It uses import-from-derivation, which is a bad thing, because this
causes hydra-evaluator to build Cassandra at evaluation time.
$ nix-instantiate nixos/release.nix -A tests.cassandra.i686-linux --dry-run
error: cannot read ‘/nix/store/c41blyjz6pfvk9fnvrn6miihq5w3j0l4-cassandra-2.0.16/conf/cassandra-env.sh’, since path ‘/nix/store/0j9ax4z8xhaz5lhrwl3bwj10waxs3hgy-cassandra-2.0.16.drv’ is not valid, at /home/eelco/Dev/nixpkgs/nixos/modules/services/databases/cassandra.nix:373:11
Also, the module is a mess (bad option descriptions, poor indentation,
a gazillion options where a generic "config" option would suffice, it
opens ports in the firewall, it sets vm.swappiness, ...).
The module will configure a Cassandra server with common options being
tweakable. Included is also a test which will spin up 3 nodes and
verify that the cluster can be formed, broken, and repaired.
With these changes, a container can have more then one veth-pair. This allows for example to have LAN and DMZ as bridges on the host and add dedicated containers for proxies, ipv4-firewall and ipv6-firewall. Or to have a bridge for normal WAN, one bridge for administration and one bridge for customer-internal communication. So that web-server containers can be reached from outside per http, from the management via ssh and can talk to their database via the customer network.
The scripts to set up the containers are now rendered several times instead of just one template. The scripts now contain per-container code to configure the extra veth interfaces. The default template without support for extra-veths is still rendered for the imperative containers.
Also a test is there to see if extra veths can be placed into host-bridges or can be reached via routing.
GoCD is an open source continuous delivery server specializing in advanced workflow
modeling and visualization. Update maintainers list to include swarren83. Update
module list to include gocd agent and server module. Update packages list to include
gocd agent and server package. Update version, revision and checksum for GoCD
release 16.5.0.
We already have a small regression test for #15226 within the swraid
installer test. Unfortunately, we only check there whether the md
kthread got signalled but not whether other rampaging processes are
still alive that *should* have been killed.
So in order to do this we provide multiple canary processes which are
checked after the system has booted up:
* canary1: It's a simple forking daemon which just sleeps until it's
going to be killed. Of course we expect this process to not
be alive anymore after boot up.
* canary2: Similar to canary1, but tries to mimick a kthread to make
sure that it's going to be properly killed at the end of
stage 1.
* canary3: Like canary2, but this time using a @ in front of its
command name to actually prevent it from being killed.
* kcanary: This one is a real kthread and it runs until killed, which
shouldn't be the case.
Tested with and without 67223ee and everything works as expected, at
least on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This partially reverts f2d24b9840.
Instead of disabling the channels via removing the channel mapping from
the tests themselves, let's just explicitly reference the stable test in
release.nix. That way it's still possible to run the beta and dev tests
via something like "nix-build nixos/tests/chromium.nix -A beta" and
achieve the same effect of not building beta and dev versions on Hydra.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It's not the job of Nixpkgs to distribute beta versions of upstream
packages. More importantly, building these delays channel updates by
several hours, which is bad for our security fix turnaround time.
The Nix store squashfs is stored inside the initrd instead of separately
(cherry picked from commit 976fd407796877b538c470d3a5253ad3e1f7bc68)
Signed-off-by: Domen Kožar <domen@dev.si>
A small test which checks whether tasks can be synced using the
Taskserver.
It doesn't test group functionality because I suspect that they're not
yet implemented upstream. I haven't done an in-depth check on that but I
couldn't find a method of linking groups to users yet so I guess this
will get in with one of the text releases of Taskwarrior/Taskserver.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
A testcase each for
- declarative ipv6-only container
Seems odd to define the container IPs with their prefix length attached.
There should be a better way…
- declarative bridged container
Also fix the ping test by waiting for the container to start
When the ping was executed, the container might not have finished starting. Or
the host-side of the container wasn't finished with config. Waiting for
2 seconds in between fixes this.
I had the basic version of this laying around for some while but didn't
continue on it. Originally it was for testing support for the Neo layout
introduced back then (8cd6d53).
We only test the first three Neo layers, because the last three layers
are largely comprised of special characters and in addition to that the
support for the VT keymap seems to be limited compared to the Xorg
keymap.
