Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/tini/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/h0h2qyxwrvsjy47m1xyv7sxzd2j0ilsi-tini-0.18.0/bin/tini -h’ got 0 exit code
- ran ‘/nix/store/h0h2qyxwrvsjy47m1xyv7sxzd2j0ilsi-tini-0.18.0/bin/tini --version’ and found version 0.18.0
- found 0.18.0 with grep in /nix/store/h0h2qyxwrvsjy47m1xyv7sxzd2j0ilsi-tini-0.18.0
- directory tree listing: https://gist.github.com/c992fd0a24dfc0365d6b62ac567d395c
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/singularity/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/0rcn1kn4j7rmr0qn314g28vpa4xf230d-singularity-2.4.6/bin/singularity -h’ got 0 exit code
- ran ‘/nix/store/0rcn1kn4j7rmr0qn314g28vpa4xf230d-singularity-2.4.6/bin/singularity --help’ got 0 exit code
- ran ‘/nix/store/0rcn1kn4j7rmr0qn314g28vpa4xf230d-singularity-2.4.6/bin/singularity help’ got 0 exit code
- found 2.4.6 with grep in /nix/store/0rcn1kn4j7rmr0qn314g28vpa4xf230d-singularity-2.4.6
- directory tree listing: https://gist.github.com/e2f21872e885760acf461b07dd5b4f86
This obsoletes two of the included patches, one of them RISC-V specific,
since they've been picked up by upstream.
This build has been confirmed as being able to build and run an (extremely
recent) RISC-V Fedora 28 Rawhide image, available from:
https://fedorapeople.org/groups/risc-v/disk-images/
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/containerd/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd -h’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd --help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-release -h’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-release --help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-release help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-stress -h’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-stress --help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/containerd-stress help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/ctr -h’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/ctr --help’ got 0 exit code
- ran ‘/nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3/bin/ctr help’ got 0 exit code
- found 1.0.3 with grep in /nix/store/qmgzfad2cazgv7j1k31pqs512b59b8hp-containerd-1.0.3
- directory tree listing: https://gist.github.com/b830fb8c24834f83e627fd6d567eae87
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/singularity/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/893zy5r9ih8lp9p24s9l198jdjdwadj4-singularity-2.4.5/bin/singularity -h` got 0 exit code
- ran `/nix/store/893zy5r9ih8lp9p24s9l198jdjdwadj4-singularity-2.4.5/bin/singularity --help` got 0 exit code
- ran `/nix/store/893zy5r9ih8lp9p24s9l198jdjdwadj4-singularity-2.4.5/bin/singularity help` got 0 exit code
- ran `/nix/store/893zy5r9ih8lp9p24s9l198jdjdwadj4-singularity-2.4.5/bin/singularity -v` and found version 2.4.5
- found 2.4.5 with grep in /nix/store/893zy5r9ih8lp9p24s9l198jdjdwadj4-singularity-2.4.5
- directory tree listing: https://gist.github.com/f42298f39e3c1c4832de9817cc1fc5bf
And also build in parallel.
I don't understand why we manually tediously link every single directory
from the source, but I don't want to investigate too much.
Bump lkl version to latest that includes merge of Linux 4.15 and fix for
an issue where cptofs wasn't returning failure when image size was too
small and file copying failed with:
error writing file: No space left on device
(see lkl/linux#427)
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/p41wb0fqnvn4bx6jjs7hs98xlrzp8s79-tini-0.17.0/bin/tini -h` got 0 exit code
- ran `/nix/store/p41wb0fqnvn4bx6jjs7hs98xlrzp8s79-tini-0.17.0/bin/tini --version` and found version 0.17.0
- ran `/nix/store/p41wb0fqnvn4bx6jjs7hs98xlrzp8s79-tini-0.17.0/bin/tini -h` and found version 0.17.0
- found 0.17.0 with grep in /nix/store/p41wb0fqnvn4bx6jjs7hs98xlrzp8s79-tini-0.17.0
- found 0.17.0 in filename of file in /nix/store/p41wb0fqnvn4bx6jjs7hs98xlrzp8s79-tini-0.17.0
Semi-automatic update. These checks were performed:
- built on NixOS
- found 1.11.0 with grep in /nix/store/m55my69q0dc6rbvf7sfz3mln7vca1d53-seabios-1.11.0
- found 1.11.0 in filename of file in /nix/store/m55my69q0dc6rbvf7sfz3mln7vca1d53-seabios-1.11.0
cc "@tstrobel"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 2.4 with grep in /nix/store/5p43l2r5y6m0sdpyxwcwiv381ycglami-remotebox-2.4
- found 2.4 in filename of file in /nix/store/5p43l2r5y6m0sdpyxwcwiv381ycglami-remotebox-2.4
The AArch64 build fails after trying to pull in tmmintrin.h:
```
../common/memcpySSE.h:24:23: fatal error: tmmintrin.h: No such file or directory
#include <tmmintrin.h>
^
compilation terminated.
make: *** [Makefile:29: .build/renderers/opengl.o] Error 1
```
Which are SSSE3 intrinsics unsupported on ARM. This package also likely would
not be useful on ARM, as it requires KVM and a compatible KVM guest running
the frame relay (usually Windows).
