The shairport-sync service currently fails to start with the error
shairport avahi_entry_group_new failed
This problem seems to have been introduced by
cdd7310a50
After some trial and error I concluded that the attached commit is a minimal
fix.
Currently NixOS creates the swapfile (with the specified size) only if
it doesn't already exist. Changing the swapfile size afterwards will not
have any effect.
This commit changes that so the swapfile will be recreated whenever
swapDevices.*.size is changed (or more precisely, whenever the actual
file size differs from the configured one), allowing both growing and
shrinking the swapfile.
The service unit has "restartIfChanged = false", so we don't have to
worry about the swapfile being in use at the time this code is run (you
have to reboot for swapfile changes).
fallocate doesn't shrink files, use truncate for that. truncate can also
be used to grow files, but it creates "holes" in the file which doesn't
work with swapfiles.
':' is currently used as separator in /boot/grub/state for the list of
devices GRUB should be installed to. The problem is that ':' itself may
appear in a device path:
/dev/disk/by-id/usb-SanDisk_Cruzer_20043512300546C0B317-0:0
With such a path, NixOS will install GRUB *every* time, because it
thinks the configuration differs from the state file (due to the wrong
list split). Fix it by using ',' as separator.
For existing systems with GRUB installed on multiple devices, this
change means that GRUB will be installed one extra time.
- init gnome-software for gnome3 at 3.18.3
- list gnome-software as an "optional package" for gnome3
- enable packagekit service when gnome3 is enabled
- currently pulled in from Git until the next release of PackageKit
has Nix support
- also: add in a service module to start packagekit properly
- nixos service can be enabled via services.packagekit.enable
- packagekit requires nixunstable to build properly
Fixup regression introduced in commit 1bbcd91b2e
("spacefm: sudo and gksu fixes#15758 and license update").
A missing </filename> end tag caused this:
$ nixos-rebuild build
...
options-db.xml:4402: parser error : Opening and ending tag mismatch: filename line 4401 and para
</para><para><emphasis>Type:</emphasis> boolean</para><para><emphasis>Default:</
^
options-db.xml:4406: parser error : Opening and ending tag mismatch: filename line 4401 and listitem
</filename></member></simplelist></listitem></varlistentry><varliste
^
options-db.xml:4406: parser error : Opening and ending tag mismatch: para line 4401 and varlistentry
</filename></member></simplelist></listitem></varlistentry><varliste
^
options-db.xml:28430: parser error : Opening and ending tag mismatch: listitem line 4401 and variablelist
</filename></member></simplelist></listitem></varlistentry></variablelist
^
options-db.xml:28432: parser error : Premature end of data in tag varlistentry line 4401
- RPi3 successfully gets to U-Boot, but then fails to boot the kernel
due to a missing device tree file. This should get added to the 4.8
kernel release once this patch is merged: https://lkml.org/lkml/2016/6/1/841
- RPi2 is not tested, but it should successfully boot the NixOS image.
Instead of showing this output from "nixos-rebuild switch":
warning: not applying GID change of group ‘munin’
warning: not applying UID change of user ‘ntp’
print this:
warning: not applying GID change of group ‘munin’ (95 -> 102)
warning: not applying UID change of user ‘ntp’ (3 -> 179)
This makes it possible for users to take action and fixup the UIDs/GIDs
that NixOS won't touch.
Fixes issue when upgrading from very old NixOS systems that don't have
systemd-escape in $PATH:
$ sudo nixos-rebuild switch
...
building the system configuration...
updating GRUB 2 menu...
Can't exec "systemd-escape": No such file or directory at /nix/var/nix/profiles/system/bin/switch-to-configuration line 264.
Unable to escape /!
Fixes this (line wrapped):
$ gnome-control-center
[... click on the "Color" item ...]
(gnome-control-center:3977): color-cc-panel-WARNING **: \
The name org.freedesktop.ColorManager was not provided by any .service files
With this patch applied, the above warnings are not printed and the GUI
shows some devices that can be managed (my printer and display). Without
this patch the GUI is empty (non-functional).
(cups will also complain in the journal with a similar message when
doing print jobs, without this patch.)
The docstring for the `services.dbus.packages` configuration option only
mentioned one directory, but the implementation actually looked for DBus
config files in four separate places within the target packages. This
commit updates the docstring to reflect the actual implementation
behaviour.
stripHash uses a global variable to communicate it's computation
results, but it's not necessary. You can just pipe to stdout in a
subshell. A function mostly behaves like just another command.
baseHash() also introduces a suffix-stripping capability since it's
something the users of the function tend to use.
