There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
This will keep configuration configuring the size of the /boot partition
still build, while showing the deprecation warning.
In 99.9% of cases I assume ignoring the configuration is better, as the
sd-image builder already is pretty opinionated in that matter.
The slack, seemingly, accounted for more than the minimum required for
slack plus the two partitions.
This change makes the gap a somewhat abstracted amount, but is not
configurable within the derivation.
The current FAT32 partition is kept as it is required for the Raspberry
Pi family of hardware. It is where the firmware is kept.
The partition is kept bootable, and the boot files kept in there until
the following commits, to keep all commits of this series individually
bootable.
Up until now, the output has been the same for swap devices and swap
files:
{ device = "/var/swapfile"; }
Whereas for swap *files* it's easier to manage them declaratively in
configuration.nix:
{ device = "/var/swapfile"; size = 8192; }
(NixOS will create the swapfile, and later resize it, if the size
attribute is changed.)
With the assumption that swap files are specified in configuration.nix,
it's silly to output them to hardware-configuration.nix.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the board is
hung, while in reality it's likely resizing partitions.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the Raspberry Pi is
hung, while in reality it's likely resizing partitions.
Add "bcache" to boot.initrd.availableKernelModules if a bcache device is
detected.
This fixes a problem I've had one too many times: I install NixOS and
forget to add "bcache", resulting in an unbootable machine (until fixed
with Live CD). Now NixOS will do it for me.
cross-compilation of `btrfs-tools` is broken, and this usually needless dependency of each system closure on `btrfs-tools` prevents cross-compilation of whole system closures
Copy-paste from iso-image.nix
Besides the simplification, it should use `pkgs.buildPackages.squashfsTools` because it is used in `nativeBuildInputs` instead of incorrect `pkgs.squashfsTools` which was forced by `import'
Prior to this commit an installation over serial via syslinux would
involve:
1. setting bitrate to BIOS's bitrate (typically 115200)
2. setting bitrate to syslinux's bitrate (38400)
3. setting bitrate to stty's bitrate (115200)
By changing syslinux's bitrate to 115200, an installation over serial
is a smoother experience, and consistent with the GRUB2 installation
which is also 115200 bps.
[root@nixos:~]# stty
speed 115200 baud; line = 0;
-brkint ixoff iutf8
-iexten
In a future commit I will add default serial terminals to the syslinux
kernel lines.
If setting a root password using the `passwd` call in the
`nixos-install` script fails, it should be explained how set it manually
to ensure that nobody gets accidentally locked out of the system.
If our old Nix can’t evaluate the Nixpkgs channel, try the fallback
from the new channel /first/. That way we can upgrade Nix to a newer
version and support breaking changes to Nix (like seen in the upgrade
o Nix 2.0).
This change should be backported to older NixOS versions!
This hasn't been needed for a long time, even when `mutableUsers =
false`. Setting a uid manually is potentially risky since it could
collide with non-declarative user accounts. (We do check for
collisions between declarative accounts.)
Also simplified the argument parsing to write all currently supported
CLI options into a bash array and pass this to `nix-build`.
Also documented `--option` usage in the corresponding manpage.
I've been asked, on numerous occasions, by my students and others, how
to 'sudo' on NixOS.
Of course new users could read up in the manual on how to do that, or we
could make it more accessible for them by simply making it visible in
the default `configuration.nix` file.
Additionally, as raised in [1], replacing `guest` with something more
recognizable could be potentially beneficial to new users. I've
opted for `jane` for now.
[1]: https://github.com/NixOS/nixpkgs/pull/54519#issuecomment-457012223
There are situations where several filesystems reside on a single encrypted LUKS
device (e.g. when using BTRFS subvolumes).
Simply generating a `boot.init.luks.devices.NAME.device` entry for each mounted
filesystem will result in an error later when evaluating the nix expression in
`hardware-configuration.nix`.
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
cleanSource does not appear to work correctly in this case. The path
does not get coerced to a string, resulting in a dangling symlink
produced in channel.nix. Not sure why, but this
seems to fix it.
Fixes#51025.
/cc @elvishjericco
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
This, paired with the previous commit, ensures the channel won't be held
back from a kernel upgrade and a non-building sd image, while still
having a new-kernel variant available.
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
Previously I got the following error message:
```
error: opening file '/home/ma27/Projects/nixpkgs/nixos/modules/installer/default.nix': No such file or directory
```
Probably related to 6c68fbd4e1.
This reverts commit 10addad603, reversing
changes made to 7786575c6c.
