Personal information management application that provides integrated mail,
calendaring and address book functionality
https://wiki.gnome.org/Apps/Evolution
This overhauls the Datadog module a bit to be much more useful. In
particular, it adds support for nginx and postgresql monitoring
integrations to dd-agent. These have to exist in separate files under
/etc/dd-agent, so the module just exposes then as separate options. In
the future, more integrations could be added this way.
In the process of doing this, I also had to rename the dd-agent user to
datadog. Note the UIDs did not change, so this is strictly backwards
compatible. The reason for this is to make it easier to create a
'datadog' postgres user with access to pg_stats, as 'dd-agent' typically
isn't a valid username. This allows the out of the box configurations to
be used.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Previously all card-specific stuff was scattered across xserver.nix
and opengl.nix, which is ugly. Now it can be kept together in a single
card-specific module. This required the addition of a few internal
options:
- services.xserver.drivers: A list of { name, driverName, modules,
libPath } sets.
- hardware.opengl.package: The OpenGL implementation. Note that there
can be only one OpenGL implementation at a time in a system
configuration (i.e. no dynamic detection).
- hardware.opengl.package32: The 32-bit OpenGL implementation.
Fixes#2379.
The new name was a misnomer because the values really are X11 video
drivers (e.g. ‘cirrus’ or ‘nvidia’), not OpenGL implementations. That
it's also used to set an OpenGL implementation for kmscon is just
confusing overloading.
The Tarsnap module is now far more flexible, allowing individual
archives with individual options to be specified at will, allowing
granular backup schedules, etc.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This fixes several problems in the dhcpcd service:
* A segfault during startup, due to a race with udev (dhcpcd would get
an ADD event from udev, causing it to re-add an interface that it
already had, leading to a segfault later on).
* A hang/segfault processing "dhcpcd rebind" (which NixOS calls after
waking up from suspend).
Also, add "lo" to the list of ignored interfaces. It usually ignores
"lo", but apparently not when it gets an ADD event from udev.
By enabling ‘services.openssh.startWhenNeeded’, sshd is started
on-demand by systemd using socket activation. This is particularly
useful if you have a zillion containers and don't want to have sshd
running permanently. Note that socket activation is not noticeable
slower, contrary to what the manpage for ‘sshd -i’ says, so we might
want to make this the default one day.
This causes OpenVPN services to reach the "active" state when the VPN
connection is up (i.e., after OpenVPN prints "Initialization Sequence
Completed"). This allows units to be ordered correctly after openvpn-*
units, and makes systemctl present a password prompt:
$ start openvpn-foo
Enter Private Key Password: *************
(I first tried to implement this by calling "systemd-notify --ready"
from the "up" script, but systemd-notify is not reliable.)
The ability for unprivileged users to mount external media is useful
regardless of the desktop environment. Also, since udisks2 is
activated on-demand, it doesn't add any overhead if you're not using it.
This led to the container test failing, which made no sense
whatsoever, until I realized nix-daemon.socket creates the socket
directory as a side effect, which systemd-nspawn then bind-mounts.
http://hydra.nixos.org/build/10397575
This has some advantages:
* You get ssh-agent regardless of how you logged in. Previously it was
only started for X11 sessions.
* All sessions of a user share the same agent. So if you added a key
on tty1, it will also be available on tty2.
* Systemd will restart ssh-agent if it dies.
* $SSH_AUTH_SOCK now points to the /run/user/<uid> directory, which is
more secure than /tmp.
For bonus points, we should patch ssh-agent to support socket-based
activation...
If you define a unit, and either systemd or a package in
systemd.packages already provides that unit, then we now generate a
file /etc/systemd/system/<unit>.d/overrides.conf. This makes it
possible to use upstream units, while allowing them to be customised
from the NixOS configuration. For instance, the module nix-daemon.nix
now uses the units provided by the Nix package. And all unit
definitions that duplicated upstream systemd units are finally gone.
This makes the baseUnit option unnecessary, so I've removed it.
mkdir -m will only set the permissions if it *creates* the directory.
Existing directories, with possibly wrong permissions, will not be
updated.
Use explicit chmod so permissions will always be correct.
The preStart snippets (graphite, carbon) try to create directories under
/var/db/. That currently fails because the code is run as user
"graphite". Fix by setting "PermissionsStartOnly = true" so that the
preStart stuff is run as 'root'.
Further:
* graphite-web-0.9.12/bin/build-index.sh needs perl, so add it to PATH.
* Now that preStart runs as root, we must wait with "chown graphite"
until we're done creating files/directories.
* Drop needless check for root (uid 0) before running chown.
This mostly upgrades transmission, and does some very minor touchups on
AppArmor support.
In particular, there is now no need to ever specify the umask as part of
the settings, as it will be mixed in by default (which is essentially
always what you want). Also, the default configuration is now more
sensible: Downloads are put in /var/lib/transmission/Downloads, and
incomplete files are put in /var/lib/transmission/.incomplete - this
also allows easy use of file syncing probrams, like BitTorrent Sync.
Finally, this unconditionally enables the AppArmor profiles for the
daemon, if AppArmor is enabled - rather than letting the user specify
profile support, it's best to default to supporting profiles for daemons
transparently in all places.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
Enabling by default on gnome3 as now it's possible to create and use
accounts (tested with telepathy_gabble and gtalk).
At this time, empathy x86-64 fails to build on hydra but I'm unable
to reproduce. Therefore, try disabling the parallel build.
This prevents errors like "Another app is currently holding the
xtables lock" if the firewall and NAT services are starting in
parallel. (Longer term, we should probably move to a single service
for managing the iptables rules.)