...by adding system-config-printer to services.dbus.packages (if
services.printing.enable is true).
Without this patch, trying to add a printer will result in a little dialog
saying "Failed to add new printer" and gnome-control-center will print this to
the terminal (line wrapped):
(gnome-control-center:3546): printers-cc-panel-WARNING **: \
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: \
The name org.fedoraproject.Config.Printing was not provided by any .service files
system-config-printer supplies the "org.fedoraproject.Config.Printing" dbus
service, thus fixing the problem.
The tests need to expand passed variable and very carefully.
I could see no other easy way than to change single-quoting in
makeWrapper to double-quoting.
The tests now fail with the same problem as on master...
wpa_supplicant fails to start if the wireless interfaces aren't ready yet,
so we need to add a system ordering directive here to start wpa_supplicant
after the interfaces are ready. Note that Requires= is not enough since
it does not imply ordering.
I've failed to figure out what why `paxtest blackhat` hangs the vm, and
have resigned to running individual `paxtest` programs. This provides
limited coverage, but at least verifies that some important features are
in fact working.
Ideas for future work includes a subtest for basic desktop
functionality.
This GID was used to exempt users from Grsecurity's
`/proc` restrictions; we now prefer to rely on
`security.hideProcessInformation`, which uses the `proc` group
for this purpose. That leaves no use for the grsecurity GID.
More generally, having only a single GID to, presumably, serve as the
default for all of grsecurity's GID based exemption/resriction schemes
would be problematic in any event, so if we decide to enable those
grsecurity features in the future, more specific GIDs should be added.
The new module is specifically adapted to the NixOS Grsecurity/PaX
kernel. The module declares the required kernel configurations and
so *should* be somewhat compatible with custom Grsecurity kernels.
The module exposes only a limited number of options, minimising the need
for user intervention beyond enabling the module. For experts,
Grsecurity/PaX behavior may be configured via `boot.kernelParams` and
`boot.kernel.sysctl`.
The module assumes the user knows what she's doing (esp. if she decides
to modify configuration values not directly exposed by the module).
Administration of Grsecurity's role based access control system is yet
to be implemented.
We need to use wrapped modprobe, so that it finds the right
modules. Docker needs modprobe to load overlay kernel module
for example.
This fixes an an error starting docker if the booted system's kernel
version is different from the /run/current-system profile's one.
The update-resolve-conf script from the update-resolv-conf
package is very useful and should work in most of the common
cases, so this adds an option to enable it. The option is
disabled by default for backwards compatibility.
So far the module only allowed for the ccid driver, but there are a lot
of other PCSC driver modules out there, so let's add an option called
"plugins", which boils down to a store path that links together all the
paths specified.
We don't need to create stuff in /var/lib/pcsc anymore, because we
patched pcsclite to allow setting PCSCLITE_HP_DROPDIR.
Another new option is readerConfig, which is especially useful for
non-USB readers that aren't autodetected.
The systemd service now is no longer Type=forking, because we're now
passing the -f (foreground) option to pcscd.
Tested against a YubiKey 4, SCR335 and a REINER SCT USB reader.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @wkennington
This was originally removed in d4d0e449d7.
The intent was not to maintain hydra expression at two places.
Nowadays we have enough devs to maintain this despite copy/pasta.
This should encourage more people to use Hydra, which is a really
great piece of software together with Nix.
Tested a deploy using https://github.com/peti/hydra-tutorial
IceWM is not part of KDE 5 and is now no longer part of the test. KDE 5
applications: Dolphin, System Monitor, and System Settings are started
in this test.
* manual: Mark commands that require root
Mark every command that requires to be run as root by prefixing them
with '#' instead of '$'.
* manual: Add note about commands that require root
Since systemd version 230, it is required to have a machine-id file
prior to the startup of the container. If the file is empty, a transient
machine ID is generated by systemd-nspawn.
See systemd/systemd#3014 for more details on the matter.
This unbreaks all of the containers-* NixOS tests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Closes: #15808
The primary motivation here is to get rid of builderDefs, but now the
resulting font directory is also linked into /run/current-system/sw,
which fixes#15194.
VBoxService needs dbus in order to work properly, which failed to start
up so far, because it was searching in /run/current-system/sw for its
configuration files.
We now no longer run with the --system flag but specify the
configuration file directly instead.
