As @lopsided98 points out in #105305, since the hashes are now target
sensative, and until we find reason to actually care to test what they
are exactly, we are best just normalizing them away in the tests.
Bofore this change, NUM_JOBS was set to 1. Some crates for building
C/C++ code (e.g. the cc and cmake crates), rely on this variable to
set the number of jobs. As a consequence, we were compiling embedded
libraries serially. Change this to NIX_BUILD_CORES to permit parallel
builds.
Prior discussion:
https://github.com/NixOS/nixpkgs/pull/50452#issuecomment-439407547
This enables short argument attrsets similar to fetchPypi:
src = fetchCrate {
inherit pname version;
sha256 = "02h8pikmk19ziqw9jgxxf7kjhnb3792vz9is446p1xfvlh4mzmyx";
};
While the artifacts from `buildPhase` should be used for testing as
well, it should be avoided that those are modified during `checkPhase`.
This can happen if a package is built e.g. with special
`cargoBuildFlags` that don't apply to the `checkPhase`. In that case, a
binary would be installed into `$out` without those flags since
`checkPhase` overrides the binary in the `target`-directory.
This patch copies the state of `target/release` into a temporary
location at the end of the `buildPhase` and installs the results from
that temporary directory into `$out` while `checkPhase` can continue
using the configured build-dir.
cc #91689Closes#93119Closes#91191
When features were supplied in cargoBuildFlags, the binaries were built
with these features enabled. Unless checking was disabled, `cargo test`
was executed without these build flags, meaning the binaries were
rebuilt and overwritten without the specified features.
Fix this bug by running tests after the installation phase.
Cargo sets `CARGO_FEATURE_*` for all features when running a build
script:
https://doc.rust-lang.org/cargo/reference/environment-variables.html#environment-variables-cargo-sets-for-build-scripts
Some crates have build scripts (e.g. openblas-src) that rely on the
feature variables being properly set.
Since we now need several representations of features, this change
also updates `createFeatures` to be a list of features, rather than
`rustc` feature arguments. `configureCrate` and `buildCrate` then
build the required representations as-needed.
Fixes#68978
There are several tarballs (such as the `rust-lang/rust`-source) with a
`Cargo.toml` at root and several sub-packages (with their own Cargo.toml)
without using workspaces[1].
In such a case it's needed to move into a subdir to only build the
specified sub-package (e.g. `rustfmt` or `rsl`), however the artifacts
are at `/target` in the root-dir of the build environment. This breaks
the build since `buildRustPackage` searches for executables in `target`
(which is at the build-env's root) at the end of the `buildPhase`.
With the optional `buildAndTestSubdir`-argument, the builder moves into
the specified subdir using `pushd`/`popd` during `buildPhase` and
`checkPhase`.
Also moved the logic to find executables and libs to the end of the `buildPhase`
from a custom `postBuild`-hook to fix packages with custom `build`/`install`-procedures
such as `uutils-coreutils`.
[1] https://doc.rust-lang.org/book/ch14-03-cargo-workspaces.html
If a user provides `nativeBuildInputs = [ llvmPackages.bintools ]` or any other
package containing a `${prefix}/bin/diff`, the builder could use it instead
of the standard unix `diff`, causing a build failure.
This updates the call to specify an abspath to `diff` and avoid reliance on `PATH`.
Resolves#87081
When running `cargo test --release`, the artifacts from `buildPhase`
will be reused here. Previously, most of the stuff had to be recompiled
without optimizations.
I know, heretic, but...
I also know that this is not perfect but it is a good start, I think. It
would be nice if this were part of the automatic "nixdoc" function
reference. I'd like guidance if this should be part of the rust section
or something else.
As it turns out Darwin does most of the things differently then "normal"
systems. They are using a different shared library extension and require
an obscure commandline parameter that has to be added to every build
system out there. That issue seems to be with clang on Darwin as on
Linux that flag isn't required to build the very same tests (when using
clang).