This allows to easily override the used PHP package, especially for
example if you want to use PHP 5.5 or if you want to override the
derivation.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The postgresql module has a postStart section that waits for a database
to accept connections before continuing. However, this assumes various
properties about the database - specifically the database user
and (implicitly) the database name. This means that for old
installations, this command fails because there is no 'postgres' user,
and the service never starts.
While 7deff39 does create the 'postgres' user, a better solution is to
use `pg_isready`, who's sole purpose is to check if the database is
accepting connections. This has no dependency on users, so should be
more robust.
Old PostgreSQL installations were created using the 'root' database
user. In this case, we need to create a new 'postgres' account, as we
now assume that this is the superuser account.
Unfortunately, these machines will be left with a 'root' user as
well (which will have ownership of some databases). While PostgreSQL
does let you rename superuser accounts, you can only do that when you
are connected as a *different* database user. Thus we'd have to create a
special superuser account to do the renaming. As we default to using
ident authentication, we would have to create a system level user to do
this. This all feels rather complex, so I'm currently opting to keep the
'root' user on these old machines.
as per postgresql manual, interactions with psql should be carried
out with the postgresql system user and postgresql db user by default.
ensure it happens in postStart.
This reverts commit f7d5e83abb. It
breaks the Firefox and Xfce tests:
in job ‘tests.firefox.x86_64-linux’:
cannot coerce a boolean to a string
in job ‘tests.xfce.x86_64-linux’:
infinite recursion encountered
Latest update to udisks in 344f2e65 broke it for me. Fix it by doing the
following:
- Add udisks.service to /etc/systemd/system (via systemd.packages)
- Fix path to udisks-daemon in udisks.service (libexec/ instead of lib/)
- Make dhcp work, use dhcpcd without udev in container
- Make login shell work, patch getty to not wait for /dev/tty0
- Make ssh work, sshd/pam do not start session
According to the MySQL manual, this is a perfectly legal way of
shutting down the server. The shutdown logs also looks fine:
systemd[1]: Stopping MySQL Server...
mysqld[5114]: 140319 8:36:12 [Note] /nix/store/sc26mz82k97mbpx3d1abzn3rrbd155ws-mariadb-10.0.8/bin/mysqld: Normal shutdown
mysqld[5114]: 140319 8:36:12 [Note] Event Scheduler: Purging the queue. 0 events
mysqld[5114]: 140319 8:36:12 [Note] InnoDB: FTS optimize thread exiting.
mysqld[5114]: 140319 8:36:12 [Note] InnoDB: Starting shutdown...
mysqld[5114]: 140319 8:36:14 [Note] InnoDB: Shutdown completed; log sequence number 1619078
mysqld[5114]: 140319 8:36:14 [Note] /nix/store/sc26mz82k97mbpx3d1abzn3rrbd155ws-mariadb-10.0.8/bin/mysqld: Shutdown complete
systemd[1]: Stopped MySQL Server.
For example, the following sets up a container named ‘foo’. The
container will have a single network interface eth0, with IP address
10.231.136.2. The host will have an interface c-foo with IP address
10.231.136.1.
systemd.containers.foo =
{ privateNetwork = true;
hostAddress = "10.231.136.1";
localAddress = "10.231.136.2";
config =
{ services.openssh.enable = true; };
};
With ‘privateNetwork = true’, the container has the CAP_NET_ADMIN
capability, allowing it to do arbitrary network configuration, such as
setting up firewall rules. This is secure because it cannot touch the
interfaces of the host.
The helper program ‘run-in-netns’ is needed at the moment because ‘ip
netns exec’ doesn't quite do the right thing (it remounts /sys without
bind-mounting the original /sys/fs/cgroups).
This has the unintended side-effect of restarting httpd every time we
run switch-to-configuration, even if httpd hasn't changed (because
we're doing a "stop keys.target" now). So use a "Wants" dependency
instead.
This reverts commit b792394119.
Starting the manual on tty8 was intended as a convenience during
installation, not as a general purpose thing. In fact, given that w3m
runs as root, this is highly insecure!
This has the nice side-effect of making gpsd actually run!
Old behaviour (debugLevel=2):
systemd[1]: gpsd.service holdoff time over, scheduling restart.
systemd[1]: Stopping GPSD daemon...
systemd[1]: Starting GPSD daemon...
systemd[1]: gpsd.service start request repeated too quickly, refusing to start.
systemd[1]: Failed to start GPSD daemon.
systemd[1]: Unit gpsd.service entered failed state.
New behaviour (debugLevel=2):
gpsd[945]: gpsd: launching (Version 2.95)
systemd[1]: Started GPSD daemon.
gpsd[945]: gpsd: listening on port 2947
gpsd[945]: gpsd: running with effective group ID 27
gpsd[945]: gpsd: running with effective user ID 23
gpsd[945]: gpsd: stashing device /dev/ttyUSB0 at slot 0
Uses standard NixOS user config merging.
Work in progress: The slave config does not actually start the slave agent. This just configures a
jenkins user if required. Bare minimum to enable a nice jenkins SSH slave.
By default the jenkins server is executed under the user "jenkins". Which can be configured using
users.jenkins.* options. If a different user is requested by changing services.jenkins.user then
none of the users.jenkins options apply.
This patch does not include jenkins slave configuration. Some config options will probably change
when this is implemented.
Aspects like the user and environment are typically identical between slave and master. The service
configs are different. The design is for users.jenkins to cover the shared aspects while
services.jenkins and services.jenkins-slave cover the master and slave specific aspects,
respectively.
Another option would be to place everything under services.jenkins and have a config that selects
master vs slave.