NixOS scripts should be kept in the NixOS source tree, not in
pkgs. Moving them around is just confusing and creates unnecessary
code/history churn.
Move all the nixos-* scripts from the nixos distribution as real
packages in the pkgs/ package set.
This allows non-nixos users to run the script as well. For example,
deploying a remote machine with:
nixos-rebuild --target-host root@hostname --build-host root@hostname
The system variable is used from the (possibly polluted) shell
environment.
This causes nixos-install to fail in a nix-shell because the system
shell variable is automatically set to the current system (e.g.
x86_64-linux).
`nixos-option` basically handles two cases: the given option is either a
valid option defined using `mkOption` or an attribute set which contains
a set of options.
If none of the above cases is valid, `$1` is invalid. Unfortunatley the
script interpreted invalid options as an attribute set which rendered
shell failures when trying to evaluate the arguments.
First of all, `if names=$(attrNames ...)` resulted in `<PRIMOP>` as
`attrNames` simply evaluated `builtins.attrNames $result` which results
in a non-applied function with `$result` being empty. Trying to map over
this string using `nixMap` while applying `escapeQuotes` causes the bash
error as `eval echo "<PRIMOP>"` is invalid syntax.
Explicitly checking if `$result' contains a value (do we have an
attribute set?) and otherwise returning a warning and asking if $option
exists fixes the problem.
Fixes#48060
The problem was that the non-fatal warning was not omitted
from the output when constructing a nix expression.
Now it seems OK for me. When return code is OK,
the warnings don't get passed anywhere, but I expect
that won't matter for this utility. Fatal errors are still shown.
Because when I see "config.system.build.manual.manual" after I forgot
what it means I ask "Why do I need that second `.manual` there again?".
Doesn't happen with `config.system.build.manual.manualHTML`.
The instructions to install nixos behind a proxy were not clear. While
one could guess that setting http_proxy variables can get the install
rolling, one could end up with an installed system where the proxy
settings for the nix-daemon are not configured.
This commit updates the documentation with
1. steps to install behind a proxy
2. configure the global proxy settings so that nix-daemon can access
internet.
3. Pointers to use nesting.clone in case one has to use different proxy
settings on different networks.
This is a 277K (as of right now) addition that can greatly help in some
last recourse scenarios. The specific rEFInd setup will not be able to
boot the installer image, but this is not why it has been added. It has
been added to make use of its volumes scanning capabilities to boot
existing EFI images on the target computer, which is sometimes necessary
with buggy EFI. While is isn't NixOS's job to fix buggy EFI, shipping
this small bit with the installer will help the unlucky few.
Example scenario: two wildly different EFI implementation I have
encountered have fatal flaws in which they sometimes will lose all the
settings, this includes boot configuration. This is compounded by the
fact that the two specific and distinct implementation do not allow
manually adding ESP paths from their interface. The only recourse is to
let the EFI boot the default paths, EFI/boot/boot{platform}.efi, which
is not a default location used by the NixOS bootloaders. rEFInd is able
to scan the volumes and detect the existing efi bootloaders, and boot
them successfully.
Following up https://github.com/NixOS/nixpkgs/pull/23665
Bootable USB-drives are not limited to ISO-images, there can be "normal" MBR/GPT-partitioned disk connected via USB-rack.
Also, "uas" implies "usb-storage", so there is no need to mention both.
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
When running e.g. `nixos-option boot.kernelPackages` I get an output
like this on the current unstable channel (18.09pre144959.be1461fc0ab):
```
$ nixos-option boot.kernelPackages
Value:
*exit 1*
```
This is fairly counter-intuitive as I have no clue what might went
wrong. `strace` delivers an output like this:
```
read(3, "error: Package \342\200\230cryptodev-linu"..., 128) = 128
read(3, "ux/cryptodev/default.nix:22 is m"..., 128) = 128
read(3, "lowBroken = true; }\nin configura"..., 128) = 128
read(3, "you can add\n { allowBroken = tr"..., 128) = 128
read(3, "n)\n", 128) = 3
read(3, "", 128) = 0
```
`nixos-option` evaluates the system config using `nix-instantiate` which
might break when the evaluation fails (e.g. due to broken or unfree
packages that are prohibited to evaluate by default). The script aborts
due to the shebang `@shell@ -e`.
In order to ensure that no unexpected
behavior occurs due to removing `-e` from the interpreter the easiest
way to work around this was to wrap `nix-instantiate` in `evalNix()`
with a `set +e`. The function checks the success of the evaluation with
`$?` in the end. Additionally `evalNix` shouldn't break, if one
evaluation (e.g. the values that contain a package set by default) to
return additional information like a description.
