The current module assumes use of iptables and breaks if nftables is
used instead.
This change configures the correct backend based on the
config.networking.nftables.enable setting.
Aligned systemd service config with the definition in the upstream repo:
https://github.com/Irqbalance/irqbalance/blob/master/misc/irqbalance.service#L7.
Other than adding some level of sandboxing it also fixes the "Daemon
couldn't be bound to the file-based socket." warning reported on
irqbalance startup due to the fact that the "/run/irqbalance" directory
didn't exist. The "RuntimeDirectory" property makes sure it gets
created. The aforementioned warning didn't cause any problems I could
spot though.
I have verified that both `irqbalance` as well as `irqbalance-ui` work
fine with this new systemd service config.
Previously if ~/.background-image wasn't present, the background would
be set to black, which would override what the user could
set in e.g. services.xserver.windowManager.i3.extraSessionCommands
According to https://repology.org/repository/nix_unstable/problems, we have a
lot of packages that have http links that redirect to https as their homepage.
This commit updates all these packages to use the https links as their
homepage.
The following script was used to make these updates:
```
curl https://repology.org/api/v1/repository/nix_unstable/problems \
| jq '.[] | .problem' -r \
| rg 'Homepage link "(.+)" is a permanent redirect to "(.+)" and should be updated' --replace 's@$1@$2@' \
| sort | uniq > script.sed
find -name '*.nix' | xargs -P4 -- sed -f script.sed -i
```
* nixos/buildkite: drop user option
This reverts 8c6b1c3eaa.
Turns out, buildkite-agent has logic to write .ssh/known_hosts files and
only really works when $HOME and the user homedir are in sync.
On top of that, we provision ssh keys in /var/lib/buildkite-agent, which
doesn't work if that other users' homedir points elsewhere (we can cheat
by setting $HOME, but then getent and $HOME provide conflicting
results).
So after all, it's better to only run the system-wide buildkite agent as
the "buildkite-agent" user only - if one wants to run buildkite as
different users, systemd user services might be a better fit.
* nixosTests.buildkite-agent: add node with separate user and no ssh key
There is no need to stop/start the unit when the machine is online or
offline.
This should fix the shutdown locking issues.
nixos zerotier: sometimes it doesn't shutdown
On numerous occasions I have seen users mistake this
module as libinput because it being called "multitouch"
and them being unaware that the actually module they want
is libinput. They then run into several decrepit bugs due
to the completely out-of-date nature of the underlying package.
The underlying package hasn't been changed to an up-to-date
fork in a period of 8 years. I don't consider this to be production quality.
However, I'm not opposed for the module being readded to NixOS
with new packaging, and a better name.
Before c9214c394b and
9d396d2e42 if .git is symlink the version
would gracefully default to no git revision. With those changes an
exception is thrown instead.
This introduces a new function `pathIsGitRepo` that checks if
`commitIdFromGitRepo` fails without error so we don't have to
reimplement this logic again and can fail gracefully.
Some things were provided by default, some by systemd unit and some
were just miraculously working. This turns them into explicit
dependencies of the package itself, making everything properly
overrideable.
+ providing glibcLocales fixes elixir compile warnings
+ providing systemd dependency allows rabbit to use systemctl for unit
activation check instead of falling back to sleep. This was seen as
a warning during startup.
As of 2020-01-09, way-cooler is officially dead:
http://way-cooler.org/blog/2020/01/09/way-cooler-post-mortem.html
hence, remove the package and the module.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
docs/release-notes: remove way-cooler
way-cooler: show warnings about removal
Apply suggestions from code review
Co-Authored-By: worldofpeace <worldofpeace@protonmail.ch>
way-cooler: add suggestion by @Infinisil
The php installer creates a random one, but we bypass it, so we have
to create one ourselves.
This should be backward compatible as encryption is used for session
cookies only: users at the time of the upgrade will be logged out but
nothing more.
