With the systemd update to v242 five lines are not longer sufficient to
verify that the storage was verified. In order to reduce future test
failures increasing it to 10 lines sounds like a sane amount.
The udev rules we are shipping no longer work with systemd v242 and were
remove upstream some time ago. It seems like the entire renaming is now
done in C and not in the udev rules.
Remove the btsync module. Bittorrent Sync was renamed to Resilio Sync in
2016, which is supported by the resilio module. Since Resilio Sync had
some security updates since 2016, it is not safe to run Bittorrent Sync
anymore.
Partially reapplies 35af6e3605
buildPackages need to be used only for image builders.
Otherwise, the bootloader builder may be setup using the wrong arch,
rendering it unusable
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
define commands like "waiting for the mysql socket to appear" or "setup
initial databases" in a let expression, so the main control flow becomes
more readable.
We need to keep using `RuntimeDirectory=mysqld`, which translates to
`/run/mysqld`, as this is used for the location of the file socket, that
could differ with what is configured via `cfg.pidDir`.
Before, changing any peers caused the entire WireGuard interface to
be torn down and rebuilt. By configuring each peer in a separate
service we're able to only restart the affected peers.
Adding each peer individually also means individual peer
configurations can fail, but the overall interface and all other peers
will still be added.
A WireGuard peer's internal identifier is its public key. This means
it is the only reliable identifier to use for the systemd service.
5404595b55 relocated code but kept
one backslah too many, leading to
$ tmux
error creating /run/user/$(id -u)/tmux-1000 (No such file or directory)
/run/user/$UID/ is created by pam_systemd(3) which also populates
XD_RUNTIME_DIR with that value.
Alternatively, TMUX_TMPDIR might simply default to XDG_RUNTIME_DIR
without providing the same directory yet again as default string in
parameter substitution, however such behaviour change is subject to
another patch.
In fact, with `security.polkit.enable = false` systemd_logind(8) fails
to start and /run/user/$UID/ is never created for unprivileged users
in proper login sessions; XDG_RUNTIME_DIR would consequently not be
set either.
Removing the fallback to /run/user/$UID/ would have caused TMUX_TMPDIR
to be empty, which in turn would lead tmux(1) to use /tmp/. This
effectively breaks the idea of isolated sockets entirely while hiding
errors from the user.
When calling reload, bird attempts to reload the file that was given in
the command line. As the change of ${configFile} is never picked up,
bird will just reload the old file.
This way, the configuration is placed at a known location and updated.
The clickshare-csc1 package brings a udev rule file
to grant access to the ClickShare dongle if connected.
This module provides an option to install that rule file.
Only users in the "clickshare" users group have access.
We differentiate between modules and baseModules in the
VM builder for NixOS tests. This way, nesting.children, eventhough
it doesn't inherit from parent, still has enough config to
actually complete the test. Otherwise, the qemu modules
would not be loaded, for example, and a nesting.children
statement would not evaluate.
* compton-git: 5.1-rc2 -> 6.2
vsync is now a boolean option, see:
https://github.com/yshui/compton/pull/130
menu-opacity is deprecated and there's a warning that says:
Please use the wintype option `opacity` of `popup_menu` and
`dropdown_menu` instead.
* nixos/compton: Keep vSync option backwards compatible
The new upstream option tries to make the best choice for the user.
Therefore the behaviour should stay the same with this backwards
compatibility patch.
* compton-git: Remove DRM option
It's deprecated and shouldn't be used.
https://github.com/yshui/compton/pull/130/files#r285505456
* compton-git: Remove new_backends option
Was removed in "Let old/new backends co-exist"
b0c5db9f5aa500dc3568cc6fe68493df98794d4d
* compton: 0.1_beta2.5 -> 6.2
Drop the legacy, unmaintained version and use the fork for real.
Fix#61859.
Assertion fails when a Google Compute Engine image is built, because
now choices of filesystem types are restricted to `f2fs` and `ext` family if
auto-resizing is enabled.
This change will pin the filesystem used on such an image to be `ext4` for now.