With the change `nixos-option boot.kernelPackages` delivers the
following output for me:
```
Value:
error: Package ‘cryptodev-linux-1.9-4.14.52’ in /nix/store/47z2s8cwppymmgzw6n7pbcashikyk5jk-nixos/nixos/pkgs/os-specific/linux/cryptodev/default.nix:22 is marked as broken, refusing to evaluate.
Default:
{ __unfix__ = <LAMBDA>; acpi_call = <CODE>; amdgpu-pro = <CODE>; ati_drivers_x11 = <CODE>; batman_adv = <CODE>; bbswitch = <CODE>; bcc = <CODE>; beegfs-module = <CODE>; blcr = <CODE>; broadcom_sta = <CODE>; callPackage = <CODE>; cpupower = <CODE>; cryptodev = <CODE>; dpdk = <CODE>; e1000e = <CODE>; ena = <CODE>; evdi = <CODE>; exfat-nofuse = <CODE>; extend = <CODE>; facetimehd = <CODE>; fusionio-vsl = <CODE>; hyperv-daemons = <CODE>; ixgbevf = <CODE>; jool = <CODE>; kernel = <CODE>; lttng-modules = <CODE>; mba6x_bl = <CODE>; mwprocapture = <CODE>; mxu11x0 = <CODE>; ndiswrapper = <CODE>; netatop = <CODE>; nvidiaPackages = <CODE>; nvidia_x11 = <CODE>; nvidia_x11_beta = <CODE>; nvidia_x11_legacy304 = <CODE>; nvidia_x11_legacy340 = <CODE>; nvidiabl = <CODE>; odp-dpdk = <CODE>; openafs = <CODE>; openafs_1_8 = <CODE>; perf = <CODE>; phc-intel = <CODE>; pktgen = <CODE>; ply = <CODE>; prl-tools = <CODE>; recurseForDerivations = true; rtl8192eu = <CODE>; rtl8723bs = <CODE>; rtl8812au = <CODE>; rtl8814au = <CODE>; rtlwifi_new = <CODE>; sch_cake = <CODE>; spl = <CODE>; splLegacyCrypto = <CODE>; splStable = <CODE>; splUnstable = <CODE>; stdenv = <CODE>; sysdig = <CODE>; systemtap = <CODE>; tbs = <CODE>; tmon = <CODE>; tp_smapi = <CODE>; usbip = <CODE>; v4l2loopback = <CODE>; v86d = <CODE>; vhba = <CODE>; virtualbox = <CODE>; virtualboxGuestAdditions = <CODE>; wireguard = <CODE>; x86_energy_perf_policy = <CODE>; zfs = <CODE>; zfsLegacyCrypto = <CODE>; zfsStable = <CODE>; zfsUnstable = <CODE>; }
Example:
{ _type = "literalExample"; text = "pkgs.linuxPackages_2_6_25"; }
Description:
"This option allows you to override the Linux kernel used by\nNixOS. Since things like external kernel module packages are\ntied to the kernel you're using, it also overrides those.\nThis option is a function that takes Nixpkgs as an argument\n(as a convenience), and returns an attribute set containing at\nthe very least an attribute <varname>kernel</varname>.\nAdditional attributes may be needed depending on your\nconfiguration. For instance, if you use the NVIDIA X driver,\nthen it also needs to contain an attribute\n<varname>nvidia_x11</varname>.\n"
Declared by:
"/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/system/boot/kernel.nix"
Defined by:
"/home/ma27/Projects/nixos-config/system/boot.nix"
```
This partially reverts a change from e88f28965a
which removed the `mount --rbind /sys`.
While true that the activation scripts will mount `sysfs` at `/sys`,
none of the mountpoints lower in the `/sys` tree are handled by the
activation script, which includes `efivarfs`.
This fixes#38477 since it ensures the presence of `efivarfs` in the
`/sys` tree, which is why the systemd-boot installation failed.
Nothing probably uses this, but let's be pedantic and have the
pre-included channel on the install media be as close as possible to
what 'nix-channel --update' will give them.
The only remaining difference is that the channel adds programs.sqlite,
which is fundamentally unfixable.
Because it improves out-of-the-box user experience a lot (IMHO).
(zsh completion is already on by default.)
Remove "programs.bash.enableCompletion = true" from
nixos-generate-config.pl, which feels superflous now.
