* Fix the FW names
FW_REFUSE was removed and nixos-fw-input was renamed to nixos-fw.
* Update the comment (documentation) at the top
Order the chains of the main table alphabetically (like in the rest of
the file) and add nixos-fw-rpfilter (from the raw table) and nixos-drop
(used while reloading the firewall).
* Refactor the module (mainly comments)
- Move some attributes to the top for better visibility (that should
hopefully make it easier to read and understand this module without
jumping around too much).
- Add some missing examples and improve some descriptions.
- Reorder the mkOption attributes for consistency.
- Wrap lines at 72 characters.
- Use two spaces between sentences.
Using outputsToInstall the intended behaviour of including host and dnsutils
when bind is installed can be implemented instead of using symlinks to fix
installing all outputs individually with nix-env.
Fixes#19761.
* fix/asterisk-module: use unix-group for asterisk-files
* fix/asterisk-module: add configOption to use some default config-files
* fix/asterisk-module: correction of skel copy
* fix/asterisk-module: use /etc/asterisk as configDir
* fix/asterisk-module: add reload; do not restart unit
* asterisk: 13.6.0 -> 14.1.2
* fix/asterisk: compile with lua, pjsip, format_mp3
* fix/asterisk: fix indentation
* fix/asterisk: remove broken flag
- most nixos user only require time synchronisation,
while ntpd implements a battery-included ntp server (1,215 LOCs of C-Code vs 64,302)
- timesyncd support ntp server per interface (if configured through dhcp for instance)
- timesyncd is already included in the systemd package, switching to it would
save a little disk space (1,5M)
It was deprecated and removed from all modules in the tree by #18319.
The wireguard module PR (#17933) was still in the review at the time and
the deprecated usage managed to slip inside.
The configuration { services.openssh.enable = true;
services.openssh.forwardX11 = false; } caused
programs.ssh.setXAuthLocation to be set to false, which was not the
intent. The intent is that programs.ssh.setXAuthLocation should be
automatically enabled if needed or if xauth is already available.
The old etcd port 4001 is no longer enabled by default in etcd 3.
The new port is 2379 and is officially assigned by IANA.
There were still some services left that expect etcd on port 4001 by default.
This changes the default to 2379 everywhere.
It should not cause problems for users as the etcd by nix does listen on the new port only by default anyway.
The current default probe config uses the unwrapped fping binary, which
leads to an error because fping must be executed with elevated
permissions.
I fixed this by changing the path to the default binary to the
setuid-wrapped version.
This commit includes two changes:
1. A new `extraConfig` option to allow administrators to set any
vsftpd configuration option that isn't directly supported by this
derivation.
2. Correctly set the `anon_root` vsftpd option to `anonymousUserHome`
In the prestart config of the smokeping service, smokeping is executed
initially. This happens as the user root and writes some files to
$smokepingHome, which can't be overwritten by the smokeping user. This
gives an error message.
I fixed this by moving the chown step after the initial smokeping runs,
so that it also affects the generated files.
The old version would export two lists to a bash builder and do pairwise
processing on the bash side. In the new version we instead generate a
logic free builder on the Nix side. This is not only conceptually
simpler but reduces the amount of code and intermediate values.
`head -cNUM ... | tr -dc SET` might generate output containing fewer
than NUM characters. Given the limited alphabet, this could result in a
fairly weak passphrase. The construction `tr </dev/urandom | head
-cNUM`, however, is sure to give us the full `NUM`.
Currently only for the user services as NixOS handles the named system
instances slightly differently.
syncthing and syncthing-inotify are done the same way.
There are 4 parts to this:
1) Copy in the upstream unit files
2) Make the nixos module use the definition from upstream
3) Enable restarting of all instances (system and user) on resume
4) Allow the traffic in the firewall on default ports if wanted
fixes#18973
* Add extraOptions option, to pass arbitrary command line options to
atftp. Especially useful to specify which address to bind to
(--bind-addres ...).
* Improve descriptions (fix a typo, document default bind address,
don't repeat service name in systemd description + capitalize)
* Change default server directory from /var/empty to /srv/tftp, and
change types.str to types.path.
The new units mirror the upstream systemd units as closely as possible.
I could not find a reason why the service would need to be restarted on
resuming from suspend, and the upstream units also do not contain such a
restriction, so I removed the `partOf = [ "post-resume.target"]`.
This fixes#19525.
`stripHash` documentation states that it prints out the stripped name to
the stdout, but the function stored the value in `strippedName`
instead.
Basically all usages did something like
`$(stripHash $foo | echo $strippedName)` which is just braindamaged.
Fixed the implementation and all invocations.
The initial commit accidentally left in some commented code and if you were
using alerts, they simply didn't work.
