The output of ./configure shows all modules/plugins, both enabled and
disabled. With this info we can finally build the _complete_ list of
modules. We were missing these:
mod_authn_gssapi
mod_authn_ldap
mod_geoip
(I hit this as I was building lighttpd with ldap support and the NixOS
module said ldap was unsupported, due to these missing entries in
allKnownModules.)
* Safer defaults for immutable znc config
I just lost all the options I configured in ZNC, because the mutable config was overwritten.
I accept any suggestions on the way to implement this, but overwriting a mutable config by default seems weird. If we want to do this, we should ensure that ZNC does not allow to edit the config via the webmin when cfg.mutable is false.
* Do not backup old config files.
There seems to be little need for backups if mutable becomes a voluntary opt-out.
* fixup
The current `remotes` option is a string option containing nullmailer remote
definitions. However, those definitions may contain secret credentials and
should therefore not be put world-readable in the nix store.
I added a `remotesFile` option, which allows to specify a path to the remotes
definition file instead. This way, the definitions can be kept outside of the
nix store with more secure file permissions.
We now wait for dhcpcd to acquire a lease but dhcpcd is restarted on
system activation. As wpa_supplicant is stopped while dhcpcd is
restarting a significant delay is introduced on systems with wireless
network connections only. This changes the wpa_supplicant service to
also be restarted together with dhcpcd in case both services were
changed.
The current version is broken:
- there's no `openFirewall` attribute directly in the `cfg` set
- the `port` option is an attribute of the `confOptions` set
I used the proper attribute for the firewall port and moved the `openFirewall`
option directly up to the `services.znc` set, as it's rather a general option
for the whole service than a znc-specific option (which are located inside the
`confOptions` set).
This introduces dependency cycles.
A network file system to be running is not required for a network
connection to be available.
19759cfeab (commitcomment-22044519)
* Grants enough privileges to the configured user so that it can run
mysqldump.
* Adds a nixos test.
* Use systemd timers instead of a cronjob (by @fadenb).
* Creates a new user for backups by default, instead of using mysql
user.
* Ensures that backup user has write permissions on backup location.
* Write backup to a temporary file before renaming so that a failed
backup won't overwrite the previous backup, and so that the backup
location will never contain a partial backup.
Breaking changes:
* Renamed period to calendar to reflect the change in how to
configure the backup time.
* A failed backup will no longer result in cron sending an e-mail --
users' monitoring systems must be updated.
Resolves#24728
Spamassassin expects its system-wide configuration at /etc/spamassassin, and
some user tools (like sa-learn) need to read those configuration files.
Therefore, we provide a symlink from /etc/spamassassin to the appropriate Nix
store path to make sure those tools work without the user having to pass an
elaborate --siteconfig path that, potentially, changes every time the system
updates.
Fixes https://github.com/NixOS/nixpkgs/issues/29414.
Sometimes (especially in the default route case) it is required to NOT
add routes for all allowed IP ranges. One might run it's own custom
routing on-top of wireguard and only use the wireguard addresses to
exchange prefixes with the remote host.
* gnome3: only maintain single GNOME 3 package set
GNOME 3 was split into 3.10 and 3.12 in #2694. Unfortunately, we barely have the resources
to update a single version of GNOME. Maintaining multiple versions just does not make sense.
Additionally, it makes viewing history using most Git tools bothersome.
This commit renames `pkgs/desktops/gnome-3/3.24` to `pkgs/desktops/gnome-3`, removes
the config variable for choosing packageset (`environment.gnome3.packageSet`), updates
the hint in maintainer script, and removes the `gnome3_24` derivation from `all-packages.nix`.
Closes: #29329
* maintainers/scripts/gnome: Use fixed GNOME 3 directory
Since we now allow only a single GNOME 3 package set, specifying
the working directory is not necessary.
This commit sets the directory to `pkgs/desktops/gnome-3`.
- add flannel support
- remove deprecated authorizationRBACSuperAdmin option
- rename from deprecated poratalNet to serviceClusterIpRange
- add nodeIp option for kubelet
- kubelet, add br_netfilter to kernelModules
- enable firewall by default
- enable dns by default on node and on master
- disable iptables for docker by default on nodes
- dns, restart on failure
- update tests
and other minor changes
1. The chmod 400 with the preset cookie prevented restarts, as
on the second boot it would fail to write to the cookie. Oops.
2. As far as I can tell, sasl logs were disabled because of the
following error:
{error,{cannot_log_to_tty,sasl_report_tty_h,not_installed}}
Not because we actually wanted to disable them. This meant the
management plugin wasn't usable due to a bug set to be fixed in
3.7.0.
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
This reverts commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.
(cherry picked from commit 23a021d12e8f939cd0bfddb1c7adeb125028c1e3)
The getty@.service unit already has an ExecStart so we cannot simply set a new
one in order to override it or we will get this error:
systemd[1]: getty@tty1.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Instead "reset" ExecStart by setting it to empty which is the systemd way of
doing it.
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.
The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.
This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.
Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.
