Note that currently this depends on the default nixpkgs mesa and pango.
It may be possible to build more limited versions that don't e.g. depend
on the full X stack without limiting kmscon (which of course doesn't use
X).
Depends on libtsm, added in the same commit.
Signed-off-by: Shea Levy <shea@shealevy.com>
This is a second attempt at unifying the generic and manual-config
kernel builds (see #412 for the last time).
The set of working kernel packages is a superset of those that work on
master, and as the only objection last time was the size of the $dev
closure and now both $out and $dev combined are 20M smaller than $out on
master (see message for ac2035287f), this
should be unobjectionable.
Signed-off-by: Shea Levy <shea@shealevy.com>
Based on access analysis with strace, I determined an essentially
minimal required set of files from the kernel source that was needed to
build all current kernel packages on 3.10, which ultimately resulted in
keeping 30M of source. Generalizing from that minimal set, which
required ad-hoc specifications of which headers outside of include/ and
arch/*/include and which files in the scripts/ directory should be kept,
to a policy of keeping all non-arch-specific headers that aren't part of
the drivers/ directory and the entire scripts/ directory added an
additional 17M, but there was nothing in the analysis that indicated
that that ad-hoc specification was at all complete so I think the extra
hit is worth the likely greater compatibility.
For reference, we now keep:
* All headers that are NOT in arch/${notTargetArch}/include or drivers/
* The scripts/ directory
* Makefile
* arch/${targetArch}/Makefile
IMO the most likely cause of future problems are the headers in
drivers/, but hopefully they won't actually be needed as they add 50M
Ideally kernel packages would only use include and
arch/${targetArch}/include, but alas this is observably not the case.
master:
* $out
* size: 234M
* references-closure: linux-headers, glibc, attr, acl, zlib, gcc,
coreutils, perl, bash
merge-kernel-builds:
* $out
* size: 152M
* references-closure: none
* $dev
* size: 57M
* references-closure: linux-headers, glibc, zlib, gcc
So even with the non-minimal set we still beat out master. Keeping the
drivers headers would make us only slightly bigger.
Signed-off-by: Shea Levy <shea@shealevy.com>
In most cases, this just meant changing kernelDev (now removed from
linuxPackagesFor) to kernel.dev. Some packages needed more work (though
whether that was because of my changes or because they were already
broken, I'm not sure). Specifics:
* psmouse-alps builds on 3.4 but not 3.10, as noted in the comments that
were already there
* blcr builds on 3.4 but not 3.10, as noted in comments that were
already there
* open-iscsi, ati-drivers, wis-go7007, and openafsClient don't build on
3.4 or 3.10 on this branch or on master, so they're marked broken
* A version-specific kernelHeaders package was added
The following packages were removed:
* atheros/madwifi is superceded by official ath*k modules
* aufs is no longer used by any of our kernels
* broadcom-sta v6 (which was already packaged) replaces broadcom-sta
* exmap has not been updated since 2011 and doesn't build
* iscis-target has not been updated since 2010 and doesn't build
* iwlwifi is part of mainline now and doesn't build
* nivida-x11-legacy-96 hasn't been updated since 2008 and doesn't build
Everything not specifically mentioned above builds successfully on 3.10.
I haven't yet tested on 3.4, but will before opening a pull request.
Signed-off-by: Shea Levy <shea@shealevy.com>
This makes the disk usage footprint of building the kernel smaller in 3
ways:
1) There is no separate kernel source derivation
2) Rather than using the entire build tree, only the output of make
modules_prepare is kept in the $dev output (plus the module symbol
versioning file generated during the build)
3) Only the subset of the source tree known to be needed for external
builds is kept in $dev
Note that while 2) is supported by official kernel documentation, I
couldn't find any source describing what we need to keep for 3). I've
started with the bare minimum (the main Makefile is called by the
Makefile generated by make modules_prepare) and we can/should add more
as needed for kernelPackages.
Signed-off-by: Shea Levy <shea@shealevy.com>
This has three major benefits:
1. We no longer have two kernel build processes to maintain
2. The build process is (IMO) cleaner and cleaves more closely to
upstream. In partuclar, we use make install to install the kernel and
development source/build trees, eliminating the guesswork about which
files to copy.
3. The derivation has multiple outputs: the kernel and modules are in
the default `out' output, while the build and source trees are in a
`dev' output. This makes it possible for the full source and build tree
to be kept (which is expected by out-of-tree modules) without bloating
the closure of the system derivation.
In addition, if a solution for how to handle queries in the presence of
imports from derivations ever makes it into nix, a framework for
querying the full configuration of the kernel in nix expressions is
already in place.
Signed-off-by: Shea Levy <shea@shealevy.com>
In the most general case, the cross and native kernel may differ in
patches and configuration file as well as architecture, kernel target,
etc. It's probably overkill to support that case, but since it was
doable without much duplication and it will make integrating with the
existing cross-compilation support in the generic kernel I decided to
implement it anyway.
Signed-off-by: Shea Levy <shea@shealevy.com>
nix's version parsing treats the previous name as a package named
`linux' with version `${version}-source', when we really want a package
named `linux-source' with version `${version}'
Signed-off-by: Shea Levy <shea@shealevy.com>
This only affects the `oldaskconfig' make target, so it shouldn't really
affect current manual-config users, but it does make it more
straightforward to implement the generic kernel build on top of
manual-config.
Signed-off-by: Shea Levy <shea@shealevy.com>
If the config attrset is manually specified, we still want isYes,
isModule, etc. to work. But we let the passed in config attrset take
precedence, if for some reason the caller wants to provide their own
implementation of one or more of these functions.
