Having socket-activated epmd means that there always be only a single
instance managed centrally. Because Erlang also starts it
automatically if not available, and in worst case scenario 'epmd' can
be started by some Erlang application running under systemd. And then
restarting this application unit will cause complete loss of names in
'epmd' (if other Erlang system are also installed on this host).
E.g. see at which lengths RabbitMQ goes to recover from such
situations:
7741b37b1e/src/rabbit_epmd_monitor.erl (L36)
Having the only one socket-activated epmd completely solves this
problem.
This allows non-privileged users to configure local DNS
entries by editing hosts files read by NetworkManager's dnsmasq
instance.
Cherry-picked from e6c3d5a507909c4e0c0a5013040684cce89c35ce and
5a566004a2b12c3d91bf0acdb704f1b40770c28f.
The deep merge caused all the options to be unset when generating docs, unless quagga was enabled.
Using imports, instead, properly allows the documentation to be generated.
Rather than special-casing the dns options in networkmanager.nix, use
the module system to let unbound and systemd-resolved contribute to
the newtorkmanager config.
Commit 401370287a introduced a small error
where the closing tag of <literal/> was an opening tag instead.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @basvandijk, @xeji
Peviously only the timesyncd systemd unit was disabled. This meant
that when you activate a system that has chronyd enabled the following
strange startup behaviour takes place:
systemd[1]: Starting chrony NTP daemon...
systemd[1]: Stopping Network Time Synchronization...
systemd[1]: Stopped chrony NTP daemon.
systemd[1]: Starting Network Time Synchronization...
[x] Support transparent proxying. This means services behind sslh (Apache, sshd and so on) will see the external IP and ports as if the external world connected directly to them.
[x] Run sslh daemon as unprivileged user instead of root (it is not only for security, transparent proxying requires it)
[x] Removed pidFile support (it is not compatible with running sslh daemon as unprivileged user)
[x] listenAddress default changed from "config.networking.hostName" (which resolves to meaningless "127.0.0.1" as with current /etc/hosts production) to "0.0.0.0" (all addresses)
BIND doesn't allow the options section (or any section I'd guess) to be
defined more than once, so whenever you want to set an additional option
you're stuck using weird hacks like this:
services.bind.forwarders = lib.mkForce [ "}; empty-zones-enable no; #" ];
This basically exploits the fact that values coming from the module
options aren't escaped and thus works in a similar vain to how SQL
injection works.
Another option would be to just set configFile to a file that includes
all the options, including zones. That obviously makes the configuration
way less extensible and more awkward to use with the module system.
To make sure this change does work correctly I added a small test just
for that. The test could use some improvements, but better to have a
test rather than none at all. For a future improvement the test could be
merged with the NSD test, because both use the same zone file format.
This change has been reviewed in #40053 and after not getting any
opposition, I'm hereby adding this to master.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @peti, @edolstra
Closes: #40053
Wireguard is now split into two pretty much independent packages:
`wireguard` (Linux-specific kernel module) and `wireguard-tools`,
which is cross-platform.
* networking/stubby.nix: implementing systemd service module for stubby
This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.
* networking/stubby.nix: merging back module list
re-merging the module list to remove unecessary changes.
* networking/stubby.nix: removing unecessary capabilities flag
This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.
* networking/stubby.nix: adding debug level logging bool
Adding the option to turn on debug logging.
* networking/stubby.nix: clarifying idleTimeout and adding systemd target
Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.
* networking/stubby.nix: Restrict options with types.enum
This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.
* networking/stubby.nix: cleaning up documentation
Cleaning up docs, adding literal tags to settings, and removing
whitespace.
* networking/stubby.nix: fixing missing linebreak in comments
* networking/stubby.nix: cleaning errant comments
after seeing
`adjtime failed: Invalid argument` in my syslog, I tried using
`ntpd -s` but it would trigger
`/etc/ntpd.conf: No such file or directory`
see https://github.com/NixOS/nixpkgs/issues/31885
Instead of running the daemon with a specific config file, use the
standard file so that user are able to use the ntp executable without
having to look for the current config file.
