This effectively disables nscd's built-in hosts cache, which turns out
to be erratic in some cases.
We only use nscd these days as a more ABI-neutral NSS dispatcher
mechanism.
Local caching should still be possible with local resolvers in
/etc/resolv.conf (via the `dns` NSS module), or without local resolvers
via systemd-networkd (via the `resolve` nss module)
We don't set enable-cache to no due to
https://github.com/NixOS/nixpkgs/pull/50316#discussion_r241035226.
Refactor the systemd service definition for the haproxy reverse proxy,
using the upstream systemd service definition. This allows the service
to be reloaded on changes, preserving existing server state, and adds
some hardening options.
The `networking.interfaces.<name?>.proxyARP` option previously mentioned it would also enable IPv6 forwarding and `proxy_ndp`.
However, the `proxy_ndp` option was never actually set (the non-existing `net.ipv6.conf.proxy_arp` sysctl was set
instead). In addition `proxy_ndp` also needs individual entries for each ip to proxy for.
Proxy ARP and Proxy NDP are two different concepts, and enabling the latter
should be a conscious decision.
This commit removes the broken NDP support, and disables explicitly
enabling IPv6 forwarding (which is the default in most cases anyways)
Fixes#62339.
This fixes the output of "hostname --fqdn" (previously the domain name
was not appended). Additionally it's now possible to use the FQDN.
This works by unconditionally adding two entries to /etc/hosts:
127.0.0.1 localhost
::1 localhost
These are the first two entries and therefore gethostbyaddr() will
always resolve "127.0.0.1" and "::1" back to "localhost" [0].
This works because nscd (or rather the nss-files module) returns the
first matching row from /etc/hosts (and ignores the rest).
The FQDN and hostname entries are appended later to /etc/hosts, e.g.:
127.0.0.2 nixos-unstable.test.tld nixos-unstable
::1 nixos-unstable.test.tld nixos-unstable
Note: We use 127.0.0.2 here to follow nss-myhostname (systemd) as close
as possible. This has the advantage that 127.0.0.2 can be resolved back
to the FQDN but also the drawback that applications that only listen to
127.0.0.1 (and not additionally ::1) cannot be reached via the FQDN.
If you would like this to work you can use the following configuration:
```nix
networking.hosts."127.0.0.1" = [
"${config.networking.hostName}.${config.networking.domain}"
config.networking.hostName
];
```
Therefore gethostbyname() resolves "nixos-unstable" to the FQDN
(canonical name): "nixos-unstable.test.tld".
Advantages over the previous behaviour:
- The FQDN will now also be resolved correctly (the entry was missing).
- E.g. the command "hostname --fqdn" will now work as expected.
Drawbacks:
- Overrides entries form the DNS (an issue if e.g. $FQDN should resolve
to the public IP address instead of 127.0.0.1)
- Note: This was already partly an issue as there's an entry for
$HOSTNAME (without the domain part) that resolves to
127.0.1.1 (!= 127.0.0.1).
- Unknown (could potentially cause other unexpected issues, but special
care was taken).
[0]: Some applications do apparently depend on this behaviour (see
c578924) and this is typically the expected behaviour.
Co-authored-by: Florian Klink <flokli@flokli.de>
- Update the default pause image
- Set the cgroup manager to systemd
- Enable `manage_ns_lifecycle` instead of the deprecated
`manage_network_ns_lifecycle` option
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
- E already comes with a default icon theme
- There are already the gtk default Adwaita themes for gtk2, gtk3 and icons
- Remove gnome-icon-theme (from old gtk2)
- Remove tango-icon-theme
- Remove xauth (used by kdesu), as kdesu is not a componnent of E. If
really needed it should be added in the system configuration.
https://github.com/NixOS/nixpkgs/pull/88492 flipped some references to
systemctl from config.systemd.package to /run/current-system/systemd/,
which udevRules obviously isn't able resolve.
If we encounter such references, replace them with
config.systemd.package before doing the check.
The `network-link-${i.name}` units raced with other things trying to
configure the interface, or ran before the interface was available.
Instead of running our own set of shell scripts on boot, and hoping
they're executed at the right time, we can make use of udev to configure
the interface *while they appear*, by providing `.link` files in
/etc/systemd/network/*.link to set MACAddress and MTUBytes.
