* ultrastardx-beta: init at 1.3.5
* libbass, libbass_fx: init at 24
* ultrastar-creator: init at 2017-04-12
* buildSupport/plugins.nix: add diffPlugins
Helper function to compare expected plugin lists to the found plugins.
* ultrastar-manager: init at 2017-05-24
The plugins are built in their own derivations, speeding up (re-)compilation.
The `diffPlugins` function from `beets` is reused to test for changes in the
plugin list on updates.
* beets: switch to diffPlugins
The function is basically just extracted for better reusability.
This value is require to get c++ std include path for libclang based tools (vim plugins in my case).
I currently extract it this with this rather command:
```
eval echo $(nix-instantiate --eval --expr 'with (import <nixpkgs>) {}; clang.default_cxx_stdlib_compile')
```
it did not trigger any recompilation on my system.
`SSL_CERT_FILE` has been replaced with `NIX_SSL_CERT_FILE`.
Before this change using `fetchdarcs` resulted in an error message like:
```
Identifying repository http://hub.darcs.net/scravy/easyplot inventory
darcs failed: Not a repository: http://hub.darcs.net/scravy/easyplot (Peer certificate cannot be authenticated with given CA certificates)
HINT: Do you have the right URI for the repository?
builder for ‘/nix/store/imyvcs6lvb5yva66krc5wk39931sam8v-fetchdarcs.drv’ failed with exit code 2
```
I was getting the following error building tide from Melpa:
nix-build -E '(import <nixpkgs> {}).emacs25WithPackages (p: [p.melpaPackages.tide])'
File tide-20170509.1134.tar is large (10.2M), really open? (y or n) Error reading from stdin
builder for ‘/nix/store/gs9ik7yf8iilsikkfing74i70m0diax3-emacs-tide-20170509.1134.drv’ failed with exit code 255
cannot build derivation ‘/nix/store/m3p080aani4rw82llp8nqk93cw2nvirk-emacs-with-packages-25.2.drv’: 1 dependencies couldn't be built
Solution was to disable the large file warning threshold when
installing packages.
This still causes some uncached rebuilds, but master(!) and staging
move too fast forward rebuild-wise, so Hydra might never catch up.
(There are also other occasional problems.)
Therefore I merge at this point where the rebuild isn't that bad.
We need to make sure that `$revs` ends with a space, since files must always
end with newlines. The previous code ignored the last entry in `$revs`, because
read already returns non-zero exit code for the last entry, as it does not end
with a space.
This change fixes several defects in the way `wrapGAppsHook` selected
the executable to wrap.
Previously, it would wrap any top-level files in the target `/bin` and
`/libexec` directories, including directories and non-executable
files. In addition, it failed to wrap files in subdirectories.
Now, it uses `find` to iterate over these directory hierarchies,
selecting only executable files for wrapping.
This change fixes several defects in the way `wrapGAppsHook` selected
the executable to wrap.
Previously, it would wrap any top-level files in the target `/bin` and
`/libexec` directories, including directories and non-executable
files. In addition, it failed to wrap files in subdirectories.
Now, it uses `find` to iterate over these directory hierarchies,
selecting only executable files for wrapping.
When not using sandboxing, /usr/share/git-core/templates may leak into the
nix build through the libgit2 hardcoded default template search path. We now
explictly set the templatedir to avoid this problem.
See https://github.com/bennofs/nix-index/issues/2#issuecomment-296268983 for
an example case of nondeterminism.
This typo was likely introduced by copy-pasting the error message from elsewhere and forgetting to change the text, during the MD5 deprecation process (#4491).
This patch fixes file modification times to $SOURCE_DATE_EPOCH, and
ensures that files originating from the store are owned by root:root.
Both changes improve reproducibility, and the latter allows proper
building on a host where the store is owned by a non-root user.
Every Rust derivation used to emit a warning like the following:
```
setting SOURCE_DATE_EPOCH to timestamp 1490877042 of file cargo-6e0c18c/Cargo.lock
warning: file cargo-6e0c18c/Cargo.lock may be generated; SOURCE_DATE_EPOCH may be non-deterministic
```
The reason is that the dependencies are copied without preserving
timestamps. Changing the build script to timestamp-preserving copy
removes the warning.
This is a flag that disables subversion keyword substitution.
Keyword substitution inserts metadata into the files being checked
out, and is therefore somewhat at odds with build reproducibility.
In particular, it can become a problem if you're trying to switch
between svn and a git export of the same thing (keyword substitutions
are normally not exported into git).
This allows for a less blanket approach than nuke-refs, targetting specific
references that we know we don't want rather than all references that we don't
know we want.
Because of bash 4.4 the semantics GLOBIGNORE changed.
This resulted in already compressed manpages to be compressed twice.
Also be careful about symlinks to fix#21777, e.g. the ledger example.
See
8214bb953d
for the cargo commit which deprecated the registry.index key, and
implements this as a replacement. This gets rid of the error message
warning: custom registry support via the `registry.index` configuration is being removed, this functionality will not work in the future
This script is not needed anymore since "nix-prefetch-url --unpack
<url>" and "nix-prefetch-url -A foo.src" (where "foo.src" is a
fetchzip / fetchFromGitHub call) work fine.
This reverts commit 3d9017602b.