Tracking scripts in particular, cannot be included in extraOpts, because script declaration has to be above script usage in keepalived.conf.
Changes are fully backward compatible.
When trying to run NSD to serve the root zone, one gets the following
error message:
error: illegal name: '.'
This is because the name of the zone is used as the derivation name for
building the zone file. However, Nix doesn't allow derivation names
starting with a period.
So whenever the zone is "." now, the file name generated is "root"
instead of ".".
I also added an assertion that makes sure the user sets
services.nsd.rootServer, otherwise NSD will fail at runtime because it
prevents serving the root zone without an explicit compile-time option.
Tested this by adding a root zone to the "nsd" NixOS VM test.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @hrdinka, @qknight
Ubiquiti has both a LTS and current version of their Unifi controller software.
The latter adds new features, but may drop support for some devices.
This adds the capability to use either for the unifi module but defaults
to the LTS version, which was the previous behavior.
This is more in line with what other services do; also looks cleaner.
It changes configuration entries for pre-and post-hooks type to lines from
lists of strings which are more logical for them; coersion is provided for
backwards compatibility.
Finally, add several steps to improve robustness:
1. Load kernel module on start if not loaded;
2. Don't remove wireguard interface on start; it is removed on service stop. If
it's not something is wrong.
Do cleanup of user-created additional rules.
Of course it'd be much better to just use iptables-{save,restore} for
declarative management, but as it's still not there...
a) Some providers can update multiple domains - support that.
b) Make "zone" and "script" configurable. Some providers require these.
c) Instead of leaving the ddclient daemon running all the time, use a systemd
timer to kick it off.
d) Don't use a predefined user - run everything via DynamicUser
e) Add documentation
Currently broken on NixOS due to hardcoded modprobe binary path (see
bug #30756 from Oct 2017), no activity on a proposed fix for months.
As the protocol is terribly broken anyways, let's better remove it
completely, and not talk about anymore ;-)
Closes#30756.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
I determined which options got changed by executing the following
commands in the strongswan repository:
git diff -U20 5.6.0..5.6.1 src/swanctl/swanctl.opt
git diff -U20 5.6.0..5.6.1 conf
The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon
very similar to charon, but it's specifically designed for use with systemd. It uses the
systemd libraries for a native integration.
Instead of using starter and an ipsec.conf based configuration, the daemon is directly
managed by systemd and configured with the swanctl configuration backend.
See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd
Note that the strongswan.conf and swantctl.conf configuration files are automatically
generated based on NixOS options under services.strongswan-swanctl.strongswan and
services.strongswan-swanctl.swanctl respectively.
We want to wait for both stacks to be active before declaring that network is active.
So either both default gateways must be specified or only IPv4 if IPv6 is disabled to
avoid dhcpcd for network-online.target.
network-online.target properly depends on the underlying network
management tool (e.g. NixOS static configuration scripts, dhcpcd,
NetworkManager, networkd) signalling that all interfaces are up and
appropriately configured (to whatever degree possible/required), whereas
network.target only indicates that the network management tool itself
has started.
After the systemd 237 upgrade, radvd wouldn't start anymore because the
PID file cannot be written. It seems that directories in /run has to be
explicitely defined as RuntimeDirectory now. The PID file isn't needed
due to systemd, though, so it was removed along with forking and loggia
via syslog.
This fixes the ipv6 NixOS test.
Inspired from the dhcpd service implementation
Only 2 configurations options at the moment:
- enabled
- path to config directory (defaults to /etc/raddb)
Implementation was also inspired from ArchLinux
systemd file and corrected with @dotlambda and
@fpletz help.
If you have more than 1 User with hasedPassword Option set it generates
```
rm -f /var/lib/mosquitto/passwd
touch /var/lib/mosquitto/passwd
echo 'user1:$6$xxx' > /var/lib/mosquitto/passwd
echo 'user2:$6$xxx' > /var/lib/mosquitto/passwd
```
Which ends up in only having 1 user.
l2tp saves its secrets into /etc/ipsec.d but strongswan would not read
them. l2tp checks for /etc/ipsec.secrets includes /etc/ipsec.d and if
not tries to write into it.