A new internal option `hardware.opengl.setLdLibraryPath` is added which controls if `LD_LIBRARY_PATH` should be set to `/run/opengl-driver(-32)/lib`. It is false by default and is meant to be set to true by any driver which requires it. If this option is false, then `opengl.nix` and `xserver.nix` will not set `LD_LIBRARY_PATH`.
Currently Mesa and NVidia drivers don't set `setLdLibraryPath` because they work with libglvnd and do not override libraries, while `amdgpu-pro`, `ati` and `parallels-guest` set it to true (the former two really need it, the last one doesn't build so is presumed to).
Additionally, the `libPath` attribute within entries of `services.xserver.drivers` is removed. This made `xserver.nix` add the driver path directly to the `LD_LIBRARY_PATH` for the display manager (including X server). Not only is it redundant when the driver is added to `hardware.opengl.package` (assuming that `hardware.opengl.enable` is true), in fact all current drivers except `ati` set it incorrectly to the package path instead of package/lib.
This removal of `LD_LIBRARY_PATH` could break certain packages using CUDA, but only those that themselves load `libcuda` or other NVidia driver libraries using `dlopen` (not if they just use `cudatoolkit`). A few have already been fixed but it is practically impossible to test all because most packages using CUDA are libraries/frameworks without a simple way to test.
Fixes#11434 if only Mesa or NVidia graphics drivers are used.
Back in 2013, update-mime-database started using fdatasync() to write out
its changes after processing each file in /share/mime, with the reasoning
that a corrupted database from an interruption midway would be
problematic for applications[1]. Unfortunately, this caused a
significant regression in the time required to run update-mime-database:
commonly from under a second to half a minute or more.
This delay affects the time required to build system-path on NixOS, when
xdg.mime.enable is true (the default). For example, on one of my systems
system-path builds in ~48 seconds, 45 of which are update-mime-database.
This makes rapidly building new system configurations not fun.
This commit disables the calls to fdatasync(). update-mime-database
checks an environment variable, PKGSYSTEM_ENABLE_FSYNC, to determine
whether it should sync, and we can set this to false. system-path
already only has whatever filesystem commit guarantees that the Nix
builder provides. Furthermore, there is no risk of a failed MIME
database update messing up existing packages, because this is Nix.
(This issue was also reported at and discussed by Debian, Red Hat, and
Gentoo at least.)
[1] https://bugs.freedesktop.org/show_bug.cgi?id=70366
This is actually very useful. Allows you to test switch-to-configuration
nesting.children is still currently still broken as it will throw
away 'too much' of the config, including the modules that make
nixos tests work in the first place. But that's something for
another time.
As a oneshot service, if the startup failed it would never be attempted again.
This is problematic when peer's addresses require DNS. DNS may not be reliably available at
the time wireguard starts. Converting this to a simple service with Restart
and RestartAfter directives allows the service to be reattempted, but at
the cost of losing the oneshot semantics.
Signed-off-by: Maximilian Bosch <maximilian@mbosch.me>
Passwords should not be stored in plain text by default. On existing
installations the next time a users user accounts will automatically
be upgraded from plain to hashed one-by-one as they log in.
With `sshd -t` config validation for SSH is possible. Until now, the
config generated by Nix was applied without any validation (which is
especially a problem for advanced config like `Match` blocks).
When deploying broken ssh config with nixops to a remote machine it gets
even harder to fix the problem due to the broken ssh that makes reverts
with nixops impossible.
This change performs the validation in a Nix build environment by
creating a store path with the config and generating a mocked host key
which seems to be needed for the validation. With a broken config, the
deployment already fails during the build of the derivation.
The original attempt was done in #56345 by adding a submodule for Match
groups to make it harder screwing that up, however that made the module
far more complex and config should be described in an easier way as
described in NixOS/rfcs#42.
Some packages like `ibus-engines.typing-booster` require the dictionary
`fr_FR.dic` to provide proper support for the french language.
Until now the hunspell package set of nixpkgs didn't provide this
dictionary. It has been recommended to use `fr-moderne` as base and link
`fr_FR.dic` from it as done by other distros such as ArchLinux.