This fixes at least the "simple-gui" test and probably the others as
well, which I haven't tested yet.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We can't use waitForWindow here because it runs xwininfo as user root,
who in turn is not authorized to connect to the X server running as
alice.
So instead, we use xprop from user alice which should fix waiting for
the VirtualBox manager window.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The existence of $root/var/lib/private/host-notify as a socket
prevented a bind mount:
container foo[8083]: Failed to create mount point /var/lib/containers/foo/var/lib/private/host-notify: No such device or address
The VirtualBox tests so far ran the X server as root instead of user
"alice" and it did work, because we had access control turned off by
default.
Fortunately, it was changed in 1541fa351b.
As a side effect, it caused all the VirtualBox tests to fail because
they now can't connect to the X server, which is a good thing because
it's a bug of the VirtualBox tests.
So to fix it, let's just start the X server as user alice.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by d84741a4bf.
The mentioned commit actually is a good thing, because we now get the
output from the X session.
Unfortunately, for the i3wm test, the i3-config-wizard prints out the
raw keyboard symbols directly coming from xcb, so the output isn't
necessarily proper UTF-8.
As the XML::Writer already expects valid UTF-8 input, we assume that
everything that comes into sanitise() will be UTF-8 from the start. So
we just decode() it using FB_DEFAULT as the check argument so that
every invalid character is replaced by the unicode replacement
character:
https://en.wikipedia.org/wiki/Specials_(Unicode_block)#Replacement_character
We simply re-oncode it again afterwards and return it, so we should
always get out valid UTF-8 in the log XML.
For more information about FB_DEFAULT and FB_CROAK, have a look at:
http://search.cpan.org/~dankogai/Encode-2.84/Encode.pm#Handling_Malformed_Data
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This allows setting options for the same LUKS device in different
modules. For example, the auto-generated hardware-configuration.nix
can contain
boot.initrd.luks.devices.crypted.device = "/dev/disk/...";
while configuration.nix can add
boot.initrd.luks.devices.crypted.allowDiscards = true;
Also updated the examples/docs to use /disk/disk/by-uuid instead of
/dev/sda, since we shouldn't promote the use of the latter.
... rather than ~/.xsession-errors. It might make sense to make this
the default, in order to eliminate ad hoc, uncentralised, poorly
discoverable log files.
This ensures that "journalctl -u display-manager" does what you would
expect in 2016. However, the main reason is to ensure that our VM
tests show the output of the X server.
A slight problem is that with KDE user switching, messages from the
various X servers end up in the same place. However, that's an
improvement over the previous situation, where the second X server
would overwrite the /var/log/X.0.log of the first. (This was caused by
the fact that we were passing a hard-coded value for -logfile.)
For now, leave the old implementation under `man-old` attribute.
Small warning: I had a leftover ~/.nix-profile/man from an old package,
which caused man-db's man prefer it and ignore ~/.nix-profile/share/man.
The PATH->MANPATH code just selects the first match for each PATH item.
The motivation is using sudo in chroot nix builds, a somewhat
special edge case I have and pulling system path into chroot
yields to some very nasty bug like
https://github.com/NixOS/nixpkgs/issues/15581
Previously:
$ cat /var/setuid-wrappers/sudo.real
/nix/store/3sm04dzh0994r86xqxy52jjc0lqnkn65-system-path/bin/sudo
After the change:
$ cat /var/setuid-wrappers/sudo.real
/nix/store/4g9sxbzy8maxf1v217ikp69c0c3q12as-sudo-1.8.15/bin/sudo
This reverts commit c25907d072.
I think this commit broke the NixOS service for NetworkManager. At least
with this, and the two previous reverts, everything is back to normal.
(With multiple-outputs split, it would have reduced the closure size by
3 MiB.)
This reverts commit 7ac1ef05fa.
One of a few reverts needed to unbreak networkmanager NixOS service
since the multiple-output split (to save 3 MiB of closure size).
This reverts commit 2875293615.
One of a few reverts needed to unbreak networkmanager NixOS service
since the multiple-output split (to save 3 MiB of closure size).
Move Subsonic state directory from `/var/subsonic` to
`/var/lib/subsonic`, since the general convention is for each
application to put its state directory there.
Also, automatically set the home directory of the `subsonic` user to the
value of `config.services.subsonic.home`, rather than setting it to a
value hardcoded in the module. This keeps the home directory of the
`subsonic` user and the state directory for the Subsonic application in
sync.
leveraging users.users.<user>.createHome instead of a preStart script.
preStart script is still required to ensure proper creation of logging
directory.