259b7fa065/config/config.inc.php.sample (L73)
If the database is local, use postgres peer authentication.
Otherwise, use a password file.
Leave database initialisation to postgresql.ensure*.
Leave /var/lib/roundcube creation to systemd.
Run php upgrade script as unpriviledged user.
This gets passed to BUILDKITE_SHELL, which will specify the shell being
used to executes script in.
Defaults to `${pkgs.bash}/bin/bash -e -c`, matching how buildkite
behaves on other distros.
SSH public keys aren't needed to clone private repos, and if we only
need to configure a single attribute, there's no need for the "openssh"
attrset anymore.
This applies [hydra PR #432](https://github.com/NixOS/hydra/pull/432)
to the NixOS module in nixpkgs:
```
commit 4efd078977e5ea20e1104783efc324cba11690bc
Author: Bas van Dijk <v.dijk.bas@gmail.com>
Date: Sun Dec 11 15:35:38 2016 +0100
Only set buildMachinesFiles when nix.buildMachines is defined
```
The following commit from 2016 in hydra removed the `--option
build-use-substitutes` from the hydra-queue-runner service:
```
commit ee2e9f5335c8c0288c102975b506f6b275793cfe
Author: Eelco Dolstra <edolstra@gmail.com>
Date: Fri Oct 7 20:23:05 2016 +0200
Update to reflect BinaryCacheStore changes
BinaryCacheStore no longer implements buildPaths() and ensurePath(),
so we need to use copyPath() / copyClosure().
```
It would be better if the hydra module in NixOS matches the upstream
module.
This replaces some hardcoded values in nginx's VirtualHosts's
configuration with customizable options. Previous values are kept as
default, so nothing should break for existing users.
Co-Authored-By: Florian Klink <flokli@flokli.de>
Lego allows users to use the DNS-01 challenge to validate their
certificates. It is mostly backwards compatible, with a few
caveats.
- extraDomains can no longer have different webroots to the
main webroot for the cert.
- An email address is now mandatory for account creation
The following other changes were required:
- Deprecate security.acme.certs.<name>.plugins, as this was
specific to simp-le
- Rename security.acme.validMin to validMinDays, to avoid
confusion and errors. Lego requires the TTL to be specified in
days
- Add options to cover DNS challenge (dnsProvider,
credentialsFile, dnsPropagationCheck)
- A shared state directory is now used (/var/lib/acme/.lego)
to avoid account creation rate limits and share credentials
between certs
slapd does only print the error and not the line number.
Sometimes it is not even clear that it fails to start
due to an incorrect configuration file.
Example output of slaptest:
5e1b2179 /nix/store/gbn2v319d4qgw851sg41mcmjm5dpn39i-slapd.conf: line 134 objectClass: Missing closing parenthesis before end of input
ObjectClassDescription = "(" whsp
numericoid whsp ; ObjectClass identifier
[ "NAME" qdescrs ]
[ "DESC" qdstring ]
[ "OBSOLETE" whsp ]
[ "SUP" oids ] ; Superior ObjectClasses
[ ( "ABSTRACT" / "STRUCTURAL" / "AUXILIARY" ) whsp ]
; default structural
[ "MUST" oids ] ; AttributeTypes
[ "MAY" oids ] ; AttributeTypes
whsp ")"
slaptest: bad configuration file!
Supporting a path here is important because it allows e.g. fetching a
configuration from a URL. To do this and provide the configuration as
a string, IFD would be necessary. It's just written into a path
anyway.
lib.commitIdFromGitRepo now resolves the refs from the
parent repository in case the supplied path is a file
containing the path to said repository. this adds support
for git-worktree and things alike. see gitrepository-layout(5).
this also:
- adds a new boolean function lib.pathIsRegularFile to
check whether a path is a regular file
- patches lib.revisionWithDefault and
the revision and versionSuffix attributes in
config.system.nixos in order to support git-worktrees
We should wait until after `multi-user.target` is triggered to allow
hardware to finish initializing, such as network devices and USB drives.