See https://github.com/NixOS/nixpkgs/issues/46940#issuecomment-423684570Fixes#46940
nixos/nextcloud: Add documentation for nextcloud app installation and updates
nixos/nextcloud: Enable autoUpdateApps in nextcloud test
nixos/nextcloud: Fix typo in nixos/modules/services/web-apps/nextcloud.xml
Co-Authored-By: Florian Klink <flokli@flokli.de>
nixos/nextcloud: Escape html in option description
nixos/nextcloud: Fix autoUpdateApps URL in documentation.
Co-Authored-By: Florian Klink <flokli@flokli.de>
I noticed xinetd process doesn't get exec'd on launch, exec here so the bash
process doesn't stick around.
Signed-off-by: William Casarin <jb55@jb55.com>
All options within geoclue.conf[0] have been made configurable.
Additonally, we can now specify whether or not GeoClue
should ask the agent to authorize an application like so:
```
services.geoclue2.appConfig."redshift" = {
isAllowed = true;
isSystem = true;
};
```
[0]: https://gitlab.freedesktop.org/geoclue/geoclue/blob/2.5.2/data/geoclue.conf.in
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
This was a testing oversight that came from #61009 -- I forgot to test
the new traceFormat option with older server versions while I was
working on FDB 6.1.
Since trace_format is only available in 6.1+, emitting it
unconditionally caused older versions of the database fail to start,
reporting an error. We simply gate it behind a version check instead,
and assert the format is always XML on older versions. This avoids the
case where the user has an old version, changes traceFormat willingly,
and then is confused by why it didn't work.
As reported by @TimothyKlim in the comments on commit
c55b9236f0. See
c55b9236f0 (r33566132)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
* Don't use `literalExample`, raw Nix values can directly be specified
as an option example which provides support for highlighting in the
manual as well.
* Escape shell args for `extraOptions`: I.e. the `-n` option might be
problematic as a longer notification command might be misinterpreted.
The module installs `zmap` globally and links the config files to
`/etc/zmap`, the default location of config files for zmap.
The package provides pretty much a sensitive default, custom configs can
be created like this:
```
{ lib, ... }:
{
environment.etc."zmap/blacklist.conf" = lib.mkForce {
text = ''
# custom zmap blacklist
0.0.0.0/0
'';
};
}
```
Quite some fixing was needed to get this to work.
Changes in VirtualBox and additions:
- VirtualBox is no longer officially supported on 32-bit hosts so i686-linux is removed from platforms
for VirtualBox and the extension pack. 32-bit additions still work.
- There was a refactoring of kernel module makefiles and two resulting bugs affected us which had to be patched.
These bugs were reported to the bug tracker (see comments near patches).
- The Qt5X11Extras makefile patch broke. Fixed it to apply again, making the libraries logic simpler
and more correct (it just uses a different base path instead of always linking to Qt5X11Extras).
- Added a patch to remove "test1" and "test2" kernel messages due to forgotten debugging code.
- virtualbox-host NixOS module: the VirtualBoxVM executable should be setuid not VirtualBox.
This matches how the official installer sets it up.
- Additions: replaced a for loop for installing kernel modules with just a "make install",
which seems to work without any of the things done in the previous code.
- Additions: The package defined buildCommand which resulted in phases not running, including RUNPATH
stripping in fixupPhase, and installPhase was defined which was not even run. Fixed this by
refactoring using phases. Had to set dontStrip otherwise binaries were broken by stripping.
The libdbus path had to be added later in fixupPhase because it is used via dlopen not directly linked.
- Additions: Added zlib and libc to patchelf, otherwise runtime library errors result from some binaries.
For some reason the missing libc only manifested itself for mount.vboxsf when included in the initrd.
Changes in nixos/tests/virtualbox:
- Update the simple-gui test to send the right keys to start the VM. With VirtualBox 5
it was enough to just send "return", but with 6 the Tools thing may be selected by
default. Send "home" to reliably select Tools, "down" to move to the VM and "return"
to start it.
- Disable the VirtualBox UART by default because it causes a crash due to a regression
in VirtualBox (specific to software virtualization and serial port usage). It can
still be enabled using an option but there is an assert that KVM nested virtualization
is enabled, which works around the problem (see below).