This properly implements revert in
0729f60697.
We used to have which='type -P' alias, but really it's best to just
rely on which package, only 88K in size.
cc @edolstra
The chroot caps restriction disallows chroot'ed processes from running
any command that requires `CAP_SYS_ADMIN`, breaking `nixos-rebuild`. See
e.g., https://github.com/NixOS/nixpkgs/issues/15293
This significantly weakens chroot protections, but to break
nixos-rebuild out of the box is too severe.
The list of public proxies is updated now and again and it's probably a
good idea to always work from the most recent list, rather than the one
that is shipped with the release. This can be crucial in case of
resolvers that are revealed to have gone rogue or otherwise have been
compromised.
As @edolstra pointed out that the kernel module might be painful to
maintain. I strongly disagree because it's only a small module and it's
good to have such a canary in the tests no matter how the bootup process
looks like, so I'm going the masochistic route and try to maintain it.
If it *really* becomes too much maintenance burden, we can still drop or
disable kcanary.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We don't want to push out a channel update whenever this test fails,
because that might have unexpected and confused side effects and it
*really* means that stage 1 of our boot up is broken.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We already have a small regression test for #15226 within the swraid
installer test. Unfortunately, we only check there whether the md
kthread got signalled but not whether other rampaging processes are
still alive that *should* have been killed.
So in order to do this we provide multiple canary processes which are
checked after the system has booted up:
* canary1: It's a simple forking daemon which just sleeps until it's
going to be killed. Of course we expect this process to not
be alive anymore after boot up.
* canary2: Similar to canary1, but tries to mimick a kthread to make
sure that it's going to be properly killed at the end of
stage 1.
* canary3: Like canary2, but this time using a @ in front of its
command name to actually prevent it from being killed.
* kcanary: This one is a real kthread and it runs until killed, which
shouldn't be the case.
Tested with and without 67223ee and everything works as expected, at
least on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is a regression test for #15226, so that the test will fail once we
accidentally kill one or more of the md kthreads (aka: if safe mode is
enabled).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Unfortunately, pkill doesn't distinguish between kernel and user space
processes, so we need to make sure we don't accidentally kill kernel
threads.
Normally, a kernel thread ignores all signals, but there are a few that
do. A quick grep on the kernel source tree (as of kernel 4.6.0) shows
the following source files which use allow_signal():
drivers/isdn/mISDN/l1oip_core.c
drivers/md/md.c
drivers/misc/mic/cosm/cosm_scif_server.c
drivers/misc/mic/cosm_client/cosm_scif_client.c
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
drivers/staging/rtl8188eu/core/rtw_cmd.c
drivers/staging/rtl8712/rtl8712_cmd.c
drivers/target/iscsi/iscsi_target.c
drivers/target/iscsi/iscsi_target_login.c
drivers/target/iscsi/iscsi_target_nego.c
drivers/usb/atm/usbatm.c
drivers/usb/gadget/function/f_mass_storage.c
fs/jffs2/background.c
fs/lockd/clntlock.c
fs/lockd/svc.c
fs/nfs/nfs4state.c
fs/nfsd/nfssvc.c
While not all of these are necessarily kthreads and some functionality
may still be unimpeded, it's still quite harmful and can cause
unexpected side-effects, especially because some of these kthreads are
storage-related (which we obviously don't want to kill during bootup).
During discussion at #15226, @dezgeg suggested the following
implementation:
for pid in $(pgrep -v -f '@'); do
if [ "$(cat /proc/$pid/cmdline)" != "" ]; then
kill -9 "$pid"
fi
done
This has a few downsides:
* User space processes which use an empty string in their command line
won't be killed.
* It results in errors during bootup because some shell-related
processes are already terminated (maybe it's pgrep itself, haven't
checked).
* The @ is searched within the full command line, not just at the
beginning of the string. Of course, we already had this until now, so
it's not a problem of his implementation.
I posted an alternative implementation which doesn't suffer from the
first point, but even that one wasn't sufficient:
for pid in $(pgrep -v -f '^@'); do
readlink "/proc/$pid/exe" &> /dev/null || continue
echo "$pid"
done | xargs kill -9
This one spawns a subshell, which would be included in the processes to
kill and actually kills itself during the process.
So what we have now is even checking whether the shell process itself is
in the list to kill and avoids killing it just to be sure.
