This reverts commit 8f177612b1.
Attempting to start any service from udev when systemd-udev-settle is
used at all hangs the boot for 2min. See issue #107341.
Prior to this commit, installation over serial console would requiring
manually having to modify the kernel modeline, as described in
https://github.com/NixOS/nixpkgs/issues/58198 .
This is unnecessarily fiddly, so this commit adds a syslinux boot
entry that has serial enabled.
GRUB already has a serial console entry:
2c07a0800a/nixos/modules/installer/cd-dvd/iso-image.nix (L311-L317)
Why 115200 bps? This is already used in other places, e.g. https://github.com/NixOS/nixpkgs/pull/58196
I tested this change by building the image, booting the image, and
observing the boot process over serial:
$ cd nixos/
$ nix-build -A config.system.build.isoImage -I nixos-config=modules/installer/cd-dvd/installation-cd-minimal.nix default.nix
$ sudo cp /nix/store/arcl702c3z8xlndlvnfplq9yhixjvs9k-nixos-20.09pre-git-x86_64-linux.iso/iso/nixos-20.09pre-git-x86_64-linux.iso /dev/sdb
$ picocom -b 115200 /dev/ttyUSB0
`nixos-rebuild build-vm-with-bootloader` currently fails with the
default NixOS EFI configuration:
$ cat >configuration.nix <<EOF
{
fileSystems."/".device = "/dev/sda1";
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
}
EOF
$ nixos-rebuild build-vm-with-bootloader -I nixos-config=$PWD/configuration.nix -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/nixos-20.09.tar.gz
[...]
insmod: ERROR: could not insert module /nix/store/1ibmgfr13r8b6xyn4f0wj115819f359c-linux-5.4.83/lib/modules/5.4.83/kernel/fs/efivarfs/efivarfs.ko.xz: No such device
mount: /sys/firmware/efi/efivars: mount point does not exist.
[ 1.908328] reboot: Power down
builder for '/nix/store/dx2ycclyknvibrskwmii42sgyalagjxa-nixos-boot-disk.drv' failed with exit code 32
[...]
Fix it by setting virtualisation.useEFIBoot = true in qemu-vm.nix, when
efi is needed.
And remove the now unneeded configuration in
./nixos/tests/systemd-boot.nix, since it's handled globally.
Before:
* release-20.03: successful build, unsuccessful run
* release-20.09 (and master): unsuccessful build
After:
* Successful build and run.
Fixes https://github.com/NixOS/nixpkgs/issues/107255
Fixes that `containers.<name>.extraVeths.<name>` configuration was not
always applied.
When configuring `containers.<name>.extraVeths.<name>` and not
configuring one of `containers.<name>.localAddress`, `.localAddress6`,
`.hostAddress`, `.hostAddress6` or `.hostBridge` the veth was created,
but otherwise no configuration (i.e. no ip) was applied.
nixos-container always configures the primary veth (when `.localAddress`
or `.hostAddress` is set) to be the containers default gateway, so
this fix is required to create a veth in containers that use a different
default gateway.
To test this patch configure the following container and check if the
addresses are applied:
```
containers.testveth = {
extraVeths.testveth = {
hostAddress = "192.168.13.2";
localAddress = "192.168.13.1";
};
config = {...}:{};
};
```
This means that all systems running from master will trigger
new certificate creation on next rebuild. Race conditions around
multiple account creation are fixed in #106857, not this commit.
Previously the .enable option was used to encode the condition as well,
which lead to some oddness:
- In order to encode an assertion, one had to invert it
- To disable a check, one had to mkForce it
By introducing a separate .check option this is solved because:
- It can be used to encode assertions
- Disabling is done separately with .enable option, whose default can be
overridden without a mkForce
Since slurm-20.11.0.1 the dbd server requires slurmdbd.conf to be
in mode 600 to protect the database password. This change creates
slurmdbd.conf on-the-fly at service startup and thus avoids that
the database password ends up in the nix store.
It's very surprising that services.tor.client.enable would set
services.privoxy.enable. This violates the principle of least
astonishment, because it's Privoxy that can integrate with Tor, rather
than the other way around.
So this patch moves the Privoxy Tor integration to the Privoxy module,
and it also disables it by default. This change is documented in the
release notes.
Reported-by: V <v@anomalous.eu>
configuration.nix(1) states
users.extraUsers.<name>.createHome
[...] If [...] the home directory already exists but is not
owned by the user, directory owner and group will be changed to
match the user.
i.e. ownership would change only if the user mismatched; the code
however ignores the owner, it is sufficient to enable `createHome`:
if ($u->{createHome}) {
make_path($u->{home}, { mode => 0700 }) if ! -e $u->{home};
chown $u->{uid}, $u->{gid}, $u->{home};
}
Furthermore, permissions are ignored on already existing directories and
therefore may allow others to read private data eventually.
Given that createHome already acts as switch to not only create but
effectively own the home directory, manage permissions in the same
manner to ensure the intended default and cover all primary attributes.
Avoid yet another configuration option to have administrators make a
clear and simple choice between securely managing home directories
and optionally defering management to own code (taking care of custom
location, ownership, mode, extended attributes, etc.).
While here, simplify and thereby fix misleading documentation.
Not everyone has a suitable remote builder set up, so the cross-compilation
tests that _include_ running the result are separate. That way, most people
can run the majority of the test suite without the extra setup.