- Add an option to enable nested KVM virtualization, allowing VirtualBox to use hardware
virtualization. This works around the UART problem and also allows using 64-bit
guests, but requires a kernel module parameter.
- Add an option to run 64-bit guests. Tested that the tests pass with that. As mentioned
this requires KVM nested virtualization.
Currently, this uses the somewhat crude method of setting LD_PRELOAD in the
system environment. This works, but should be considered a stepping stone to
a more robust solution.
following up #59148
I forgot the default case of the architectures which do not have minor brothers whose code they can run ("westmere" or any of of AMD)
This is needed because some PostgreSQL plugins don't have a bin
directory. If only these plugins are listed in cfg.extraPlugins buildEnv
will turn $out/bin into a symbolic link to ${pg}/bin. Lateron we try to
rm $out/bin/{pg_config,postgres,pg_ctl} which will then fail because
$out/bin will be read-only.
I was pointed towards a small syntax error in the `nixpkgs.overlays`
documentation. There was a trailing semicolon after the overlay
function.
I also aligned the code a bit better so opening and closing brackets can
be visually matched much better (IMO).
https://humdi.net/vnstat/CHANGES
* enable tests
* add hardening options from upstream's
example service
* fix "documentation" setting in service:
either needs to be `unitConfig.Documentation`
(uppercase) or lowercase but not within unitConfig.
Previously, if you, for example, set
services.xserver.displayManager.sddm.enable, but forgot to set
services.xserver.enable, you would get an error message that looked like
this:
error: attribute 'display-manager' missing
Which was not particularly helpful.
Using assertions, we can make this message much better.
The type of ZNC's config option specifies that a configuration like
config.User.paul = null;
should be valid, which is useful for clearing/disabling property sets
like Users and Networks. However until now the config generator
implementation didn't actually cover null values, meaning you'd get an
error like
error: value is null while a set was expected, at /foo.nix:29:10
This fixes the implementation to correcly allow clearing of property
sets.
The kubeconfig provided to the kubernetes-control-plane-online.service
is invalid. However, the apiserver /healthz endpoint can be accessed without auth so it's
simpler to just use curl for that.
The two directories KDB and PTree do not exist before the SKS DB is
build for the first time. If /var/db/sks is empty and the module is
enabled via "services.sks.enable = true;" the following error will
occur:
...-unit-script-sks-db-pre-start[xxx]:
ln: failed to create symbolic link 'KDB/DB_CONFIG': No such file or directory
To avoid this both links have to be created after the DB is build.
Note: Creating the directories manually might be better but the initial
build might be skipped as a result:
unit-script-sks-db-pre-start[xxxxx]: KeyDB directory already exists. Exiting.
unit-script-sks-db-pre-start[xxxxx]: PTree directory already exists. Exiting.
This change was only a temporary workaround and isn't required anymore,
since /etc/systemd/system/system.slice should not be present on any
recent NixOS system (which makes this change a no-op).
This reverts commit 7098b0fcdf.
This change will load all configuration files from /etc, to make it easy
to override them, but fallback to /nix/store/.../etc/sway/config to make
Sway work out-of-the-box with the default configuration on non NixOS
systems.
Unfortunately the changes in ab5dcc7068
introduced a typo (took me a while to spot that...) that broke the
whole module (or at least the sks-db systemd unit).
The systemd unit was failing with the following error message:
...-unit-script-sks-db-pre-start[xxx]: KDB/DB_CONFIG exists but is not a symlink.
The build error has been introduced by 56dcc319cf.
Using a <simplesect/> within a <para/> is not allowed and subsequently
fails to validate while building the manual.
So instead, I moved the <simplesect/> further down and outside of the
<para/> to fix this.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aaronjanse, @Lassulus, @danbst
The default config of i3 provides a key binding to reload, so changes
take effect immediately:
```
bindsym $mod+Shift+c reload
```
Unfortunately the current module uses the store path of the `configFile`
option. So when I change the config in NixOS, a store path will be
created, but the current i3 process will continue to use the old one,
hence a restart of i3 is required currently.
This change links the config to `/etc/i3/config` and alters the X
startup script accordingly so after each rebuild, the config can be
reloaded.
