for instance, fails to
understand the symlink, causing its file path stripping to fail. This results in
requests that look like:
https://example.com/wp-content//nix/store/...plugin/path/some-file.js
Since hard linking directories is not allowed, copying is the next best thing.
slab_nomerge may reduce surface somewhat
slub_debug is used to enable additional sanity checks and "red zones" around
allocations to detect read/writes beyond the allocated area, as well as
poisoning to overwrite free'd data.
The cost is yet more memory fragmentation ...
While at it (see previous commit), using attrNames in combination with
length is a bit verbose for checking whether the filtered attribute set
is empty, so let's just compare it against an empty attribute set.
Signed-off-by: aszlig <aszlig@nix.build>
When generating values for the services.nsd.zones attribute using values
from pkgs, we'll run into an infinite recursion because the nsd module
has a condition on the top-level definition of nixpkgs.config.
While it would work to push the definition a few levels down, it will
still only work if we don't use bind tools for generating zones.
As far as I could see, Python support for BIND seems to be only needed
for the dnssec-* tools, so instead of using nixpkgs.config, we now
directly override pkgs.bind instead of globally in nixpkgs.
To illustrate the problem with a small test case, instantiating the
following Nix expression from the nixpkgs source root will cause the
mentioned infinite recursion:
(import ./nixos {
configuration = { lib, pkgs, ... }: {
services.nsd.enable = true;
services.nsd.zones = import (pkgs.writeText "foo.nix" ''
{ "foo.".data = "xyz";
"foo.".dnssec = true;
}
'');
};
}).vm
With this change, generating zones via import-from-derivation is now
possible again.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @pngwjpgh
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
For the hardened profile disable symmetric multi threading. There seems to be
no *proven* method of exploiting cache sharing between threads on the same CPU
core, so this may be considered quite paranoid, considering the perf cost.
SMT can be controlled at runtime, however. This is in keeping with OpenBSD
defaults.
TODO: since SMT is left to be controlled at runtime, changing the option
definition should take effect on system activation. Write to
/sys/devices/system/cpu/smt/control
For the hardened profile enable flushing whenever the hypervisor enters the
guest, but otherwise leave at kernel default (conditional flushing as of
writing).
Introduces the option security.protectKernelImage that is intended to control
various mitigations to protect the integrity of the running kernel
image (i.e., prevent replacing it without rebooting).
This makes sense as a dedicated module as it is otherwise somewhat difficult
to override for hardened profile users who want e.g., hibernation to work.
The aim is to minimize surprises: when the user explicitly installs a
package in their configuration, it should override any package
implicitly installed by NixOS.
This, paired with the previous commit, ensures the channel won't be held
back from a kernel upgrade and a non-building sd image, while still
having a new-kernel variant available.
This is because it will not eval properly with `hydra-eval-jobs`.
```
$ ...hydra/result/bin/hydra-eval-jobs \
--arg nixpkgs '{ outPath = ./.; revCount = 123; shortRev = "4567"; }' \
-I "$PWD" \
nixos/release-combined.nix
```
It fails with:
```
Too many heap sections: Increase MAXHINCR or MAX_HEAP_SECTS
```
Use googleOsLogin for login instead.
This allows setting users.mutableUsers back to false, and to strip the
security.sudo.extraConfig.
security.sudo.enable is default anyhow, so we can remove that as well.
The OS Login package enables the following components:
AuthorizedKeysCommand to query valid SSH keys from the user's OS Login
profile during ssh authentication phase.
NSS Module to provide user and group information
PAM Module for the sshd service, providing authorization and
authentication support, allowing the system to use data stored in
Google Cloud IAM permissions to control both, the ability to log into
an instance, and to perform operations as root (sudo).