Yesterday @NicolasPetton on IRC had troubles with the Colemak layout
(IRC logs: http://nixos.org/irc/logs/log.20160330, starting at 16:08)
and I found that test again, so I went for improving and adding to
<nixpkgs>.
While the original problem seemed to be related to GDM, we can still add
another subtest that checks whether GDM correctly applies the keyboard
layout. However I don't have a clue how to properly configure the
keyboard layout on GDM, at least not within the NixOS configuration.
The main goal of this test is not to test a complete set of all key
mappings but to check whether the keymap is loaded and working at all.
It also serves as an example for NixOS keyboard configurations.
The list of keyboard layouts is by no means complete, so everybody is
free to add their own to the test or improve the existing ones.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Probably not many people care about i686-linux any more, but building
all these images is fairly expensive (e.g. in the worst case, every
Nixpkgs commit would trigger a few gigabytes of uploads to S3).
Previously this was done in three derivations (one to build the raw
disk image, one to convert to OVA, one to add a hydra-build-products
file). Now it's done in one step to reduce the amount of copying
to/from S3. In particular, not uploading the raw disk image prevents
us from hitting hydra-queue-runner's size limit of 2 GiB.
This splits a few NixOS tests (namely Chromium, VirtualBox and the
networking tests) into several subtests that are exposed via attributes.
The networking tests were already split up but they didn't expose an
attribute set of available tests but used a function attribute to
specify the resulting test instead.
A new function callSubTests in nixos/release.nix is now responsible for
gathering subtests, which is also used for the installer and boot tests.
The latter is now placed in a tests.boot.* namespace rather than
"polluting" the tests attribute set with its subtest.
This makes it easier to test just a specific channel rather than to
force testing all builds down the users/testers throat. Especially this
makes it easier to test NixOS channel upgrades only against the Chromium
stable channel instead of just removing the beta/dev channels from the
tests entirely (as done in 69ec09f38a).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Should clean up a lot of these redundant lines for various sub-tests.
Note that the tests.boot* are now called tests.boot.boot*, but otherwise
all the test attribute names should stay the same.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Cc: @wkennington
Cc: @bobvanderlinden
This should de-clutter the various redundant lines of callTest's on
subtests so that every main test file should have only one line with a
callSubTests instead.
Overrides work the same way as callTest, except that if the system
attribute is explicitly specified we do not generate attributes for all
available systems.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Now subtests are separate derivations, because the individual tests do
not depend on state from previous test runs.
This has the advantage that it's easier to run individiual tests and
it's also easier to pinpoint individual tests that randomly fail.
I ran all of these tests locally and they still succeed.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
The manuals are now evaluated with each derivation in `pkgs` (recursively)
replaced by a fake with path "\${pkgs.path.to.the.attribute}".
It isn't perfect, but it seems to cover a vast majority of use cases.
Caveat: even if the package is reached by a different means,
the path above will be shown and not e.g. `${config.services.foo.package}`.
As before, defaults created by `mkDefault` aren't displayed,
but documentation shouldn't (mostly) be a reason to use that anymore.
Note: t wouldn't be enough to just use `lib.mapAttrsRecursive`,
because derivations are also (special) attribute sets.
It serves as a regression test, because right now if you enable
networking.useNetworkd the default loopback interface doesn't get
assigned any IP addresses.
To be sure, I have bisected this and it has been introduced with the
update to systemd 228 in 1da87d4.
Only the "scripted" networking tests have to succeed in order to trigger
a channel update of nixos-unstable, so I'm leaving this test as broken
and we have to figure out next what's the *exact* reason for the
breakage.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We already have separate tests for checking whether the ISO boots
correctly, so it's not necessary to do that here. So now
tests/installer.nix just tests nixos-install, from a regular NixOS VM
that uses the host's Nix store. This makes running the tests more
convenient because we don't have to build a new ISO after every
change.
We want to avoid getting broken LUKS systems into the latest channel, so
let's ensure that the channel update won't happen if LUKS support is
broken again.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The i686-linux test has never worked and I wrote the VM test only on
x86_64-linux to verify whether hardening mode works. I don't know why it
fails on i686-linux, but that might be because the inner VirtualBox VM
we're starting during the VM test doesn't use hardware virtualization.
Closes#5708.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It has been removed by 71a197bc6e.