After adjusting these two details the tests are running fine on the
darwin box that I was able to obtain.
According to the Cargo documentation:
> The build script does not have access to the dependencies listed in
> the dependencies or dev-dependencies section (they’re not built
> yet!). Also, build dependencies are not available to the package
> itself unless also explicitly added in the [dependencies] table.
https://doc.rust-lang.org/cargo/reference/build-scripts.html
This change separates linkage of regular dependencies and build
dependencies.
* Make errors include the crate name and make them much more prominent.
* Move more code into lib.sh
* Already source generated logging code and lib.sh in configure
The inlined readme that we were iterating on has been moved to GitHub
issue #79975, and the default is now the new cargo fetcher, so this
doc comment is out of date.
Previously, we would asssert that the lockfiles are consistent during the
unpackPhase, but if the pkg has a patch for the lockfile itself then we must
wait until the patchPhase is complete to check.
This also removes an implicity dependency on the src attribute coming from
`fetchzip` / `fetchFromGitHub`, which happens to name the source directory
"source". Now we glob for it, so different fetchers will work consistently.
Changes the default fetcher in the Rust Platform to be the newer
`fetchCargoTarball`, and changes every application using the current default to
instead opt out.
This commit does not change any hashes or cause any rebuilds. Once integrated,
we will start deleting the opt-outs and recomputing hashes.
See #79975 for details.
The readme was nice to discuss in the implementation PR, but now that this is
merged it's better to have an issue that can be linked against in PRs and
doesn't require further merges to update status.
Ported with a status update in #79975
By overriding each dependency on every level of the dependency tree we
are creating a lot of unnecessary instances of the same derivation
Looking at the output size of `nix-instantiate --trace-function-calls
-vvvv …` and the execution time I got about a 10x improvement after
applying this change.
It was probably good intentions that lead to these overrides but in
practice no tooling (that I know of) really needs this. `carnix` and
`crate2nix` are fine without those overrides. Furthermore I believe that
it is the job of the tooling around `buildRustCrate` to provide a
coherent set of overrides. By not enforcing all of the overrides, debug
flags, verbosity, … to be the same throughout the closure we also allow
consumers to override specific aspects of the crates. Some (older?)
crates might need different `crateOverrides` then newer crates with the
same name. Currently such situations can not (easily) be implemented
with the override in-place.
This has several advantages:
1. It takes up less space on disk in-between builds in the nix store.
2. It uses less space in the binary cache for vendor derivation packages.
3. It uses less network traffic downloading from the binary cache.
4. It plays nicely with hashed mirrors like tarballs.nixos.org, which only
substitute --flat hashes on single files (not recursive directory hashes).
5. It's consistent with how simple `fetchurl` src derivations work.
6. It provides a stronger abstraction between input src-package and output
package, e.g., it's harder to accidentally depend on the src derivation at
runtime by referencing something like `${src}/etc/index.html`. Likewise, in
the store it's harder to get confused with something that is just there as a
build-time dependency vs. a runtime dependency, since the build-time
src dependencies are tarred up.
Disadvantages are:
1. It takes slightly longer to untar at the start of a build.
As currently implemented, this attaches the compacted vendor.tar.gz feature as a
rider on `verifyCargoDeps`, since both of them are relatively newly implemented
behavior that change the `cargoSha256`.
If this PR is accepted, I will push forward the remaining rust packages with a
series of treewide PRs to update the `cargoSha256`s.
Previously I did use `runCommand` to do the same. Using
releaseTools.aggregate seems a lot saner and we might get nicer hydra
output of the tests that are failing.
It used to be the case (ref missing) that cargo did treat
`src/$libName.rs` as an alternative to `src/lib.rs` when the latter
wasn't present. Recently I failed to reproduce that with vanilla cargo
and it started to cause pain with some crates of the form:
some_crate/
`- src
`- main.rs
`- some_crate.rs
We would build `src/some_crate.rs` and thing it is a library while that
might not be the actual case. This crate is a valid `bin` crate not a
`lib` crate as far as I can tell from the samples I took.