This allows configuring IP addresses on a tinc interface using
networking.interfaces."tinc.${n}".ipv[46].addresses.
Previously, this would fail with timeouts, because of the dependency
chain
tinc.${netname}.service
--after--> network.target
--after--> network-addresses-tinc.${n}.service (and network-link-…)
--after--> sys-subsystem-net-devices-tinc.${n}.device
But the network interface doesn't exist until tinc creates it! So
systemd waits in vain for the interface to appear, and by then the
network-addresses-* and network-link-* units have failed. This leads
to the network link not being brought up and the network addresses not
being assigned, which in turn stops tinc from actually working.
cross-compilation of `btrfs-tools` is broken, and this usually needless dependency of each system closure on `btrfs-tools` prevents cross-compilation of whole system closures
Ideally, private keys never leave the host they're generated on - like
SSH. Setting generatePrivateKeyFile to true causes the PK to be
generate automatically.
Some ACME clients do not generate full.pem, which is the same as
fullchain.pem + the certificate key (key.pem), which is not necessary
for verifying OCSP staples.
I have a nixops network where I deploy containers using the `container`
backend which uses `nixos-container` intenrally to deploy several
containers to a certain host.
During that time I removed and added new containers and while trying to
deploy those to a different host I realized that it isn't guaranteed
that each container gets the same IP address which is a problem as some
parts of the deployment need to know which container is using which IP
(i.e. to configure port forwarding on the host).
With this change you can specify the container's IP like this (and don't
have to use the arbitrarily used 10.233.0.0/16 subnet):
```
$ nixos-container create test --config-file test-container.nix \
--local-address 10.235.1.2 --host-address 10.235.1.1
```
This is an implementation of wireguard support using wg-quick config
generation.
This seems preferrable to the existing wireguard support because
it handles many more routing and resolvconf edge cases than the
current wireguard support.
It also includes work-arounds to make key files work.
This has one quirk:
We need to set reverse path checking in the firewall to false because
it interferes with the way wg-quick sets up its routing.
This is to make sure that we get different ETag values whenever we
switch to a different store path but with the same file contents.
I've checked this against the old behaviour without the patch and it
fails as expected.
Signed-off-by: aszlig <aszlig@nix.build>
Copy-paste from iso-image.nix
Besides the simplification, it should use `pkgs.buildPackages.squashfsTools` because it is used in `nativeBuildInputs` instead of incorrect `pkgs.squashfsTools` which was forced by `import'
This makes sure that when a user hasn't set a Prometheus option it
won't show up in the prometheus.yml configuration file. This results
in smaller and easier to understand configuration files.
We previously filtered out the `_module` attribute in a NixOS
configuration by filtering it using the option's `apply` function.
This meant that every option that had a submodule type needed to have
this apply function. Adding this function is easy to forget thus this
mechanism is error prone.
We now recursively filter out the `_module` attributes at the place we
construct the Prometheus configuration file. Since we now do the filtering
centrally we don't have to do it per option making it less prone to errors.
This results in a smaller prometheus.yml config file.
It also allows us to use the same options for both prometheus-1 and
prometheus-2 since the new options for prometheus-2 default to null
and will be filtered out if they are not set.
From gkd-capability.c:
This program needs the CAP_IPC_LOCK posix capability.
We want to allow either setuid root or file system based capabilies
to work. If file system based capabilities, this is a no-op unless
the root user is running the program. In that case we just drop
capabilities down to IPC_LOCK. If we are setuid root, then change to the
invoking user retaining just the IPC_LOCK capability. The application
is aborted if for any reason we are unable to drop privileges.
Get these from upstream tox-node package instead.
This is likely to cause less maintenance overhead over time and
following upstream bootstrap node changes is automated.
This adds the following new packages:
+ elasticsearch7
+ elasticsearch7-oss
+ logstash7
+ logstash7-oss
+ kibana7
+ kibana7-oss
+ filebeat7
+ heartbeat7
+ metricbeat7
+ packetbeat7
+ journalbeat7
The default major version of the ELK stack stays at 6. We should
probably set it to 7 in a next commit.
