Commit Graph

453 Commits

Author SHA1 Message Date
John Ericson
ba52ae5048 treewide: isArm -> isAarch32
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.

The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:

```
ISA:             ARMv8   {-A, -R, -M}
                 /    \
Mode:     Aarch32     Aarch64
             |         /   \
Encoding:   A64      A32   T32
```

At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.

The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.

[1]: https://developer.arm.com/products/architecture/a-profile
2018-04-25 15:28:55 -04:00
Wout Mertens
8e3a14549f
zramSwap: remove mentions of old kernels 2018-04-19 16:53:40 +02:00
Wout Mertens
dd5e2a08fb
zramSwap: default to 1 device
One device per cpu is only needed for kernel 3.14
2018-04-19 16:44:08 +02:00
Jörg Thalheim
02dfbab3be nixos/pulseaudio: pulseaudio.enable should imply sound.enable
cc @fpletz
2018-04-14 19:12:47 +01:00
aszlig
99ba1cb424
Increase max group name length to 32 characters
With #36556, a check was introduced to make sure the user and group
names do not exceed their respective maximum length. This is in part
because systemd also enforces that length, but only at runtime.

So in general it's a good idea to catch as much as we can during
evaluation time, however the maximum length of the group name was set to
16 characters according groupadd(8).

The maximum length of the group names however is a compile-time option
and even systemd allows more than 16 characters. In the mentioned pull
request (#36556) there was already a report that this has broken
evaluation for people out there.

I have also checked what other distributions are doing and they set the
length to either 31 characters or 32 characters, the latter being more
common.

Unfortunately there is a difference between the maximum length enforced
by the shadow package and systemd, both for user name lengths and group
name lengths. However, systemd enforces both length to have a maximum of
31 characters and I'm not sure if this is intended or just a off-by-one
error in systemd.

Nevertheless, I choose 32 characters simply to bring it in par with the
maximum user name length.

For the NixOS assertion however, I use a maximum length of 31 to make
sure that nobody accidentally creates services that contain group names
that systemd considers invalid because of a length of 32 characters.

Signed-off-by: aszlig <aszlig@nix.build>
Closes: #38548
Cc: @vcunat, @fpletz, @qknight
2018-04-08 12:51:33 +02:00
Michael Raskin
b07ce1fb74
Merge pull request #38114 from oxij/nixos/doc-module
nixos: doc module
2018-04-05 07:09:32 +00:00
Michael Raskin
195521350a
Merge pull request #38111 from oxij/tree/cleanups
assorted cleanups
2018-04-05 07:08:05 +00:00
Joachim Schiele
1b0cb040d9 user/group assertion to not exceed the 32 character limit 2018-03-30 23:43:23 +02:00
Jan Malakhovski
98fd9b7f86 nixos: doc: introduce documentation config subtree 2018-03-30 06:52:26 +00:00
Jan Malakhovski
302c170e1c nixos: replace optionals -> optional in nsswitch 2018-03-30 06:44:18 +00:00
Jan Malakhovski
6d7854a9a8 nixos: users-groups: cleanup 2018-03-30 06:40:13 +00:00
Florian Klink
6ac74d60ad networkmanager-pptp: remove package
Currently broken on NixOS due to hardcoded modprobe binary path (see
bug #30756 from Oct 2017), no activity on a proposed fix for months.
As the protocol is terribly broken anyways, let's better remove it
completely, and not talk about anymore ;-)

Closes #30756.
2018-03-23 22:24:50 +01:00
Jan Malakhovski
7079e744d4 Merge branch 'master' into staging
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):

   pkgs/development/libraries/epoxy/default.nix
   pkgs/development/libraries/gtk+/3.x.nix
   pkgs/development/python-modules/asgiref/default.nix
   pkgs/development/python-modules/daphne/default.nix
   pkgs/os-specific/linux/systemd/default.nix
2018-03-10 20:38:13 +00:00
Vladimír Čunát
b70c93f211
Merge branch 'master' into nix-2.0 2018-03-03 18:02:35 +01:00
Shea Levy
fec543436d
nixos: Move uses of stdenv.shell to runtimeShell. 2018-03-01 14:38:53 -05:00
Shea Levy
c54730dde8
gobjectIntrospection: Enable building without X11 support.
Also disable it when noXlibs in NixOS.
2018-03-01 07:36:36 -05:00
Shea Levy
aebb024b2f
nixos: Take glibcLocales from buildPackages.
No need to cross-compile pure data...
2018-02-28 15:01:32 -05:00
Eelco Dolstra
9fc786c3a4
Create /home with the right permissions
Without this, it will be created with 700 permissions.
2018-02-27 20:28:49 +01:00
Jan Tojnar
a31d98f312
tree-wide: autorename gnome packages to use dashes 2018-02-25 17:41:16 +01:00
Eelco Dolstra
cc0caac098
Move creation of /root to the activation script
...so it appears in a new installation before rebooting the system.
2018-02-05 22:12:18 +01:00
Franz Pletz
36103e9863
nixos/powerManagement: remove duplicate definition
When not set just use the kernel default. `nixos-generate-config` will pick
a reasonable default.

cc #34350
2018-01-28 21:53:07 +01:00
Maximilian Bosch
8ed3a90cdf
nixos/powerManagement: set cpuFreqGovernor with mkOptionDefault
`nixos-generate-config` detects the `cpuFreqGovernor` suited best for my
machine, e.g. `powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";`.