(cherry picked from commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6)
This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
Previously services depending on network-online.target would wait until
dhcpcd times out if it was enabled and a static network address
configuration was used. Setting the default gateway statically is enough
for the networking to be considered online.
This also adjusts the relevant networking tests to wait for
network-online.target instead of just network.target.
If neither database.password or database.passwordFile were provided,
it would try and fail to coerce null to a string.
This fixes the situation where there is no password for the database.
Resolves#27950
This option got introduced in 7904499542
and it didn't check whether mailUser and mailGroup are null, which they
are by default.
Now we're only creating the user if createMailUser is set in conjunction
with mailUser and the group if mailGroup is set as well.
I've added a NixOS VM test so that we can verify whether dovecot works
without any additional options set, so it serves as a regression test
for issue #29466 and other issues that might come up with future changes
to the Dovecot service.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #29466
Cc: @qknight, @abbradar, @ixmatus, @siddharthist
For various reasons, big Nix attrsets look ugly in the generated manual
page[1]. Use literalExample to fix it.
[1] Quotes around attribute names are lost, newlines inside multi-line
strings are shown as '\n' and attrs written on multiple lines are joined
into one.
It doesn't look good when the initial admin user is named
"<hash>-gitolite-admin" and the key stored as
"<hash>-gitolite-admin.pub". Instead, make it simply "gitolite-admin"
and "gitolite-admin.pub".
* prometheus-collectd-exporter service: init module
Supports JSON and binary (optional) protocol
of collectd.
* nixos/prometheus-collectd-exporter: submodule is not needed for collectdBinary
Update physlock to a more current version which supports PAM and
systemd-logind. Amongst others, this should work now with the slim
login manager without any additional configuration, because it does
not rely on the utmp mechanism anymore.
I realize that advanced users like to configure services with Nix
attrsets, but I don't think we should remove the option to use the
(configuration) language provided by upstream.
When keys get refreshed a folder with the permissions of the root user
get created in the home directory of the user dnscrypt-wrapper. This
prevents the service from restarting.
In addition to that the parameters of dnscrypt-wrapper have
changed in upstream and in the newly packaged software.
I missed this in 799435b7ca.
This time I used "git grep -F pythonPackages.deluge" just to be sure :-)
Thanks a lot to @roconnor for spotting this.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: @roconnor
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).
The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).
I wrote the patch. (I believe it is NixOS specific.)
Regression introduced by fa5e343242.
The deluge package no longer resides in pythonPackages but now is a
top-level package.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @grantwwu, @fpletz
previous mkDefault did not work as expected,
as it did not overwrite the original submodule's defaults when the user
did not specify any custom options at all.
if the nginx option is used.
Noted that either webServerUser or nginx option is mandatory.
Also introduce an assertion if both are not set,
and a warning if both are set.
Resolves#27704.
instead of redeclaring part of the options. Backward-compatible change.
This gives the same flexibility to the user as nginx itself.
This also resolves the piwik module break from nginx' enableSSL introduction from #27426.
Previously, if proxy_set_header would be used in an extraConfig of
a location, the headers defined in the http block by
recommendedProxySettings would be cleared. As this is not the intended
behaviour, these settings are now included from a separate file if
needed.
Additional CUPS drivers can be added via "services.printing.drivers" but
Gutenprint was an exception. It was possible to add a Gutenprint
derivation to that list and it would work at first but unlike the other
drivers Gutenprint requires a script to be run after each update or any
attempt to print something would simply fail and an error would show up
in the jobs queue (http://localhost:631/jobs/):
"The PPD version (5.2.11) is not compatible with Gutenprint 5.2.13.
Please run
`/nix/store/7762kpyhfkcgmr3q81v1bbyy0bjhym80-gutenprint-5.2.13/sbin/cups-genppdupdate'
as administrator."
This is due to state in "/var/lib/cups/ppd" and one would need to run
"/nix/store/.../bin/cups-genppdupdate -p /var/lib/cups/ppd" manually.
The alternative was to enable the following option:
"services.printing.gutenprint" but this had two disadvantages:
1) It is an exception that one could be unaware of or that could
potentially cause some confusion.
2) One couldn't use a customized Gutenprint derivation in
"services.printing.drivers" but would instead have to overwrite
"pkgs.gutenprint".
This new approach simply detects a Gutenprint derivation in
"services.printing.gutenprint" by checking if the meta set of a
derivation contains "isGutenprint = true". Therefore no special
exception for Gutenprint would be required and it could easily be
applied to other drivers if they would require such a script to be run.
This is a squash commit of the joint work from:
* Jan Tojnar (@jtojnar)
* Linus Heckemann (@lheckemann)
* Ryan Mulligan (@ryantm)
* romildo (@romildo)
* Tom Hunger (@teh)
* nixos/usbguard: create package and module
No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)
* nixos/usbguard: remove extra packages
Users can override this by themselves.
* nixos/usbguard: add maintainer and fix style
There was no documentation for the "config" option, and it wasn't quite
clear whether it was supposed to be a file, a string, or what. This
commit removes that ambiguity.