Also, we don't spawn a subshell anymore and use /proc/$pid/exe to
distinguish between user space and kernel processes like in the comments
of the following StackOverflow answer:
http://stackoverflow.com/a/12231039
We don't need to take care of terminating processes, because what we
actually want IS to terminate the processes.
The only point where this (and any previous) approach falls short if we
have processes that act like fork bombs, because they might spawn
additional processes between the pgrep and the killing. We can only
address this with process/control groups and this still won't save us
because the root user can escape from that as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #15226
Instead of using this option, please modify the dovecot package by means of an
override. For example:
nixpkgs.config.packageOverrides = super: {
dovecot = super.dovecot.override { withPgSQL = true; };
};
Closes https://github.com/NixOS/nixpkgs/issues/14097.
Just removing the system argument because it doesn't exist (it's
actually config.nixpkgs.system, which we're already using). We won't get
an error anyway if we're not actually using it, so this is just an
aesthetics fix.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Make sure that we always have everything available within the store of
the VM, so let's evaluate/build the test container fully on the host
system and propagate all dependencies to the VM.
This way, even if there are additional default dependencies that come
with containers in the future we should be on the safe side as these
dependencies should now be included for the test as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @kampfschlaefer, @edolstra
This partially reverts f2d24b9840.
Instead of disabling the channels via removing the channel mapping from
the tests themselves, let's just explicitly reference the stable test in
release.nix. That way it's still possible to run the beta and dev tests
via something like "nix-build nixos/tests/chromium.nix -A beta" and
achieve the same effect of not building beta and dev versions on Hydra.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It's not the job of Nixpkgs to distribute beta versions of upstream
packages. More importantly, building these delays channel updates by
several hours, which is bad for our security fix turnaround time.
* Perform HTTP HEAD request instead of full GET (lighter weight)
* Don't log output of curl to the journal (it's noise/debug)
* Use explicit http:// URL scheme
* Reduce poll interval from 10s to 2s (respond to state changes
quicker). Probably not relevant on boot (lots of services compete for
the CPU), but online service restarts/reloads should be quicker.
* Pass --fail to curl (should be more robust against false positives)
* Use 4 space indent for shell code.
The current postStart code holds Jenkins off the "started" state until
Jenkins becomes idle. But it should be enough to wait until Jenkins
start handling HTTP requests to consider it "started".
More reasons why the current approach is bad and we should remove it,
from @coreyoconnor in
https://github.com/NixOS/nixpkgs/issues/14991#issuecomment-216572571:
1. Repeatedly curling for a specific human-readable string to
determine "Active" is fragile. For instance, what happens when jenkins
is localized?
2. The time jenkins takes to initializes is variable. This (at least
used to) depend on the number of jobs and any plugin upgrades requested.
3. Jenkins can be requested to restart from the UI. Which will not
affect the status of the service. This means that the service being
"active" does not imply jenkins is initialized. Downstream services
cannot assume jenkins is initialized if the service is active. Might
as well accept that and remove the initialized test from service
startup.
Fixes#14991.
Regression introduced by dfe608c8a2.
The commit turns the two arguments into one attrset argument so we need
to adapt that to use the new calling convention.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This allows to use <olink> tags inside NixOS options to reference
sections from the manual. I've originally introduced it in #14476 to
reference the Taskserver specific documentation from the options
reference but as suggested by @nbp, this was done as a separate pull
request to ensure greater visibility rather than being "hidden" in the
Taskserver branch.
The build time for the manual is around 30s on my machine without this
change and 34s with this change, so it shouldn't have a very big impact
on the build time of the manual.
Olinks between the options reference and the manual now will look like
this:
"More instructions about NixOS in conjuction with Taskserver can be
found in the NixOS manual at Chapter 15, Taskserver."
More documentation about olinks can be found here:
http://www.sagehill.net/docbookxsl/Olinking.html
Acked-by: Eelco Dolstra <eelco.dolstra@logicblox.com>
A sane backend for recent brother scanners.
Depends on the presence of etc files generated by the
nixos module of the same name.
Supports network scanner specification through the
nixos module.
The Nix store squashfs is stored inside the initrd instead of separately
(cherry picked from commit 976fd407796877b538c470d3a5253ad3e1f7bc68)
Signed-off-by: Domen Kožar <domen@dev.si>
A user noticed the example for `hosts`, took the `mode` permissions literally, and ended up with surprising behavior on their system. Updating the documentation to not reference a real config file which might have real permissions requirements.