Smokeping also includes some JS code for the webui allowing you to zoom into
graphs and it was not passed into the homedir. Additionally, generate
static html pages for other webservers to serve the cache directory.
Add additional options to specify sendmail path or mailhost and verify that both
are not set.
Add one extra config hook that allows you to bypass all of the invidual config
stanzas and just hand it a string.
4.1.12
======
Bugfixes
--------
Fix malformed edns query assertion failure, reported by Michal Kepien (NASK).
4.1.11
======
Features
--------
* When tcp is more than half full, use short timeout for tcp session.
* Patch for {max,min}-{refresh,retry}-time from YAMAGUCHI Takanori.
* Fix#790: size-limit-xfr can stop NSD from downloading infinite zone transfer data size, from Toshifumi Sakaguchi. Fixes CVE-2016-6173 JVN#63359718 JPCERT#91251865.
Bugfixes
--------
* Fix build without IPv6, patch from Zdenek Kaspar.
* Fix#783: Trying to run a root server without having configured it silently gives wrong answers.
* Fix#782: Serve DS record but parent zone has no NS record.
* Fix nsec3 missing for nsec3 signed parent and child for DS at zonecut.
4.1.10
======
Features
--------
* ip-freebind: yesno option in nsd.conf sets IP_FREEBIND socket option for Linux, binds to interfaces and addresses that are down.
* NSD includes AAAA before A for queries over IPV6 (in delegations). And TC is set if no glue can be provided with a delegation because of packet size.
* print notice that nsd is starting before taking off.
Bugfixes
--------
* Fix for openssl 1.1.0, HMAC_CTX size not exported from openssl.
* Fix#751: NSD fails to occlude names below a DNAME.
* If set without nsd.db print "" as the default in the man pages.
* Fix#755: NSD spins after a zone update and a lot of TCP queries.
* Fix for NSEC3 with zone signed without exact match for empty nonterminals, the answer for that domain gets closest encloser.
* #772 Document that recvmmsg has IPv6 problems on some linux kernels.
4.1.9
=====
Bugfixes
--------
* Change the nsd.db file version because of nanosecond precision fix.
The services/networking directory is already quite polluted and the
first point where I was looking for the offlineimap module was in
services/mail and didn't find it there.
Offlineimap already has IMAP in its name and clearly belongs to the
"mail" category so let's move it there.
Tested by evaluating a configuration with services.offlineimap enabled.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @DamienCassou
Coercing the derivation to string causes the package to be built during
evaluation rather than during actual realization which is completely
unnecessary because we don't need additional Nix expression information
for the package (nor do we need it for the service).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @DamienCassou
Cc: @Profpatsch (stumbled on this because of him)
While entering the chroot should provide the same amount of isolation,
the preStart script will run with full root privileges and so would
benefit from some isolation as well (in particular due to
unbound-anchor, which can perform network I/O).
1. The preStart script ensures consistent ownership, even if the unbound
user's uid has changed
2. The unbound daemon does not generate data that needs to be private to
it, so it would not matter that a different service would end up
owning its data (as long as unbound remains enabled, it should reclaim
ownership soon enough anyway).
Thus, there's no clear benefit to allocate a dedicated uid for the
unbound service. This releases uid/gid 48.
Also, because the preStart script creates the data directory, there's no
need to specify a homedir or ask for its creation.
/dev/random is an exhaustible resource. Presumably, unbound will not be
used to generate long-term encryption keys and so allowing it to use
/dev/random only increases the risk of entropy exhaustion for no
benefit.
See #18319 for details. Starting network-online.target manually does not
work as it hangs indefinitely.
Additionally, don't treat avahi and dhcpcd special and sync their systemd units
with the respective upstream suggestion.
Systemd upstream provides targets for networking. This also includes a target network-online.target.
In this PR I remove / replace most occurrences since some of them were even wrong and could delay startup.
Radicale can run as a foreground service and will then emits logging and
errors on the standard output. This helps the logging end up in the
systemd journal.
Follow-up to the following commits:
abdc5961c3: Fix starting the firewall
e090701e2d: Order before sysinit
Solely use sysinit.target here instead of multi-user.target because we
want to make sure that the iptables rules are applied *before* any
socket units are started.
The reason I've dropped the wantedBy on multi-user.target is that
sysinit.target is already a part of the dependency chain of
multi-user.target.
To make sure that this holds true, I've added a small test case to
ensure that during switch of the configuration the firewall.service is
considered as well.
Tested using the firewall NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Probably as a result of 992c514a20, it
was not being started anymore.
My understanding of systemd.special(7) (section "Special passive
system units") is that the firewall should want network-pre.target,
rather than the other way around (not very intuitive...). This in
itself does not cause the firewall to be wanted, which is why the
wanted-by relationship with multi-user.target is necessary.
http://hydra.nixos.org/build/39965589
Adds a new chain in the raw table for reverse path filtering and optional
logging. A rule to allow serving DHCPv4 was also added as it is commonly
needed and poses no security risk even when no DHCPv4 server is running.