Signed-off-by: Shea Levy <shea@shealevy.com>
With this, I was able to successfully compile a defconfig kernel for the
sheevaplug, though I didn't actually try to run it (not having a
sheevaplug myself).
For native compiles, the most significant difference is that the
platform's kernel target is built directly rather than hoping the
default make target will pull it in.
Also some stylistic improvements along the way.
Signed-off-by: Shea Levy <shea@shealevy.com>
* upstream: patches have been moved into the patches-5.0.x directory
* disable autofs preparing and then moving mount points
"With the introduction of systemd the root filesystem is now usually
marked as shared instead of private as part of the systemd sandbox
functionality. As a consequence moving a mount from one mount point to
another is not allowed."
Copy only the pc files related to X11 and OpenGL.
This should allow us to build our own version of libraries like
cairo without having the native ones be accidentally dynamically
linked in to things that depend on them.
Before this patch if we `dyldinfo -dylibs libpangocairo` we can
see that it was dynamically linked against the OS X (but seemingly
built against include files from the nix one, as we would get a
runtime complaint about missing symbols)
The function ‘mkDerivation’ now checks whether the current platform
type is included in a package's meta.platform field. If not, it
throws an exception:
$ nix-build -A linux --argstr system x86_64-darwin
error: user-thrown exception: the package ‘linux-3.10.15’ is not supported on ‘x86_64-darwin’
These packages also no longer show up in ‘nix-env -qa’ output. This
means, for instance, that the number of packages shown on
x86_64-freebsd has dropped from 9268 to 4764.
Since meta.platforms was also used to prevent Hydra from building some
packages, there now is a new attribute meta.hydraPlatforms listing the
platforms on which Hydra should build the package (which defaults to
meta.platforms).
* Remove package name
* Start with upper case letter
* Remove trailing period
Also reword some descriptions and move some long descriptions to
longDescription.
I'm not touching generated packages.
There are many more packages to fix, this is just a start.
Rules:
* Don't repeat the package name (not always that easy...)
* Start with capital letter
* Don't end with full stop
* Don't start with "The ..." or "A ..."
I've also added descriptions to some packages and rewritten others.
Although this is a release canidate version of kernel 3.12, there are
reasons for merging this anyway, as discussed in #1010 and #1006.
Thanks to @offlinehacker for this and the initial pull request.
Setfile is included by other derivation, which in turns makes them unfree, too.
This causes plenty of evaluation errors on Hydra, i.e.:
at `haskellPackages_ghc763_profiling.wx.x86_64-darwin' [nixpkgs = ..., officialRelease = false]:
user-thrown exception: package ‘setfile’ has an unfree license, refusing to evaluate
Now, it's true that "setfile" is unfree, but this doesn't affect us: our
derivation doesn't include the actual binary -- it just contains a symlink to
"/usr/bin/SetFile". Arguably, our setfile derivation is free and we can
re-distribute it.
it helps, but is incomplete.
more fixes are coming, but including these would change too much
generic btrfs code, which might cause trouble for others.
so the best advice is not to use btrfs send yet and wait for 3.11 or 3.12
Hydra has these evaluation errors:
at `nixpkgs.linuxPackages.lttngModules.i686-linux' [nixosSrc = ..., nixpkgs = ..., officialRelease = false]:
value is an attribute set while a string was expected
because licenses.mit is an attribute set and not a string.
TODO: Licenses in pkgs/lib/licenses.nix are a mix of attr sets and
strings, this needs to be standardized.
Add linux kernel modules needed to do kernel tracing with LTTng.
To make them available to lttng in NixOS, add this to configuration.nix:
boot.extraModulePackages = [ pkgs.linuxPackages.lttngModules ];
It has been submitted for inclusion in mainline, so it will probably
make it into 3.11 (or 3.12 as 3.11 is fairly close to release).
It is very local, only affecting people who use the "send" feature.
Without it, send is unstable/unsafe to use incrementally.
It can probably be applied to 3.9 and 3.8 as well, but as I only
tested it against 3.10, so I didn't bother.
It's bad to have the kernel config scattered across two places. (This
should also be done for the other architectures.)
Also, restore Xen and KVM guest support in Linux 3.10.
Having N different copies of the NixOS kernel configuration is bad
because these copies tend to diverge. For instance, our 3.10 config
lacked some modules that were enabled in older configs, probably
because the 3.10 config had been copied off an earlier version of some
older kernel config.
So now there is a single kernel config in common-config.nix. It has a
few conditionals to deal with new/removed kernel options, but
otherwise it's pretty straightforward.
Also, a lot of cut&paste boilerplate between the kernel Nix
expressions is gone (such as preConfigure).
KQEMU was a linux kernel module for accelerating the QEMU virtual
machine on x86 hardware. Since QEMU 0.11 (and up), there is no support
for KQEMU any more, the focus is now on KVM.
http://wiki.qemu.org/KQemu/Doc
9p (with caching enabled) is much faster than CIFS and doesn't require
Samba or virtual networking. For instance, building GNU Hello with
CIFS takes ~323s on my laptop, but with 9p it takes 54s.
More measurements will be needed to see if "cache=fscache" is really
faster than "cache=loose" (the former seems to be a little bit
faster).
Starting with 3.10, #! script handling can be built modularly (or not
at all). By default the nixpkgs builder sets everything modular, but
since our initird init is a #! script this creates a chicken-and-egg
problem on NixOS.
Signed-off-by: Shea Levy <shea@shealevy.com>
Kinda icky to not have archives available here, but I got an error during VM
tests because of an sha256sum mismatch, hence the update. Maybe Hydra has cached
this?
And yes, I checked twice, it wasn't a broken download - there really *is* a new
upstream version available.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