Same problem as described in acbadcdbba.
When using multiple interfaces for wifi with `networking.wlanInterfaces`
and the interface for `hostapd` contains a dash, this will fail as
systemd escapes dashes in its device names.
The manpage claims that the "limit" in the setting::
<name>:[<limit>:]<regex>
is optional and defaults to zero, implying no limit.
However, tests confirmed that it actually isn't optional.
Without limit, the setting ``any:.*`` places
outbound jobs on infinite hold if no particular
modem was specified on the sendfax command line.
The new default value ``any:0:.*`` from
this commit uses any available modem to
send jobs if not modem was given to sendfax.
This results in a simpler service unit which doesn't first have to
start a shell:
> cat /nix/store/s95nsr8zbkblklanqpkiap49mkwbaq45-unit-alertmanager.service/alertmanager.service
...
ExecStart=/nix/store/4g784lwcy7kp69hg0z2hfwkhjp2914lr-alertmanager-0.16.2-bin/bin/alertmanager \
--config.file /nix/store/p2c7fyi2jkkwq04z2flk84q4wyj2ggry-checked-config \
--web.listen-address [::1]:9093 \
--log.level warn
...
Commit 29d7d8f44d has introduced another
section with the ID "sec-release-19.09-incompatibilities", which
subsequently causes the build to fail.
I just merged both sections and the manual is now building again.
Signed-off-by: aszlig <aszlig@nix.build>
Documize is an open-source alternative for wiki software like Confluence
based on Go and EmberJS. This patch adds the sources for the community
edition[1], for commercial their paid-plan[2] needs to be used.
For commercial use a derivation that bundles the commercial package and
contains a `$out/bin/documize` can be passed to
`services.documize.enable`.
The package compiles the Go sources, the build process also bundles the
pre-built frontend from `gui/public` into the binary.
The NixOS module generates a simple `systemd` unit which starts the
service as a dynamic user, database and a reverse proxy won't be
configured.
[1] https://www.documize.com/get-started/
[2] https://www.documize.com/pricing/
Before this change, only passwords not containing shell metacharacters could be
used, and because the password was passed as a command-line argument, local
users could (in a very small window of time) record the password and (in an
indefinity window of time) record the length of the password.
We also use the opportunity to add a call to `exec` in the systemd start
script, so that no shell needs to hang around waiting for iodine to stop.
`phpPackage` is 7.3 by default, but `pkgs.php` is 7.2,
so this saves the need for an extra copy of php
for the purpose of running nextcloud's cron;
more importantly this fixes problems with extensions
not loading since they are built against a different php.
Since the switch to check the nginx config with gixy in
59fac1a6d7, the ACME test doesn't build
anymore, because gixy reports the following false-positive (reindented):
>> Problem: [alias_traversal] Path traversal via misconfigured alias.
Severity: MEDIUM
Description: Using alias in a prefixed location that doesn't ends with
directory separator could lead to path traversal
vulnerability.
Additional info: https://github.com/yandex/gixy/blob/master/docs/en/plugins/aliastraversal.md
Pseudo config:
server {
server_name letsencrypt.org;
location /documents/2017.11.15-LE-SA-v1.2.pdf {
alias /nix/store/y4h5ryvnvxkajkmqxyxsk7qpv7bl3vq7-2017.11.15-LE-SA-v1.2.pdf;
}
}
The reason this is a false-positive is because the destination is not a
directory, so something like "/foo.pdf../other.txt" won't work here,
because the resulting path would be ".../destfile.pdf../other.txt".
Nevertheless it's a good idea to use the exact match operator (=), to
not only shut up gixy but also gain a bit of performance in lookup (not
that it would matter in our test).
Signed-off-by: aszlig <aszlig@nix.build>
With CUPS v2.3b5, the configuration directive `SetEnv`
moved from `cupsd.conf` to `cups-files.conf`. See also
d47f6aec43 .
We have to follow up as `SetEnv` is now ignored in `cupsd.conf`.
Without this, executables called by cups
can't find other executables they depend on,
like `gs` or `perl`.
When using a different database, the evaluation fails as
`config.services.postgresql.package` is only set if `services.postgresql` is enabled.
