- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
Having pam_unix set to "sufficient" means early-succeeding account
management group, as soon as pam_unix.so is succeeding.
This is not sufficient. For example, nixos modules might install nss
modules for user lookup, so pam_unix.so succeeds, and we end the stack
successfully, even though other pam account modules might want to do
more extensive checks.
Other distros seem to set pam_unix.so to 'required', so if there are
other pam modules in that management group, they get a chance to do some
validation too.
For SSSD, @PsyanticY already added a workaround knob in
https://github.com/NixOS/nixpkgs/pull/31969, while stating this should
be the default anyway.
I did some thinking in what could break - after this commit, we require
pam_unix to succeed, means we require `getent passwd $username` to
return something.
This is the case for all local users due to the passwd nss module, and
also the case for all modules installing their nss module to
nsswitch.conf - true for ldap (if not explicitly disabled) and sssd.
I'm not so sure about krb5, cc @eqyiel for opinions. Is there some nss
module loaded? Should the pam account module be placed before pam_unix?
We don't drop the `security.pam.services.<name?>.sssdStrictAccess`
option, as it's also used some lines below to tweak error behaviour
inside the pam sssd module itself (by changing it's 'control' field).
This is also required to get admin login for Google OS Login working
(#51566), as their pam_oslogin_admin accounts module takes care of sudo
configuration.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
* modularity: Document the ability to use non-files in imports
* Update nixos/doc/manual/configuration/modularity.xml
Co-Authored-By: Baughn <svein@google.com>
This fixes some quirks I introduced in previous commits.
1. No need for an extra newline when printing the output of shell commands.
2. 'or die' is what's already used in the NixOS test sources, while
'die unless' has no occurrences.
* run as user 'slurm' per default instead of root
* add user/group slurm to ids.nix
* fix default location for the state dir of slurmctld:
(/var/spool -> /var/spool/slurmctld)
* Update release notes with the above changes
TrueCrypt has been retired for a while now and the source archive we
pointed to is gone. Moreover the VeraCrypt fork is available, maintained
and fixes issues previous audits found in TrueCrypt.
Nixpkgs' channel currently can't move forward so long as there is a
trace in evaluating the top-level arguments. Which means that it isn't
possible to add a warning message to warn users of future package
removal.
So the only way forward appears to be just removing the alias
altogether.
(cherry picked from commit b4133ebc17c2742a76d912f4f0bf46719bc7800e)
The previous tentative to the fix got the order mixed up a bit. This
new fix has been re-verified to get them in the good order as per the
instructions in the following chapters.
The tests in <nixos/tests/installer.nix> are using `parted`, so they are
bound to be better tested than `fdisk`.
This is brought on by a couple issues, plus reports on IRC that the
`fdisk` instructions didn't work as expected.
* #39354
* #46309
* #39942
* #45478
Care was taken so that the other documented steps did not need changes.
In all this kerfufle, a slight re-organization of the Chapter has been
made, allowing better deep linking.
While it seemingly brings more attention to the macOS notes with the
default docbook template, it better represents which parts of the
section are about macOS, and which parts are simply in the flow of the
text; otherwise the last paragraph may be lost into the details for
macOS.
Nix commands inside the container have been broken since 18.03,
and no fix is yet in sight. Lets remove from the documentation
that this is a usecase that we support, as it doesn't seem
likely that this will be fixed before 18.09 either.
See #40355
- New dependency on 'getconf' binary for
3aa619e9ef/src/vm_memory_monitor.erl (L448)
- New dependency on 'socat' for systemd notifications
4a3ee3a336/src/rabbit.erl (L361)
- elixir_1_6 for a new 'rabbitmqctl' tool
- Replace patching with providing custom PATH, as we already have some
other things here
- Renamed package in all-packages.nix from a legacy spelling
Because when I see "config.system.build.manual.manual" after I forgot
what it means I ask "Why do I need that second `.manual` there again?".
Doesn't happen with `config.system.build.manual.manualHTML`.
This is taken from the 18.09 change, which was reverted on release-18.09
but not master. The now-false 18.09 release notes were just removed from
master in 29854e2426, but since the
underlying change is still there, release notes for 19.03 are warranted.
This commit takes the now-reverted release notes and reuses them for
that.