I'm reintroducing the test mainly because it actually *is* useful,
because right now, machines with mdraid will not boot. In order to
prevent such things from happening in the future, we should *not* remove
this VM test again.
If it really goes back to failing randomly, we should really try to fix
it instead of removing it again.
Of course it fails right now because of the mdraid bump in 7719f7f.
Also, if you want to have additional info about the reasons, have a look
at the commit message of 666cf992f0.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It now strictly evaluates all remaining attributes, preventing
unevaluated thunks that cannot be garbage-collected. It's also applied
to all jobs in Nixpkgs' release.nix.
This reduces hydra-eval-jobs' memory consumption on the 14.12
release-combined jobset from 5.1 GB to 2.0 GB.
Currently just makes sure that by default it's possible to open a
terminal.
And exactly this should be the main point that might confuse users of i3
in NixOS, because i3 doesn't print a warning/error if it is unable to
start the terminal emulator.
Thanks to @waaaaargh for reporting this issue.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Currently it pretty much tests starting up virtual machines and just
shutting down afterwards, but for both VBoxManage and the VirtualBox
GUI.
This helps catching errors in hardened mode, however we still need to
test whether networking works the way intended (and I fear that this is
broken at the moment).
The VirtualBox VM is _not_ using hardware virtualization support (thus
we use system = "i686-linux", because x86_64 has no emulation support),
because we're already within a qemu VM, which means it's going to be
slow as hell (that's why I've written own subs just for testing
startup/shutdown/whatnot with respective timeouts).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
- Create container nixos profile
- Create lxc-container nixos config using container nixos profile
- Docker nixos image, use nixos profile for its base config
Currently, the test is only for testing the user namespace sandbox and
even that isn't very representative, because we're running the tests as
root.
But apart from that, we should have functionality for opening/closing
windows and the main goal here is to get them as deterministic as
possible, because Chromium usually isn't very nice to chained xdotool
keystrokes.
And of course, the most important "test" we have here: We know at least
whether Chromium works _at_all_.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I'm really not sure whether these tests are actually run upstream,
because there are quite a few oddities which either are my fault by just
missing something important or upstream really doesn't bother to run
those tests.
One example of this are testDiskChunk1 and testDiskChunk2, which create
two non-existing partitions and tries to allocate them. Now, in
allocatePartitions(), the partedPartition attributes are reset to None
and shortly afterwards a for loop is expecting it to be NOT None.
So, for now I'm disabling these tests and will see if we stumble on them
during work on nixpart 1.0, so we're really sure whether it's my fault
or a real bug in blivet.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This causes some cruft to be uploaded (such as unit files) but it
ensures that every package used by the base system ends up in the
channel, not just environment.systemPackages.
(cherry picked from commit 4dfca8e14a5d1c2e62bb5ad267163a7a32ef872f)
Currently only tests basic resource record lookup against IPv4 and IPv6.
Nothing special yet, but probably enough for most setups.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit 469f22d717, reversing
changes made to 0078bc5d8f.
Conflicts:
nixos/modules/installer/tools/nixos-generate-config.pl
nixos/modules/system/boot/loader/grub/install-grub.pl
nixos/release.nix
nixos/tests/installer.nix
I tried to keep apparently-safe code in conflicts.
release.nix and release-combined.nix current hardcode the systems which
they are built for. This change introduces an argument to the
expressions called supportedSystems, which allows the builder to choose
which architectures he wants to build. By default, this uses the same
linux x86_64 and i686 architectures.
Now you can just say:
$ nix-build '<nixos/tests/login.nix>'
You can still get the driver script for interactive testing:
$ nix-build '<nixos/tests/login.nix>' -A driver
$ ./result/bin/nixos-test-driver
You can now run a test in the nixos/tests directory directly using
nix-build, e.g.
$ nix-build '<nixos/tests/login.nix>' -A test
This gets rid of having to add the test to nixos/tests/default.nix.
(Of course, you still need to add it to nixos/release.nix if you want
Hydra to run the test.)
It's now "<yy>.<mm>pre<commit-count>.<short-hash>"
(e.g. "13.10pre5678.gfedcba") for the unstable branch, and
"<yy>.<mm>.<commit-count>.<short-hash>" (e.g. "13.10.5678.gfedcba")
for stable branches.
