Upgrades Hydra to the latest master/flake branch. To perform this
upgrade, it's needed to do a non-trivial db-migration which provides a
massive performance-improvement[1].
The basic ideas behind multi-step upgrades of services between NixOS versions
have been gathered already[2]. For further context it's recommended to
read this first.
Basically, the following steps are needed:
* Upgrade to a non-breaking version of Hydra with the db-changes
(columns are still nullable here). If `system.stateVersion` is set to
something older than 20.03, the package will be selected
automatically, otherwise `pkgs.hydra-migration` needs to be used.
* Run `hydra-backfill-ids` on the server.
* Deploy either `pkgs.hydra-unstable` (for Hydra master) or
`pkgs.hydra-flakes` (for flakes-support) to activate the optimization.
The steps are also documented in the release-notes and in the module
using `warnings`.
`pkgs.hydra` has been removed as latest Hydra doesn't compile with
`pkgs.nixStable` and to ensure a graceful migration using the newly
introduced packages.
To verify the approach, a simple vm-test has been added which verifies
the migration steps.
[1] https://github.com/NixOS/hydra/pull/711
[2] https://github.com/NixOS/nixpkgs/pull/82353#issuecomment-598269471
After upgrading to NixOS 20.03, I've got the following warning:
nginx: [warn] could not build optimal types_hash, you should increase either types_hash_max_size: 2048 or types_hash_bucket_size: 64; ignoring types_hash_bucket_size
The documentation states that "if nginx emits the message requesting
to increase either hash max size or hash bucket size then the first
parameter should first be increased" (aka types_hash_max_size).
In 19.03, the size of mime.types was around 100 entries. In 20.03, we
are around 900 entries. This is due to ff0148d868 which makes nginx
use mailcap mime.types.
In ff0148d868, nginx configuration was modified to use mime.types
from mailcap package as it is more complete. However, there are two
places where mime.types is included in configuration. When the user
was setting `cfg.httpConfig`, the mime.types from nginx was still
used. This commit fix that by moving the common snippet in a variable
of its own and ensure it is used at both places.
While our ETag patch works pretty fine if it comes to serving data off
store paths, it unfortunately broke something that might be a bit more
common, namely when using regexes to extract path components of
location directives for example.
Recently, @devhell has reported a bug with a nginx location directive
like this:
location ~^/\~([a-z0-9_]+)(/.*)?$" {
alias /home/$1/public_html$2;
}
While this might look harmless at first glance, it does however cause
issues with our ETag patch. The alias directive gets broken up by nginx
like this:
*2 http script copy: "/home/"
*2 http script capture: "foo"
*2 http script copy: "/public_html/"
*2 http script capture: "bar.txt"
In our patch however, we use realpath(3) to get the canonicalised path
from ngx_http_core_loc_conf_s.root, which returns the *configured* value
from the root or alias directive. So in the example above, realpath(3)
boils down to the following syscalls:
lstat("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat("/home/$1", 0x7ffd08da6f60) = -1 ENOENT (No such file or directory)
During my review[1] of the initial patch, I didn't actually notice that
what we're doing here is returning NGX_ERROR if the realpath(3) call
fails, which in turn causes an HTTP 500 error.
Since our patch actually made the canonicalisation (and thus additional
syscalls) necessary, we really shouldn't introduce an additional error
so let's - at least for now - silently skip return value if realpath(3)
has failed.
However since we're using the unaltered root from the config we have
another issue, consider this root:
/nix/store/...-abcde/$1
Calling realpath(3) on this path will fail (except if there's a file
called "$1" of course), so even this fix is not enough because it
results in the ETag not being set to the store path hash.
While this is very ugly and we should fix this very soon, it's not as
serious as getting HTTP 500 errors for serving static files.
I added a small NixOS VM test, which uses the example above as a
regression test.