This ensures `powertop --auto-tune` sets more tunables to "Good".
Fixes#66820
Fixes this error from `nixos-rebuild switch` introduced by #75893:
setting up tmpfiles
[/etc/tmpfiles.d/nixos.conf:7] Invalid age 'yes'.
warning: error(s) occurred while switching to the new configuration
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In some cases like we've noticed in https://github.com/NixOS/nixpkgs/issues/76169,
having duplicate packages in systemd.packages like
```
systemd.packages = [ gnome-shell gnome-shell gnome-session ];
```
breaks.
Here we use an associative array to ensure no
duplicate paths when we symlink all the units listed
in systemd.packages.
This fixes the dhcpcd issue in https://github.com/NixOS/nixpkgs/issues/76969,
which was exposed by https://github.com/NixOS/nixpkgs/pull/75031
introducing changes in the module ordering and therefore option ordering
too.
The dhcpcd issue would also be fixable by explicitly putting
dhcpcd's paths before others, however it makes more sense for systemd's
default paths to be after all others by default, since they should only
be a fallback, which is how binary finding will work if they come after.
###### Motivation for this change
With space between two options, multiple options just don't work
Looks like xkbOptions then used for generation of xorg.conf.d/00-keyboard.conf.
kbd's man says XkbOptions must be comma-separated without spaces.
https://linux.die.net/man/4/kbd
###### Things done
<!-- Please check what applies. Note that these are not hard requirements but merely serve as information for reviewers. -->
- [ ] Tested using sandboxing ([nix.useSandbox](http://nixos.org/nixos/manual/options.html#opt-nix.useSandbox) on NixOS, or option `sandbox` in [`nix.conf`](http://nixos.org/nix/manual/#sec-conf-file) on non-NixOS linux)
- Built on platform(s)
- [ ] NixOS
- [ ] macOS
- [ ] other Linux distributions
- [ ] Tested via one or more NixOS test(s) if existing and applicable for the change (look inside [nixos/tests](https://github.com/NixOS/nixpkgs/blob/master/nixos/tests))
- [ ] Tested compilation of all pkgs that depend on this change using `nix-shell -p nixpkgs-review --run "nixpkgs-review wip"`
- [ ] Tested execution of all binary files (usually in `./result/bin/`)
- [ ] Determined the impact on package closure size (by running `nix path-info -S` before and after)
- [ ] Ensured that relevant documentation is up to date
- [ ] Fits [CONTRIBUTING.md](https://github.com/NixOS/nixpkgs/blob/master/.github/CONTRIBUTING.md).
###### Notify maintainers
cc @
Currently if you specify home to be someplace else than ~/ for user
then Transmissions always attempts to load the config from the
default location which is $HOME/.config/transmission-daemon based on documentation:
https://github.com/transmission/transmission/wiki/Configuration-Files
Which means that the changes done to the config under settingsDir in
ExecPreStart have no effect because they are modifying a file that is never loaded.
I've added an explicit --config-dir ${settingsDir} to make sure
that Transmission loads the correct config file even when home is changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Previously, we were storing the leader pid in a runtime file and
signalled SIGRTMIN+4 manually.
In systemd 219, the `machinectl poweroff` command was introduced, which
does that for us.
* structured config for main config file allows to launch nagios in
debug mode without having to write the whole config file by hand
* build time syntax check
* all options have types, one more example
* I find it misleading that the main nagios config file is linked in
/etc but that if you change the link in /etc/ and restart nagios, it
has no effect. Have nagios use /etc/nagios.cfg
* fix paths in example nagios config files, which allows to reuse it:
services.nagios.objectDefs =
(map (x: "${pkgs.nagios}/etc/objects/${x}.cfg")
[ "templates" "timeperiods" "commands" ]) ++ [ ./main.cfg ]
* for the above reason, add mailutils to default plugins
Co-Authored-By: Aaron Andersen <aaron@fosslib.net>
xsession gets passed `dm` `wm`, so the desktop manager would be launched
before the window manager resulting in a regular desktop manager
session.