Fixed minor issue where kube-addon manager complaints about
/opt/namespace.yaml missing.
Added release notes with reference to Kubernetes 1.11 release notes.
closes#43882
This adds a release notes entry to make users (and especially
developers) aware so they no longer need to use </para><para> in option
descriptions as this is now done automatically on every two consecutive
newlines.
More details can be found in the commit message of f865d0feab.
Signed-off-by: aszlig <aszlig@nix.build>
What annoyed me for a long time was the fact, that in order to break
into a new paragraph, you need to insert </para><para> in the
description attribute of an option.
Now we will automatically create <para/> elements for every block that
is separated by two consecutive newlines.
I first tried to do this within options-to-docbook.xsl, but it turns
out[1] that this isn't directly possible with XSLT 1.0, so I added
another XSLT file that postprocesses the option descriptions that are
now enclosed in <nixos:option-description/> by options-to-docbook.xsl.
The splitting itself is a bit more involved, because we can't simply
split on every \n\n because we'd also split text nodes of elements, for
example:
<screen><![CDATA[
one line
another one
]]></screen>
This would create one <para/> element for "one line" and another for
"another line", which we obviously don't want because <screen/> is used
to display verbatim contents of what a user is seeing on the screen.
So what we do instead is splitting *only* the top-level text nodes
within the outermost <para/> and leave all elements as-is. If there are
more than one <para/> elements at the top-level, we simply don't process
it at all, because the description then already contains </para><para>.
https://www.mhonarc.org/archive/html/xsl-list/2012-09/msg00319.html
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @domenkozar
The instructions to install nixos behind a proxy were not clear. While
one could guess that setting http_proxy variables can get the install
rolling, one could end up with an installed system where the proxy
settings for the nix-daemon are not configured.
This commit updates the documentation with
1. steps to install behind a proxy
2. configure the global proxy settings so that nix-daemon can access
internet.
3. Pointers to use nesting.clone in case one has to use different proxy
settings on different networks.
Switch from slim to lightdm as the display-manager.
If plasma5 is used as desktop-manager use sdddm.
If gnome3 is used as desktop-manager use gdm.
Based on #12516
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
The server is not verified over the git:// transfer protocol. If you
clone a repository over git://, you should check if the latest commit's
hash is correct.
On the other hand, https:// will always verify the server automatically,
using certificate authorities.
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
This makes the command ‘nix-env -qa -f. --arg config '{skipAliases =
true;}'’ work in Nixpkgs.
Misc...
- qtikz: use libsForQt5.callPackage
This ensures we get the right poppler.
- rewrites:
docbook5_xsl -> docbook_xsl_ns
docbook_xml_xslt -> docbook_xsl
diffpdf: fixup
Kubernetes dashboard currently has cluster admin permissions,
which is not recommended.
- Renamed option "services.kubernetes.addons.dashboard.enableRBAC" to "services.kubernetes.addons.dashboard.rbac.enable"
- Added option "services.kubernetes.addons.dashboard.rbac.clusterAdmin", default = false.
- Setting recommended minimal permissions for the dashboard in accordance with https://github.com/kubernetes/dashboard/wiki/Installation
- Updated release note for 18.09.
- Added option 'cni.configDir' to allow for having CNI config outside of nix-store
Existing behavior (writing verbatim CNI conf-files to nix-store) is still available.
- Removed unused option 'apiserver.publicAddress' and changed 'apiserver.address' to 'bindAddress'
This conforms better to k8s docs and removes existing --bind-address hardcoding to 0.0.0.0
- Fixed c/p mistake in apiserver systemd unit description
- Updated 18.09 release notes to reflect changes to existing options
And fixed some typos from previous PR
- Make docker images for Kubernetes Dashboard and kube-dns configurable
Presents the options available (linuxManualConfig versus overriding
extraConfig, ignoreConfigErrors, autoModules, kernelPreferBuiltin.
For advanced hostPlatform customization refer to the commands shared by ericson1234 at
https://github.com/NixOS/nixpkgs/pull/33813 but it is too advanced to
put in the doc.
This script is used to automatically fix issues within xml documentation
files.
The script is *for now* intended to be used ad-hoc, and the commits to
be examined.
A future discussion will define whether:
* This commit and scripts are kept.
* The script is extended for common use.