It seems that my memory is failing these days, since apparently I *knew*
about this issue since digging for existing issues in nixpkgs, I found
this similar pull request which I even reviewed:
https://github.com/NixOS/nixpkgs/pull/66532
However, since the comments weren't addressed and the author hasn't
responded to the pull request, I decided to keep this very commit and do
a follow-up pull request.
[1]: https://github.com/NixOS/nixpkgs/pull/48337
Signed-off-by: aszlig <aszlig@nix.build>
Reported-by: @devhell
Acked-by: @7c6f434c
Acked-by: @yorickvP
Merges: https://github.com/NixOS/nixpkgs/pull/80671
Fixes: https://github.com/NixOS/nixpkgs/pull/66532
The volumeID will now be in the format of:
nixos-$EDITON-$RELEASE-$ARCH
an example for the minimal image would look like:
nixos-minimal-20.09-x86-64-linux
It's impossible to move two major-versions forward when upgrading
Nextcloud. This is an issue when comming from 19.09 (using Nextcloud 16)
and trying to upgrade to 20.03 (using Nextcloud 18 by default).
This patch implements the measurements discussed in #82056 and #82353 to
improve the update process and to circumvent similar issues in the
future:
* `pkgs.nextcloud` has been removed in favor of versioned attributes
(currently `pkgs.nextcloud17` and `pkgs.nextcloud18`). With that
approach we can safely backport major-releases in the future to
simplify those upgrade-paths and we can select one of the
major-releases as default depending on the configuration (helpful to
decide whether e.g. `pkgs.nextcloud17` or `pkgs.nextcloud18` should be
used on 20.03 and `master` atm).
* If `system.stateVersion` is older than `20.03`, `nextcloud17` will be
used (which is one major-release behind v16 from 19.09). When using a
package older than the latest major-release available (currently v18),
the evaluation will cause a warning which describes the issue and
suggests next steps.
To make those package-selections easier, a new option to define the
package to be used for the service (namely
`services.nextcloud.package`) was introduced.
* If `pkgs.nextcloud` exists (e.g. due to an overlay which was used to
provide more recent Nextcloud versions on older NixOS-releases), an
evaluation error will be thrown by default: this is to make sure that
`services.nextcloud.package` doesn't use an older version by accident
after checking the state-version. If `pkgs.nextcloud` is added
manually, it needs to be declared explicitly in
`services.nextcloud.package`.
* The `nixos/nextcloud`-documentation contains a
"Maintainer information"-chapter which describes how to roll out new
Nextcloud releases and how to deal with old (and probably unsafe)
versions.
Closes#82056
Dropbear lags behind OpenSSH significantly in both support for modern
key formats like `ssh-ed25519`, let alone the recently-introduced
U2F/FIDO2-based `sk-ssh-ed25519@openssh.com` (as I found when I switched
my `authorizedKeys` over to it and promptly locked myself out of my
server's initrd SSH, breaking reboots), as well as security features
like multiprocess isolation. Using the same SSH daemon for stage-1 and
the main system ensures key formats will always remain compatible, as
well as more conveniently allowing the sharing of configuration and
host keys.
The main reason to use Dropbear over OpenSSH would be initrd space
concerns, but NixOS initrds are already large (17 MiB currently on my
server), and the size difference between the two isn't huge (the test's
initrd goes from 9.7 MiB to 12 MiB with this change). If the size is
still a problem, then it would be easy to shrink sshd down to a few
hundred kilobytes by using an initrd-specific build that uses musl and
disables things like Kerberos support.
This passes the test and works on my server, but more rigorous testing
and review from people who use initrd SSH would be appreciated!
Running the manual on a TTY is useless in the graphical ISOs and not
particularly useful in non-graphical ISOs (since you can also run
'nixos-help').
Fixes#83157.
* Removed the use of gnome-screensaver (https://gitlab.gnome.org/GNOME/gnome-flashback/issues/18)
* Flashback's menu-related environment variables are now set in the gnome3.nix module instead of gnome-panel to resolve dependency conflict.