However the `powerManagement` module sets a sensitive default for
`cpuFreqGovernor` using `mkDefault` to avoid breackage with older
setups. Since 140ac2f1 the `hardware-configuration.nix` sets the
gorvernor with `mkDefault` as well which causes evaluation errors if the
powermanagement module is enabled:

```
error: The unique option `powerManagement.cpuFreqGovernor' is defined multiple times, in `/home/ma27/Projects/nixos-config/hardware-configuration.nix' and `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/config/power-management.nix'.
```

Using `mkOptionDefault` rather than `mkDefault` in the powermanagement
module fixes this issue as it decreases the priority of the module and
prefers the value set in `hardware-configuration.nix`.

I have confirmed the change using the following VM declaration:

```
{
  cpuFreq = { lib, ... }: {
    powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
    powerManagement.enable = true;
  };
}
```
2018-01-28 09:38:45 +01:00
Matthieu Coudron
91648a2f22 environment.variables: give an example 2018-01-22 10:40:23 +09:00
Jan Tojnar
bd0d521774
pinentry: override pinentry_ncurses instead of the other way around 2017-12-16 04:39:29 +01:00
Jan Tojnar
ba67110de3
pinentry_qt: merge into pinentry 2017-12-16 03:26:30 +01:00
Orivej Desh
d5facd5df3 nixos/networking: support static resolv.conf 2017-12-04 13:58:54 +00:00
Orivej Desh
905672f524 nixos/pulseaudio: document audio group for system wide access 2017-11-30 06:37:01 +00:00
Peter Hoeg
80c5cf80f2
pulseaudio/nixos: set it as default for openal/libao if enabled (#32078)
- /var/run -> /run as the former is deprecated
- configure openal to use pulseaudio if pulseaudio is enabled
- configure libao to use pulseaudio if pulseaudio is enabled
2017-11-27 15:49:38 +08:00
Jörg Thalheim
3ea493430a
Merge pull request #31283 from michalrus/per-user-profiles-buildEnv
users-groups module: use `buildEnv` in per-user profiles
2017-11-25 15:28:58 +00:00
Benjamin Staffin
64a9f5f0eb
fonts: fix fontconfig.localConf when used with penultimate
Fixes #31500
2017-11-10 16:57:45 -05:00
Michal Rus
55344df089
users-groups module: use buildEnv in per-user profiles
Resolves #31253
2017-11-05 17:56:31 +01:00
Graham Christensen
ab8b14cf92 Merge pull request #30397 from grahamc/nix-help
nix-info: init
2017-10-16 21:37:00 -04:00
Jason A. Donenfeld
f6d8a96993 nsswitch: use [NOTFOUND=return] for mdns
Commit 987aac7 and issue #18183 were intended to fix support for other
things, but in the process, changed mdns_minimal to use the wrong return
setting, resulting in permanent failures in early boot, affecting things
like issue #30459.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2017-10-16 15:11:58 +02:00
Graham Christensen
b16f3b2131
nix-info: include in nixos' default system-path, nixpkgs's channel 2017-10-14 22:01:30 -04:00
Graham Christensen
55bc53d1dd Merge pull request #30258 from srhb/tz-nospace
nixos/config/timezone: Disallow spaces
2017-10-14 10:27:09 -04:00
Peter Hoeg
6fd4209594 Revert "networking: add option to toggle the wait-online service"
This reverts commit 8758f476b3.
2017-10-14 14:42:49 +08:00
Peter Hoeg
8758f476b3 networking: add option to toggle the wait-online service 2017-10-14 14:38:04 +08:00
Eelco Dolstra
ee9a15b323
Set $NIX_DEBUG_INFO_DIRS when environment.enableDebugInfo is enabled
This allows it to co-exist with other debug info directories, such as
the one used by dwarffs
(https://github.com/edolstra/dwarffs/blob/master/module.nix).
2017-10-10 12:04:57 +02:00
Sarah Brofeldt
7b81889394 nixos/config/timezone: Disallow spaces 2017-10-09 20:52:25 +02:00
Franz Pletz
eb59961855
Revert "pinentry: make GTK3 the default front-end"
This reverts commit 3f7e3db744.

This broke the gpg-agent user service. See #27468.
2017-10-04 02:16:37 +02:00
Jörg Thalheim
0b18fa4f09 Merge pull request #30014 from eqyiel/krb5-fixes
nixos/krb5: complete rewrite
2017-10-03 11:04:58 +01:00
Joerg Thalheim
1406e249b3 krb5: add deprecation date for old configuration 2017-10-03 11:01:05 +01:00
Ruben Maher
06e15e59f9 nixos/krb5: complete rewrite
The `krb5` service was a bit lacking.

Addresses NixOS/nixpkgs#11268, partially addresses NixOS/nixpkgs#29623.
2017-10-02 14:30:19 +10:30
Jan Tojnar
3f7e3db744
pinentry: make GTK3 the default front-end
See: https://github.com/NixOS/nixpkgs/issues/18559
2017-10-01 01:40:03 +02:00
Peter Simons
99f759de1c Revert "nixos: add option for bind to not resolve local queries (#29503)"
This reverts commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.

(cherry picked from commit 23a021d12e8f939cd0bfddb1c7adeb125028c1e3)
2017-09-23 16:41:34 +02:00
gwitmond
bd52618c9d
nixos: add option for bind to not resolve local queries (#29503)
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.

The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.

This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.

Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.

(cherry picked from commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6)

This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
2017-09-18 22:54:29 +02:00
pbogdan
94a4183bda nixos/fontconfig: fix substitutions option (#28895) 2017-09-05 16:20:42 +00:00
Orivej Desh
7803d69b78 nixos: update glibc locales link 2017-09-03 18:00:35 +00:00
Symphorien Gibol
bd54589233 networkmanager_iodine: init at 1.2.0 2017-08-30 02:58:29 +02:00
gnidorah
0e28d3af1d nixos: add pathes for KDE applications 2017-08-06 12:55:10 +03:00