Also, the systemd service shouldn't have a relation to postgres if a
remote database is used.
which was wrongly specified as types.lines
Prevent it from getting copied to nix store as people might use it for
credentials, and make the tests cover it.
Also add back tests, don't seem broken anymore.
This is just fine:
nix-build ./nixos/release.nix -A tests.kafka.kafka_2_1.x86_64-linux -A tests.kafka.kafka_2_2.x86_64-linux
See https://github.com/browserpass/browserpass-native/issues/31
Additionally browserpass was removed from systemPackages, because it
doesn't need to be installed, browsers will get the path to the binary
from the native messaging host JSON.
Currently if you want to properly chroot a systemd service, you could do
it using BindReadOnlyPaths=/nix/store or use a separate derivation which
gathers the runtime closure of the service you want to chroot. The
former is the easier method and there is also a method directly offered
by systemd, called ProtectSystem, which still leaves the whole store
accessible. The latter however is a bit more involved, because you need
to bind-mount each store path of the runtime closure of the service you
want to chroot.
This can be achieved using pkgs.closureInfo and a small derivation that
packs everything into a systemd unit, which later can be added to
systemd.packages.
However, this process is a bit tedious, so the changes here implement
this in a more generic way.
Now if you want to chroot a systemd service, all you need to do is:
{
systemd.services.myservice = {
description = "My Shiny Service";
wantedBy = [ "multi-user.target" ];
confinement.enable = true;
serviceConfig.ExecStart = "${pkgs.myservice}/bin/myservice";
};
}
If more than the dependencies for the ExecStart* and ExecStop* (which
btw. also includes script and {pre,post}Start) need to be in the chroot,
it can be specified using the confinement.packages option. By default
(which uses the full-apivfs confinement mode), a user namespace is set
up as well and /proc, /sys and /dev are mounted appropriately.
In addition - and by default - a /bin/sh executable is provided, which
is useful for most programs that use the system() C library call to
execute commands via shell.
Unfortunately, there are a few limitations at the moment. The first
being that DynamicUser doesn't work in conjunction with tmpfs, because
systemd seems to ignore the TemporaryFileSystem option if DynamicUser is
enabled. I started implementing a workaround to do this, but I decided
to not include it as part of this pull request, because it needs a lot
more testing to ensure it's consistent with the behaviour without
DynamicUser.
The second limitation/issue is that RootDirectoryStartOnly doesn't work
right now, because it only affects the RootDirectory option and doesn't
include/exclude the individual bind mounts or the tmpfs.
A quirk we do have right now is that systemd tries to create a /usr
directory within the chroot, which subsequently fails. Fortunately, this
is just an ugly error and not a hard failure.
The changes also come with a changelog entry for NixOS 19.03, which is
why I asked for a vote of the NixOS 19.03 stable maintainers whether to
include it (I admit it's a bit late a few days before official release,
sorry for that):
@samueldr:
Via pull request comment[1]:
+1 for backporting as this only enhances the feature set of nixos,
and does not (at a glance) change existing behaviours.
Via IRC:
new feature: -1, tests +1, we're at zero, self-contained, with no
global effects without actively using it, +1, I think it's good
@lheckemann:
Via pull request comment[2]:
I'm neutral on backporting. On the one hand, as @samueldr says,
this doesn't change any existing functionality. On the other hand,
it's a new feature and we're well past the feature freeze, which
AFAIU is intended so that new, potentially buggy features aren't
introduced in the "stabilisation period". It is a cool feature
though? :)
A few other people on IRC didn't have opposition either against late
inclusion into NixOS 19.03:
@edolstra: "I'm not against it"
@Infinisil: "+1 from me as well"
@grahamc: "IMO its up to the RMs"
So that makes +1 from @samueldr, 0 from @lheckemann, 0 from @edolstra
and +1 from @Infinisil (even though he's not a release manager) and no
opposition from anyone, which is the reason why I'm merging this right
now.
I also would like to thank @Infinisil, @edolstra and @danbst for their
reviews.
[1]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477322127
[2]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477548395
eb90d97009 broke nslcd, as /run/nslcd was
created/chowned as root user, while nslcd wants to do parts as nslcd
user.