This didn't quite work as I had expected ... While it seemed okay at
first, it fails to propagate all the attributes it used to (notably
features). I'll revisit this later but reverting for now.
This adds a `dhallToNix` utility which compiles expression from the Dhall
configuration language to Nix using Nix's support for "import from derivation".
The main motivation of this compiler is to allow users to carve out small typed
subsets of Nix projects. Everything in the Dhall language (except `Double`s)
can be translated to Nix in this way, including functions.
This is required for Aarch64 since a lot of source tarballs ship with
outdated configure scripts that don't recognize aarch64. Simply
replacing the config.guess and config.sub with new versions from
upstream makes them build again.
This same approach is used by at least Buildroot and Fedora. In
principle this could be enabled for all architectures but
conditionalizing this on aarch64 avoids a mass rebuild on x86.
To achieve reproducible results, `cpio` archive members are added in
sorted order and inodes renumbered.
The `cpio-clean.pl` script is made obsolete by setting mtimes via
`touch` & using `cpio --reproducible`. Suggested by @dezgeg in
https://github.com/NixOS/nixpkgs/pull/21273#issuecomment-268116605.
Note that using `--reproducible` means that initial ramdisk creation now
requires at least `cpio` version 2.12 (released in 2015).
Deprecation warnings should not be used in Nixpkgs because they spam
innocent "nix-env -qa" users with (in this case) dozens of messages
that they can't do anything about.
This also reverts commit 2ca8833383.
I believe this reduces surprises and is actually simpler semantically.
This is important e.g. for relative symlinks when moving both source
and target - now the order of moving won't matter.
Fixes#20723 (a particular instance of the surprise).
This makes the response file handling more consistent with GCC.
For example, a reponse file may contain:
"-Wl,$ORIGIN"
GCC will treat this as a double quoted string and not expand the
variable reference. Previously, cc-wrapper would expand the variable
in the same was as if the string was provided on the command line.
This commit extends fetchFromGitHub with ability to fetch GitHub
repositories with submodules, so we can use the function consistently
with all GitHub repositories.
Note it doesn't change the previous behavior.
Include files are typically in the libc package's `dev` output but previously `-isystem` was looking in `out`, resulting in my cross-compilation environment not finding its include files.
The motivation for this change is the following: As gnu-netcat,
e. g. does not support ipv6, it is not suitable as default netcat.
This commit also fixes all obvious build issues caused by this change.
This is a temporary work-around to fix using grsecurity on NixOS with
the new kernelPackages/kernelPatches machinery.
For whatever reason, when `security.grsecurity.enable = true`, the grsec
patch ends up being applied twice, causing the kernel build to fail.
Until the root cause of this is identified, we hack around it by simply
pruning duplicate patches in the grsec kernel builder.
Closes#19698
`stripHash` documentation states that it prints out the stripped name to
the stdout, but the function stored the value in `strippedName`
instead.
Basically all usages did something like
`$(stripHash $foo | echo $strippedName)` which is just braindamaged.
Fixed the implementation and all invocations.
extraFlagsArray should not be exposed outside of `makeWrapper`, it
should only be possible to set it inside a script supplied via the
`--run` argument.
This ensures that most "trivial" derivations used to build NixOS
configurations no longer depend on GCC. For commands that do invoke
gcc, there is runCommandCC.
This is a standard environment that doesn't contain a C/C++
compiler. This is mostly to prevent trivial builders like runCommand
and substituteAll from pulling in gcc for simple configuration changes
on NixOS.
When building an image with multiple layers, files
already included in an underlying layer are supposed to
be excluded from the current layer. However, some subtleties
in the way filepaths are compared seem to be blocking this.
Specifically:
* tar generates relative filepaths with directories ending in '/'
* find generates absolute filepaths with no trailing slashes on directories
That is, paths extracted from the underlying tarball look like:
nix/store/.../foobar/
whereas the layer being generated uses paths like:
/nix/store/.../foobar
This patch modifies the output of "tar -t" to match the latter format.
They now go to devman, devdoc, or $outputMan, in that order. This is
to prevent cases such as the man-pages package quietly losing its
section 3 pages.
This builds elisp to setup an emacs buffer with the packages given
available. See shlevy/nix-buffer for more information.
Currently only modifies $PATH.
This one was already merged into release-16.09, so let's not have the
stable branch is ahead of master and confuse things. In addition to
that, currently we have an odd situation that master has less things
actually finished building than in staging.
Conflicts:
pkgs/data/documentation/man-pages/default.nix
This was one of the ways to build packages, we are trying
hard to minimize different ways so it's easier for newcomers
to learn only one way.
This also:
- removes texLive (old), fixes#14807
- removed upstream-updater, if that code is still used it should be in
separate repo
- changes a few packages like gitit/mit-scheme to use new texlive
Previously, features.grsecurity wasn't actually set due to a bug in the
grsec builder. We now rely on the generic kernel builder to set features
from kernelPatches.
This reverts commit da68127737, reversing
changes made to 2ba494b728.
These changes are reverted because they cause an incompatibility which
they should not.
"emacsWrapper" replaces emacsWithPackages. In addition to "packagesFun",
emacsWrapper has an optional variable called "execStart". execStart can
be used to append elisp to the default site-start.el script. This is
useful for providing a way to load a user's .emacs.d/init.el
file. "emacsWithPackages" is implemented with emacsWrapper for
convenience and compatability.