Docker (via containerd) and the the OCI Image Configuration imply and
suggest, respectfully, that the architecture set in images matches those
of GOARCH in the Go Language document.
This changeset updates the implimentation of getArch in dockerTools to
return GOARCH values, to satisfy Docker.
Fixes: #106695
Mailman can now work with MTAs other than Postfix. You'll have to configure
it yourself using the options in `services.mailman.settings.mta`.
This addition is reflected in the release notes for 21.03.
This partially reverts bf3d3dd19b.
I don't know why we weren't getting a default logfile back then but Xorg
definitely provides one now ($XDG_DATA_HOME for regular users and /var/log for
root, see `man Xorg`)
Only set Before=display-manager.service if it is actually present.
On headless systems, `systemctl list-units --state not-found` will
otherwise show display-manager.service.
Reported-In: https://github.com/NixOS/nixpkgs/issues/88597
Dnscrypt-proxy needs some options to be set before it can do anything useful.
Currently, we only apply what the user configured which, by default, is nothing.
This leads to the dnscrypt-proxy2 service failing to start when you only set
`enable = true;` which is not a great user experience.
This patch makes the module take the example config from the upstream repo as a
base on top of which the user-specified settings are applied (it contains sane
defaults).
An option has been added to restore the old behaviour.
`file_exists` also returns `FALSE` if the file is in a directory that
can't be read by the user. This e.g. happens if permissions for
`nixops(1)`-deployment keys aren't configured correctly.
This patch improves the error message for invalid files to avoid
confusion[1].
[1] https://discourse.nixos.org/t/nixops-deploy-secrets-to-nextcloud/10414/4
This patch:
* Removes an invalid/useless classpath element;
* Removes an unnecessary environment variable;
* Creates the required '/version-2' data subdirectory;
* Redirects audit logging to the "console" (systemd) by default.
A big jump, but the structure hasn't changed much.
This recipe is still based on a binary release provided by upstream.
(It might be interesting to start doing our own builds at some point,
to split client from server, and/or to create packages for removed
"contribs" such as 'zooInspector'. Upstream intends to further slim
down its release tarballs as most deployments only need specific assets.)
Unbound throws the following error:
--8<---------------cut here---------------start------------->8---
error: failed to list interfaces: getifaddrs: Address family not supported by protocol
fatal error: could not open ports
--8<---------------cut here---------------end--------------->8---
The solution is pulled from upstream:
https://github.com/NLnetLabs/unbound/pull/351
Unfortunately, I had a use-case where `services.nginx.config` was
necessary quite recently. While working on that config I had to look up
the module's code to understand which options can be used and which
don't.
To slightly improve the situation, I changed the documentation like
this:
* Added `types.str` as type since `config` is not mergeable on purpose.
It must be a string as it's rendered verbatim into `nginx.conf` and if
the type is `unspecified`, it can be confused with RFC42-like options.
* Mention which config options that don't generate config in
`nginx.conf` are NOT mutually exclusive.
There was some issues with the fallback to passive mode on 2.3, but on
2.4 adaptive mode is always enabled upstream and thermald will fallback
to passive if necessary.
a6e68a65b5/data/thermald.service.in (L9)
This replaces `concatStringsSep "\n"` with the proper generator to make sure
that the generated configuration file ends with a trailing `\n`, which is
required by ssmtp's picky configuration parser to take the last configuration
key into account.
GitHub: closes#105704
Since #104094 (d22b3ed4bc), NixOS is
using the unified cgroup hierarchy by default (aka cgroupv2).
This means the blkio controller isn't there, so we should test for
something else (e.g. the presence of the io controller).
Fixes#105581.
This simplifies testing changes to the tailscale service on a local
machine. You can use this as such:
```nix
let
tailscale_patched = magic {};
in {
services.tailscale = {
enable = true;
package = tailscale_patched;
};
};
```
Signed-off-by: Christine Dodrill <me@christine.website>
We're really setting users up on the wrong path if we tell them to
nix-env -iA immediately after installing. Instead, let's just
reassure them that installing software will be covered in due course
in the manual, to encourage them to keep reading.
Previously this option was thought to be necessary to avoid infinite
recursion, but it actually isn't, since the check evaluation isn't fed
back into the module fixed-point.
I've also removed PrivateTmp = true because this is implied by dynamic user.
I've left ProtectHome = true because I believe this is stronger than
ProtectHome = "read-only" which DynamicUser implies.
This allows capping the total amount of memory that will be used for
zram-swap, in addition to the percentage-based calculation, which is
useful when blanket-applying a configuration to many machines.
This is based off the strategy used by Fedora for their rollout of
zram-swap-by-default in Fedora 33
(https://fedoraproject.org/wiki/Changes/SwapOnZRAM), which caps the
maximum amount of memory used for zram at 4GiB.
In future it might be good to port this to the systemd zram-generator,
instead of using this separate infrastructure.
This resolves issue #101963.
When the service is started and no interface is ready yet, wpa_supplicant
is being exec'd with no `-i` flags, thus failing. Once the interfaces
are ready, the udev rule would fire but wouldn't restart the unit because
it wasn't currently running (see systemctl(1) try-restart).
The solution is to exit (with a clear error message) but always restart
wpa_supplicant when the interfaces are modified.
This release replaces the libpulseaudio shim with a pipewire module that acts as a fake pulseaudio server along with a systemd service that loads that module on demand.