This doesn't require networkd to be enabled, and is populated properly
on non-networkd systems since
https://github.com/NixOS/nixpkgs/pull/82941.
This continues clean-up work done in
https://github.com/NixOS/nixpkgs/pull/85170 for the scripted networking
stack.
The only leftover part of the `network-link-${i.name}` unit (bringing
the interface up) is moved to the beginning of the
`network-addresses-${i.name}` unit.
Fixes: https://github.com/NixOS/nixpkgs/issues/74471
Closes: https://github.com/NixOS/nixpkgs/pull/87116
it does happen that `dnscrypt-proxy` exit when it is unable to
synchronise its resolvers metadata on startup. this can happen due
to network connectivity issues for example. not restarting it automatically
means no dns resolution will work until a manual restart is performed.
Favor the configuration in "configFile" over "config" to allow
"configFile" to override "config" without a system rebuild.
Add a "persistentKeys" option to generate keys and addresses that
persist across service restarts. This is useful for self-configuring
boot media.
This ensures a correct DBUS_SESSION_BUS_ADDRESS environment variable
is set and imported into the systemd user environment.
Previously this would refer to a non-existing path preventing commands
interacting with the systemd manager from working.
Closes#87502
Also, remove the dangling systemd.services.systemd-binfmt.wants = [
"proc-sys-fs-binfmt_misc.mount" ]; in systemd.nix.
If boot.binfmt.registrations != {}, systemd will install
proc-sys-fs-binfmt_misc.automount, which will auto-mount
`/proc/sys/fs/binfmt_misc` as soon as systemd-binfmt tries to access it.
Fixes https://github.com/NixOS/nixpkgs/issues/87687
Fixes https://github.com/NixOS/nixops/issues/574
The 6.0 changelog notes that systemd support was rewritten. The effects
of that seem to be twofold:
* Redis will silently fail to sd_notify if not built with libsystemd,
breaking our unit configuration.
* It also appears to misbehave if told to daemonize when running under
systemd -- note that upstream's sample unit configuration does not
daemonize:
https://github.com/antirez/redis/blob/unstable/utils/systemd-redis_server.service
Currently, sudo doesn't work in a NixOS container running inside a Nix
build, because Nix's seccomp filter doesn't allow setuid programs. In
any case, runuser is a bit lower-overhead than sudo.
A disabled nscd breaks nss module loading on NixOS, and systemd without
its nss modules doesn't really work either - instead of silently
disabling its nss modules if nscd is disabled, let the assertion in
nsswitch handle this.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the systemd module in
c0995d22ee, it didn't get split
appropriately.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the google-oslogin module in
4b71b6f8fa, it didn't get split
appropriately.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the sss module in
edddc7c82a, it didn't get split
appropriately.
The configured mbuffer path will be called on both the source and target
system. If you use pkgs.mbuffer from the source host and the target host
does not have this exact derivation, you will get a broken pipe when
sending snapshots. This is the case when transferring to a non-NixOS
system or to a host with a different mbuffer version.
In /etc/doas.conf, the last-matched rule will override all
previously-matched rules. Thus, make the default rule show up first (but
still allow some wiggle room for a user to `mkBefore` it), before any
user-defined rules.
the options should not be set as we already change user with service
file, man mpd.conf says "Do not use this option if you start MPD as an
unprivileged user"
The group option actually is not documented at all anymore and probably
no longer exists.
These options get in the way of setting up confinement for the service,
as it would otherwise be pretty straightforward to setup, but even if
mpd is not root it would check the user exists within the chroot which
is more work (need to get nss working):
systemd.services.mpd = {
serviceConfig.BindPaths = [
# mpd state dir
"/var/lib/mpd"
# notify systemd service started up
"/run/systemd/notify"
];
serviceConfig.BindReadOnlyPaths = [
"/path/to/music:/var/lib/mpd/music"
];
# ProtectSystem is not compatible with confinement
serviceConfig.ProtectSystem = lib.mkForce false;
confinement = {
enable = true;
binSh = null;
mode = "chroot-only";
};
};
Systemd ProtectSystem is incompatible with the chroot we make
for confinement. The options is redundant with what we do anyway
so warn if it had been set and advise to disable it.