Solution:
Have the strongswan module create /etc/ipsec.d and /etc/ipsec.secrets
when networkmanager_l2tp is installed.
Include /etc/ipsec.secrets in
/nix/store/hash-strongswan/etc/ipsec.secrets so that it can find l2tp
secrets.
Also when the ppp 'nopeerdns' option is used, the DNS resolver tries to
write into an alternate file /etc/ppp/resolv.conf. This fails when
/etc/ppp does not exist so the module creates it by default.
in read-only way. If the cache directory is empty and you use the
very same service for system's DNS, kresd is unable to bootstrap root
trust anchors, as it would need a DNS lookup.
Also, if we don't rely on bootstrap, the extra lua deps of kresd could
be dropped by default, but let's not do that now, as the difference in
closure size is only ~4 MB, and there may be other use cases than
running the package as nixos service this way.
The unnecessary dependency of sockets.target on kresd.service causes a
dependency cycle preventing kresd.service from starting at boot:
sockets.target -> kresd.service -> basic.target -> sockets.target
In commit ec9dc73 restarting NetworkManager after resume from
suspend/hibernate was introduced.
When I initially switch to NixOS I started noticing a high delay between
wakeup and re-connecting to WiFi & wired networks. The delay increased
from a few seconds (on my previous distro, same software stack) to
almost half a minute with NixOS.
I (locally) applied the change in this commit a few weeks ago and tested
since then. The notebook/mobile device experience has improved a lot.
Reconnects are as before switching to NixOS.
Issue #24401 could be related to this. Since I am not using KDE/plasma5
I can only guess…
Tunnel configuration has no member named "host" - i2pd does but it's called "address" in the options. As a result, no tunnel configuration is generated.
* Fix attribute check in inTunnels
* Fix integer to string coercion in inTunnels
* Add destinationPort option for outTunnels
Added the boolean option:
networking.networkmanager.enableStrongSwan
which enables the networkmanager_strongswan plugin and adds
strongswanNM to the dbus packages.
This was contributed by @wucke13, @eqyiel and @globin.
Fixes: #29873
* nghttpx: Add a new NixOS module for the nghttpx proxy server
This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.
* nixos/nghttpx: fix building manual
In the previous version multiple default values would generate an
invalid babeld config file since all options would be concatenated
without any separator.
* Safer defaults for immutable znc config
I just lost all the options I configured in ZNC, because the mutable config was overwritten.
I accept any suggestions on the way to implement this, but overwriting a mutable config by default seems weird. If we want to do this, we should ensure that ZNC does not allow to edit the config via the webmin when cfg.mutable is false.
* Do not backup old config files.
There seems to be little need for backups if mutable becomes a voluntary opt-out.
* fixup
We now wait for dhcpcd to acquire a lease but dhcpcd is restarted on
system activation. As wpa_supplicant is stopped while dhcpcd is
restarting a significant delay is introduced on systems with wireless
network connections only. This changes the wpa_supplicant service to
also be restarted together with dhcpcd in case both services were
changed.
The current version is broken:
- there's no `openFirewall` attribute directly in the `cfg` set
- the `port` option is an attribute of the `confOptions` set
I used the proper attribute for the firewall port and moved the `openFirewall`
option directly up to the `services.znc` set, as it's rather a general option
for the whole service than a znc-specific option (which are located inside the
`confOptions` set).
Sometimes (especially in the default route case) it is required to NOT
add routes for all allowed IP ranges. One might run it's own custom
routing on-top of wireguard and only use the wireguard addresses to
exchange prefixes with the remote host.
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
This reverts commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.
(cherry picked from commit 23a021d12e8f939cd0bfddb1c7adeb125028c1e3)
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.
The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.
This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.
Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.
(cherry picked from commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6)
This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