This commit changes the nslcd to run with the proper uid/gid from the
start (through User= and Group=), so the RuntimeDirectory has proper
permissions, too.
In some cases, secrets are baked into nslcd's config file during startup
(so we don't want to provide it from the store).
This config file is normally hard-wired to /etc/nslcd.conf, but we don't
want to use PermissionsStartOnly anymore (#56265), and activation
scripts are ugly, so redirect /etc/nslcd.conf to /run/nslcd/nslcd.conf,
which now gets provisioned inside ExecStartPre=.
This change requires the files referenced to in
users.ldap.bind.passwordFile and users.ldap.daemon.rootpwmodpwFile to be
readable by the nslcd user (in the non-nslcd case, this was already the
case for users.ldap.bind.passwordFile)
fixes#57783
First of all, the reason I added this to the "highlights" section is
that we want users to be aware of these options, because in the end we
really want to decrease the attack surface of NixOS services and this is
a step towards improving that situation.
The reason why I'm adding this to the changelog of the NixOS 19.03
release instead of 19.09 is that it makes backporting services that use
these options easier. Doing the backport of the confinement module after
the official release would mean that it's not part of the release
announcement and potentially could fall under the radar of most users.
These options and the whole module also do not change anything in
existing services or affect other modules, so they're purely optional.
Adding this "last minute" to the 19.03 release doesn't hurt and is
probably a good preparation for the next months where we hopefully
confine as much services as we can :-)
I also have asked @samueldr and @lheckemann, whether they're okay with
the inclusion in 19.03. While so far only @samueldr has accepted the
change, we can still move the changelog entry to the NixOS 19.09 release
notes in case @lheckemann rejects it.
Signed-off-by: aszlig <aszlig@nix.build>
So far we had MountFlags = "private", but as @Infinisil has correctly
noticed, there is a dedicated PrivateMounts option, which does exactly
that and is better integrated than providing raw mount flags.
When checking for the reason why I used MountFlags instead of
PrivateMounts, I found that at the time I wrote the initial version of
this module (Mar 12 06:15:58 2018 +0100) the PrivateMounts option didn't
exist yet and has been added to systemd in Jun 13 08:20:18 2018 +0200.
Signed-off-by: aszlig <aszlig@nix.build>
Noted by @Infinisil on IRC:
infinisil: Question regarding the confinement PR
infinisil: On line 136 you do different things depending on
RootDirectoryStartOnly
infinisil: But on line 157 you have an assertion that disallows that
option being true
infinisil: Is there a reason behind this or am I missing something
I originally left this in so that once systemd supports that, we can
just flip a switch and remove the assertion and thus support
RootDirectoryStartOnly for our confinement module.
However, this doesn't seem to be on the roadmap for systemd in the
foreseeable future, so I'll just remove this, especially because it's
very easy to add it again, once it is supported.
Signed-off-by: aszlig <aszlig@nix.build>
These are all `mkRenamedOptionModule` ones from 2015 (there are none
from 2014). `mkAliasOptionModule` from 2015 were left in because those
don't give any warning at all.
users.ldap.daemon.rootpwmodpw -> users.ldap.daemon.rootpwmodpwFile
users.ldap.bind.password -> users.ldap.bind.passwordFile
as users.ldap.daemon.rootpwmodpw never was part of a release, no
mkRenamedOptionModule is introduced.
Regression introduced by c94005358c.
The commit introduced declarative docker containers and subsequently
enables docker whenever any declarative docker containers are defined.
This is done via an option with type "attrsOf somesubmodule" and a check
on whether the attribute set is empty.
Unfortunately, the check was whether a *list* is empty rather than
wether an attribute set is empty, so "mkIf (cfg != [])" *always*
evaluates to true and thus subsequently enables docker by default:
$ nix-instantiate --eval nixos --arg configuration {} \
-A config.virtualisation.docker.enable
true
Fixing this is simply done by changing the check to "mkIf (cfg != {})".
Tested this by running the "docker-containers" NixOS test and it still
passes.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @benley, @danbst, @Infinisil, @nlewo