Merges: https://github.com/NixOS/nixpkgs/pull/87420
This will make dbus socket activation for it work
When `systemd-resolved` is restarted; this would lead to unavailability
of DNS lookups. You're supposed to use DBUS socket activation to buffer
resolved requests; such that restarts happen without downtime
By default, postgres prefixes each log line with a timestamp. On NixOS
logs are written to journal anyway, so they include an external
timestamp, so the timestamp ends up being printed twice, which clutters
the log.
* Add a module option to change the log prefix.
* Set it to upstream default sans timestamp.
'nix build' is an experimental command so we shouldn't use it
yet. (nixos-rebuild also uses 'nix', but only when using flakes, which
are themselves an experimental feature.)
This reverts commits 9d0de0dc57,
27d2857a99. 'nix ping-store' is an
experimental command so it doesn't work in Nix 2.4 unless you set
'experimental-features = nix-command' in nix.conf.
This seems to have worked in 15f105d41f (5
months ago) but broke somewhere in the meantime.
The current module doesn't seem to be underdocumented and might need a
serious refactor. It requires quite some hacks to get it to work (see
https://github.com/NixOS/nixpkgs/issues/86305#issuecomment-621129942),
or how the ldap.nix test used systemd.services.openldap.preStart and
made quite some assumptions on internals.
Mic92 agreed on being added as a maintainer for the module, as he uses
it a lot and can possibly fix eventual breakages. For the most basic
startup breakages, the remaining openldap.nix test might suffice.
`doas` is a lighter alternative to `sudo` that "provide[s] 95% of the
features of `sudo` with a fraction of the codebase" [1]. I prefer it to
`sudo`, so I figured I would add a NixOS module in order for it to be
easier to use. The module is based off of the existing `sudo` module.
[1] https://github.com/Duncaen/OpenDoas
- Use floating points instead of strings, which Nix now supports
- Make the type of picom.settings option recursive
- Add a meaningful description of both the option and its type
Add extraConfig option for the muc submodule.
Also move the global extraConfig before all components and
virtualhosts, because the manual states:
The configuration is divided into two parts. The first part is known as
the "global" section. All settings here apply to the whole server, and
are the default for all virtual hosts.
The second half of the file is a series of VirtualHost and Component
definitions. Settings under each VirtualHost or Component line apply
only to that host.
Before, if at least one muc was defined, or uploadHttp enabled, the
global extraConfig would end up after "muc" or "http_upload" component
making it apply to that component only and not globally.
We add a Prosody entry to the NixOS manual showing how to setup a
basic XEP-0423 compliant Prosody service. This example also showcase
how to generate the associated ACME certificates.
Note: The <programlisting> body might look poorly indented, but trust
me, it's necessary. If we try to increase their indentation level, the
HTML output will end up containing a lot of unecesseray heading spaces
breaking the formatting...
This reverts commit 764c8203b8.
While this is desireable in principle, some of our modules and services
fail during service startup if no network is available don't currently
properly set Wants=network-online.target.
If nothing pulls in this target anymore, systemd won't try to reach it.
We have many VM tests waiting for `network-online.target`, and after
764c8203b8 fail with the following error
message:
```
error: unit "network-online.target" is inactive and there are no pending jobs
```
Most likely, test scripts shouldn't wait for `network-online.target` in
first place (as `network-online.target` says nothing about whether a
service has been started), but instead, the script should wait for the
network ports of the corresponding service to be open.
Let's revert this for now, and re-apply in a draft PR, fixing the tests
before merging it back in.
The output file is found and handled by thelounge itself [1], leaving
the user free to override THELOUNGE_HOME in the environment if they
choose, but having a sensible default to make `thelounge` generally
usable in most cases.
This solution follows discussion on #70318.
[1] 9ef5c6c67e/src/command-line/utils.js (L56)
This follows upstreams change in documentation. While the `[DHCP]`
section might still work it is undocumented and we should probably not
be using it anymore. Users can just upgrade to the new option without
much hassle.
I had to create a bit of custom module deprecation code since the usual
approach doesn't support wildcards in the path.
You can now specify option for the `[DHCPv6]` section with
`systemd.network.<name>.dhcpV6Config.…`. Previously you could only use
the combined legacy DHCP configuration.
Systemd upstream has deprecated CriticalConnection with v244 in favor of
KeepConnection as that seems to be more flexible:
The CriticalConnection= setting in .network files is now deprecated,
and replaced by a new KeepConfiguration= setting which allows more
detailed configuration of the IP configuration to keep in place.