Fixes https://github.com/NixOS/nixpkgs/issues/76625
The missing `\n` in the printf format string prevented multiple channels from
being logged.
The missing `nixpkgs=` in the `NIX_PATH` prevented `nixos-rebuild` from working
if the system configuration has any reference to `nixpkgs`.
Additionally:
* Use process substitution instead of piping printf to avoid creating a subshell.
* Set an empty `IFS` to avoid word splitting.
* Add the `-r` flag to `read` to avoid mangling backslashes.
This fixes a harmless error from systemd-udevd that looks like:
Dec 23 15:35:23 dellbook systemd-udevd[696]:
/nix/store/iixya3ni5whybpq9zz1h7f4pyw7nhd19-udev-rules/99-local.rules:25
Invalid value "..." for RUN (char 101: invalid substitution type),
ignoring, but please fix it.
Using $$ fixes it using the escaping documented at https://www.freedesktop.org/software/systemd/man/udev.html.
The commit b0bbacb521 was a bit too fast
It did set executable bit for log files.
Also, it didn't account for other directories in state dir:
```
# ls -la /var/spool/nginx/
total 32
drwxr-x--- 8 nginx nginx 4096 Dec 26 12:00 .
drwxr-xr-x 4 root root 4096 Oct 10 20:24 ..
drwx------ 2 root root 4096 Oct 10 20:24 client_body_temp
drwx------ 2 root root 4096 Oct 10 20:24 fastcgi_temp
drwxr-x--- 2 nginx nginx 4096 Dec 26 12:00 logs
drwx------ 2 root root 4096 Oct 10 20:24 proxy_temp
drwx------ 2 root root 4096 Oct 10 20:24 scgi_temp
drwx------ 2 root root 4096 Oct 10 20:24 uwsgi_temp
```
With proposed change, only ownership is changed for state files, and mode is left as is
except that statedir/logs is now group accessible.
This change brings pre-existing installations (where the logfiles
are owned by root) in line with the new permssions (where logfiles
are owned by the nginx user)
Currently to run borg job manually, you have to use systemctl:
```
$ systemctl start borgbackup-job-jobname.service
```
This commit makes wrappers around borg jobs available in $PATH, which have
BORG_REPO and connection args set correctly:
```
$ borg-job-jobname list
$ borg-job-jobname mount ::jobname-archive-2019-12-25T00:01:29 /mnt/some-path
$ borg-job-jobname create ::test /some/path
```
Closes: https://github.com/NixOS/nixpkgs/pull/64888
Co-authored-by: Danylo Hlynskyi <abcz2.uprola@gmail.com>
Currently, LXD always use pkgs.zfs, even if boot.zfs.enableUnstable is set. This
change provides the option to change the LXC, LXD and ZFS packages, and
determines the default ZFS package based on zfs.enableUnstable.
When installing a fresh NixOS system it occasionally happens that you
encounter issues that are rather hard to track down since
`nixos-install(8)` doesn't provide any debugging flags.
This patch adds `-L` to force `nix build` to display the build-log on
stderr and `-v` to increase the log-level of Nix.
Also cleanup a bit, we enabled gnome-settings-daemon even when using elementary-settings-daemon.
I wanted the nixos module ascribe the defaults, not these lists in pkgs.
sway: refactor with a wrapper
This moves the wrapper functionality from the NixOS module to a new package
(wrapper) that wraps the original sway package (sway-unwrapped). Therefore it's
now also possible to properly use Sway on non-NixOS systems out of the box.
The new submodule for the wrapperFeatures makes it easy to extend the
functionality which should become useful in the future.
This also introduces a GTK wrapper feature to fix issues with icon/GTK themes,
e.g. when running waybar or wofi. This should also work for #67704. If not, we
might have to add some additional dependencies/arguments for this case.