While renaming `networking.defaultMailServer` directly to
`services.ssmtp` is shorter and probably clearer, it causes eval errors
due to the second rename (directDelivery -> enable) when using e.g. `lib.mkForce`.
For instance,
``` nix
{ lib, ... }: {
networking.defaultMailServer = {
hostName = "localhost";
directDelivery = lib.mkForce true;
domain = "example.org";
};
}
```
would break with the following (rather confusing) error:
```
error: The option value `services.ssmtp.enable' in `/home/ma27/Projects/nixpkgs/nixos/modules/programs/ssmtp.nix' is not of type `boolean'.
(use '--show-trace' to show detailed location information)
```
NixOS 20.03 is built on kernel 5.4 and 19.09 is on 4.19, so we should update
this option to the highest value possible, per linked upstream instructions from
Amazon.
* nixos/nixpkgs.nix: Allow just using config in system
This assertion requires system to work properly. We might not have
this in cases where the user just sets config and wants Nixpkgs to
infer system from that. This adds a default for when this happens,
using doubleFromSystem.
* parens
`$toplevel/system` of a system closure with `x86_64` kernel and `i686` userland should contain "x86_64-linux".
If `$toplevel/system` contains "i686-linux", the closure will be run using `qemu-system-i386`, which is able to run `x86_64` kernel on most Intel CPU, but fails on AMD.
So this fix is for a rare case of `x86_64` kernel + `i686` userland + AMD CPU
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
This was originally applied in 3d1079a20d,
but was reverted due to 1115959a8d causing
evaluation errors on hydra.
This mirrors the behaviour of systemd - It's udev that parses `.link`
files, not `systemd-networkd`.
This was originally applied in 36ef112a47,
but was reverted due to 1115959a8d causing
evaluation errors on hydra.
Broken by 0f973e273c284a97a8dffeab7d9c0b09a88b7139 in #73533
The type of the checkReversePath option allows "strict" and "loose" as
well as boolean values.
If the host network stack is slow to start, the alertmanager fails to
start with this error message:
caller=main.go:256 msg="unable to initialize gossip mesh" err="create memberlist: Failed to get final advertise address: No private IP address found, and explicit IP not provided"
This bug can be reproduced by shutting down the network stack and
restarting the alertmanager.
Note I don't know why I didn't hit this issue with previous
alertmanager releases.
* Linkify all service options used in the code-examples.
* Demonstrated the use of `riot-web.override {}`.
* Moved the example how to configure a postgresql-database for
`matrix-synapse` to this document from the 20.03 release-notes.
Fixes some dependency ordering problems at boot time with services that
require DNS. Without Type=notify these services might be started before
stubby was ready to accept DNS requests.
The v7 series is very different.
This commit introduces the 3 packages: fahclient, fahcontrol and
fahviewer. It also rebuilds the NixOS module to map better with the new
client.
Previously the assertion passed if the kernel had support OR the
filter was *enabled*. In the case of a kernel without support, the
`checkReversePath` option defaulted to false, and then failed the
assertion.
...even when networkd is disabled
This reverts commit ce78f3ac70, reversing
changes made to dc34da0755.
I'm sorry; Hydra has been unable to evaluate, always returning
> error: unexpected EOF reading a line
and I've been unable to reproduce the problem locally. Bisecting
pointed to this merge, but I still can't see what exactly was wrong.
extraModprobeConfig could be applied too late i.e. if the driver has been
loaded in initrd, while the harddrive is still encrypted.
Using a kernelParams works in all cases however.
Running haproxy with "DynamicUser = true" doesn't really work, since
it prohibits specifying a TLS certificate bundle with limited
permissions. This revives the haproxy user and group, but makes them
dynamically allocated by NixOS, rather than statically allocated. It
also adds options to specify which user and group haproxy runs as.
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