Upstream changes without issue IDs:
* GUI: fixed occasional screen corruption when host screen resolution
is changed
* User interface: increase proposed disk size when creating new VMs for
Windows 7 and newer
* User interface: various improvements for high resolution screens
* VMM: Fixed problems using 256MB VRAM in raw-mode VMs
* Audio: implemented support for audio playback and recording for macOS
guests
* Audio: further timing improvements for Windows 10 guests
* Linux hosts: fixed problem accessing mini-toolbar under XFCE
The full changelog including issue IDs can be found at:
https://www.virtualbox.org/wiki/Changelog#v6
What was not mentioned in the changelog is that this release fixes
compiling the VirtualBox modules against kernel 4.15, which was added in
commit 61043ad4d1.
Tested this by running all of the tests in nixos/tests/virtualbox.nix.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @flokli, @svanderburg
[...]
make modules -C /nix/store/h1vzl6bq4wif3m8dd1bw2p3fv4shjg3n-linux-4.14.9-dev/lib/modules/4.14.9/build EXTRA_CFLAGS=-Werror-implicit-function-declaration M=/tmp/nix-build-spl-kernel-2017-11-16-4.14.9.drv-0/source/build
/nix/store/h1vzl6bq4wif3m8dd1bw2p3fv4shjg3n-linux-4.14.9-dev/lib/modules/4.14.9/source/Makefile:939: *** "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel". Stop.
This patch introduces kernel.moduleBuildDependencies to avoid the logic "stdenv.lib.optional (stdenv.lib.versionAtLeast kernel.version "4.14") libelf" in multiple places.
[dezgeg did some minor tweaks on top]
* $out/bin/qemu-kvm should point to qemu-system-aarch64 on aarch64, libvirt expect it
* makeWrapper codes are separated as some architectures might require additional command flags (https://github.com/NixOS/nixpkgs/issues/31606#issuecomment-349675127)
* x86_64-on-i686 is not a native emulation and not supported by KVM, so it is removed from the list
Upstream changes without issue IDs:
* User interface: various improvements for high resolution screens
* User interface: added functionality to duplicate optical and floppy
images
* User interface: various improvements for the virtual media manager
* VMM: fixed emulation so that Plan 9 guests can start once more (5.1.0
regression)
* Storage: fixed regression breaking iSCSI
* Audio: added HDA support for more exotic guests (e.g. Haiku)
* Serial: fixed hanging I/O when using named pipes on Windows (5.2.0
regression)
* Serial: fixed broken communication with certain devices on Linux
hosts
* USB/OHCI: improved behavior so that the controller state after a VM
reset is closer to the initial state after VM start
* EFI: fixed HFS+ driver which in rare cases failed to access most
files on a volume
* Shared clipboard: fixed hang with OS X host and Linux guest
* Linux hosts: fixed kernel module compilation and start failures with
Linux kernel 4.14
* X11 hosts: better handle WM_CLASS setting
* Linux guests: fixed kernel module compilation and other problems with
Linux kernel 4.14
* Linux guests: fixed various 5.2.0 regressions
* Bridged networking: fixed duplicate EtherType in VLAN/priority tags
on Linux (5.2.0 regression)
The full changelog including issue IDs can be found at:
https://www.virtualbox.org/wiki/Changelog
Aside from just bumping the version number I also had to strip 3 levels
of the paths included in the guest-additions patches, because the
version was hardcoded in there and the patches still apply as-is.
I've re-added the stripped path using patchFlags and the -d option of
the patch utility.
Tested this by running all of the tests in the "virtualbox" NixOS VM
test module, here is the URL to the finished evaluation on my Hydra:
https://headcounter.org/hydra/eval/380191
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @NeQuissimus, @orivej, @etu, @vcunat
Issue: https://github.com/NixOS/nixpkgs/issues/31640
Issue: https://github.com/NixOS/nixpkgs/pull/31037