I removed support for the previously required heuristic and commented
out the test cases in case we will need them again. We could crawl in
the Git history but chances are that the next person looking into this
doesn't know about the history.
When this fails, the user may want to copy-paste the path to the "bad"
Cargo.lock file to inspect. The trailing `.` on `$cargoDeps.` gets caught in
most terminal copy-pastes. Since half the lines already don't have it, this
removes it from all of them for consistent output.
This helps us instruct rustc to build tests instead of binaries. The
actual build will then ONLY produce test executables. This is a first
step towards having rust crate tests within nixpkgs.
We default back to only a single output in test cases since that is the
only reasonable thing to do here.
Producing libraries or binaries in addition to tests would theoretically
be feasible but usually generates different dependency trees. It is very
common to have some libraries in `[dev-depdendencies]` within Cargo.toml
just for your tests. To not start mixing things up going with a
dedicated derivation for the test build sounds like the best choice for
now.
To use this you must provide a proper test dependency chain to
`buildRustCrate` (as you would usually do with your non-test inputs).
And then set the `buildTests` attribute to `true`. The derivation will
then contain all tests that were built in `$out/tests`. All common test
patterns and directories should be supported and tested by this change.
Below is an example how you would run a single test from the derivation.
This commit contains some more examples in the `buildRustCrateTests`
attribute set that might be helpful.
```
let
drv = buildRustCrate {
…
buildTests true;
};
in runCommand "test-my-crate" {} ''
touch $out
exec ${drv}/tests/my-test
''
```
While unifying most of the lib function calls I accidentially changed
the filterSource functions as well. Since there were no tests I ended
up forgetting about this case (even thought I ran into it…).
Most stdenv wrappers already work like this -- it allows greater
customisation. We just have to be careful to remove arguments we're
using that shouldn't be passed to stdenv. I've been conservative
here, because fetchcargo checksums shouldn't change lightly.
The previous lines were only different in the kind of dependencies but
otherwise exactly the same. It makes the entire thing a bit more
readable by moving this into a function that takes care of this.
We can get rid of a bunch of workarounds that were in the build script
before by just passing on the `crateBin` attribute.
Before we converted the list of attributes to a string only to convert
it back in bash during the build phase. We can do the entire looping
through builds in Nix and thus need no conversion and parsing of
attributes over and over again.
The big part that still remains bash is the heuristic that cargo
introduced and that we can't do at eval time.
That code had been in the derivation for a while but no explanation was
given why that is needed. It might be helpful to our future selfs to
document why things are done the way they are.
The expression is already long and confusing enough without the color
stuff sprinkled in. Moving it to a dedicated file makes sense.
I switched a bit of the color support code to pure Nix since there
wasn't much point in doing that in bash while we can just do it in Nix.
We can just use `lib` instead of `builtins` in all cases but the
`hashString` case. Also changed a few lines to make use of some optional
helpers from lib.
This cuts down the dependency tree on some rust builds where a crate not
just exposes a binary but also a library. `$out/lib` contained a bunch
of extra support files that among other information carry linker flags
(including the full path to link-time dependencies). Worst case this led
to some binary outputs depending on the full build closure of rust
crates.
Moving all the `$out/lib` files to `$lib/lib` solves this nicely.
`lib` might be a bit weird here as they are most of the time just rlib
files (rust libraries). Those are essential only required during
compilation but they can also be shared objects (like with traditional
C-style packages). Which is why I went with `lib` for the new output.
One of the caveats we are running into here is that we do not (always)
know ahead of time of a crate produces just a library or just a binary.
Cargo allows for some ambiguity regarding whether or not a crate
provides one, two, … binaries and libraries as it's outputs. Ideally we
would be able to rely on the `crateType` entirely but so far that isn't
the case. More work on that area might show how difficult that actually
is.