Fixes#10101.
The shairport-sync service currently fails to start with the error
shairport avahi_entry_group_new failed
This problem seems to have been introduced by
cdd7310a50
After some trial and error I concluded that the attached commit is a minimal
fix.
stripHash uses a global variable to communicate it's computation
results, but it's not necessary. You can just pipe to stdout in a
subshell. A function mostly behaves like just another command.
baseHash() also introduces a suffix-stripping capability since it's
something the users of the function tend to use.
wpa_supplicant fails to start if the wireless interfaces aren't ready yet,
so we need to add a system ordering directive here to start wpa_supplicant
after the interfaces are ready. Note that Requires= is not enough since
it does not imply ordering.
The update-resolve-conf script from the update-resolv-conf
package is very useful and should work in most of the common
cases, so this adds an option to enable it. The option is
disabled by default for backwards compatibility.
This reverts commit c25907d072.
I think this commit broke the NixOS service for NetworkManager. At least
with this, and the two previous reverts, everything is back to normal.
(With multiple-outputs split, it would have reduced the closure size by
3 MiB.)
This reverts commit 7ac1ef05fa.
One of a few reverts needed to unbreak networkmanager NixOS service
since the multiple-output split (to save 3 MiB of closure size).
This reverts commit 2875293615.
One of a few reverts needed to unbreak networkmanager NixOS service
since the multiple-output split (to save 3 MiB of closure size).
leveraging users.users.<user>.createHome instead of a preStart script.
preStart script is still required to ensure proper creation of logging
directory.
The list of public proxies is updated now and again and it's probably a
good idea to always work from the most recent list, rather than the one
that is shipped with the release. This can be crucial in case of
resolvers that are revealed to have gone rogue or otherwise have been
compromised.
- services.iodined moved to services.iodine
- configuration file backwards compatable
- old iodine server configuration moved to services.iodine.server
- attribute set services.iodine.clients added to specify any number
of iodine clients
- example:
iodine.clients.home = { server = "iodinesubdomain.yourserver.com"; ... };
- client services names iodine-name where name would be home
Previously, the cisco resolver was used on the theory that it would
provide the best user experience regardless of location. The downsides
of cisco are 1) logging; 2) missing supoprt for DNS security extensions.
The new upstream resolver is located in Holland, supports DNS security,
and *claims* to not log activity. For users outside of Europe, this will
mean reduced performance, but I believe it's a worthy tradeoff.
When iodined tries to start before any interface other than loopback has an ip, iodined fails.
Wait for ip-up.target
The above is because of the following:
in iodined's code: src/common.c line 157
the flag AI_ADDRCONFIG is passed as a flag to getaddrinfo.
Iodine uses the function
get_addr(char *host,
int port,
int addr_family,
int flags,
struct sockaddr_storage *out);
to get address information via getaddrinfo().
Within get_addr, the flag AI_ADDRCONFIG is forced.
What this flag does, is cause getaddrinfo to return
"Name or service not known" as an error explicitly if no ip
has been assigned to the computer.
see getaddrinfo(3)
Wait for an ip before starting iodined.
This patch fixes https://github.com/NixOS/nixpkgs/issues/12927.
It would be great to configure good rate-limiting defaults for this via
/proc/sys/net/ipv4/icmp_ratelimit and /proc/sys/net/ipv6/icmp/ratelimit,
too, but I didn't since I don't know what a "good default" would be.
Some users may wish to improve their privacy by using per-query
key pairs, which makes it more difficult for upstream resolvers to
track users across IP addresses.
- fix `enable` option description
using `mkEnableOption longDescription` is incorrect; override
`description` instead
- additional details for proper usage of the service, including
an example of the recommended configuration
- clarify `localAddress` option description
- clarify `localPort` option description
- clarify `customResolver` option description
Broken by 17389e256f.
The description attributes of mkOption are parsed by XSLT, so we can
create a DocBook manual out of it.
Unfortunately, the passwordHash option had a description which includes
a <password> placeholder which is recognized by DocBook XSL as a valid
start tag. So as there is obviously no </password>, the build of the
manual bailed out with a parsing error.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: devhell <"^"@regexmail.net>
NetworkManager needs an additional avahi-user to use link-local
IPv4 (and probably IPv6) addresses. avahi-autoipd also needs to be
patched to the right path.
We don't want to build all those things along with the manual, so that's
what the defaultText attribute is for.
Unfortunately a few of them were missing, so let's add them.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts most of 89e983786a, as those references are sanitized now.
Fixes#10039, at least most of it.
The `sane` case wasn't fixed, as it calls a *function* in pkgs to get
the default value.