The biggest issue right now with the script is that it *could* in theory
destroy a valid space-less varlistentry.
The script could, in practical use, be changed and extended to normalize
some parts of the XML files, mainly:
* A common quoting style for attributes
* Fix-up some weird formatting automatically that xmlformat doesn't
catch
- Added information regarding breaking changes to release note for 18.09
- Changed golang version comment in kubernetes package
- Added @johanot to maintainers list
* improve nix installation instructions
in the command
$ bash <(curl https://nixos.org/nix/install)
<(..) is a bashism. The documentation now show a command that does
not require to be executed by bash.
The manual still had a reference to an option that was already renamed
ages ago and a7ed44ccad made it 'visible'.
With the visible attribute set to false for extraKernelModules, the
option no longer appears in the manual and thus breaks the link from the
manual to the options.
This is easily fixed by referring to boot.initrd.kernelModules instead
of the obsolete option boot.initrd.extraKernelModules.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @rycee, @matthewbauer
This introduces an option that allows us to turn off stateful generation
of Diffie-Hellman parameters, which in some way is still "stateful" as
the generated DH params file is non-deterministic.
However what we can avoid with this is to have an increased surface for
failures during system startup, because generation of the parameters is
done during build-time.
Aside from adding a NixOS VM test it also restructures the type of the
security.dhparams.params option, so that it's a submodule.
A new defaultBitSize option is also there to allow users to set a
system-wide default.
I added a release notes entry that described what has changed and also
included a few notes for module developers using this module, as the
first usage already popped up in NixOS/nixpkgs#39507.
Thanks to @Ekleog and @abbradar for reviewing.
This is not only to make users aware of the changes but also to give a
heads up to developers which are using the module. Specifically if they
rely on security.dhparams.path only.
Signed-off-by: aszlig <aszlig@nix.build>
The following changes have been applied:
- the property `http.headers.X-Content-Type-Options` must a list of
strings rather than a serialized list
- instead of `/etc/docker/registry/config.yml` the configuration will be
written with `pkgs.writeText` and the store path will be used to run
the registry. This reduces the risk of possible impurities by relying
on the Nix store only.
- cleaned up the property paths to easy readability and reduce the
verbosity.
- enhanced the testcase to ensure that digests can be deleted as well
- the `services.docker-registry.extraConfig` object will be merged with
`registryConfig`
/cc @ironpinguin
As suggested in https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745
the versioning attributes in `lib` should be consistent to
`nixos/version` which implicates the following changes:
* `lib.trivial.version` -> `lib.trivial.release`
* `lib.trivial.suffix` -> `lib.trivial.versionSuffix`
* `lib.nixpkgsVersion` -> `lib.version`
As `lib.nixpkgsVersion` is referenced several times in `NixOS/nixpkgs`,
`NixOS/nix` and probably several user's setups. As the rename will cause
a notable impact it's better to keep `lib.nixpkgsVersion` as alias with
a warning yielded by `builtins.trace`.
- mkfs.fat needs `-n` to set a partition label, not `-L`.
- create /mnt/boot before mounting
- leave out detailed LVM example as advanced users already how to create
LVs while it is detracting for novices.
Re #38674
The `clementine` package is actually released under Apache license, but
requires the unfree `libspotify` package to build.
Now `nixpkgs.clementine` points to the free derivation and
`nixpkgs.clementineUnfree` has been introduced for the package bundled
with spotify support.
Fixes#38315
- `localSystem` is added, it strictly supercedes system
- `crossSystem`'s description mentions `localSystem` (and vice versa).
- No more weird special casing I don't even understand
TEMP
- Rectifies diverging CSS by combining
nixos/nixpkgs docs CSS
- Moves our custom Highlight.js loader in to
the hljs package
- Switches the nixos docs to use SVG
callouts too
The original idea behind this change (described in ticket #11064) was to
improve the assertions to avoid that users of the X server accidentally
forget to configure a DM or WM.
However this caused several issues with setups that require X, but no DM
or WM. The keymap testcases became instable as well as now disabling DMs
needs to be done explicitly.
(see https://github.com/NixOS/nixpkgs/pull/31268#issuecomment-347080036)
In the end the idea behind the change and #11064 was obviously a
mistake, so reverting it completely for now should be fine.
