Currently there are two calls to curl in the reloadScript, neither which
check for errors. If something is misconfigured (like wrong authToken),
the only trace that something wrong happened is this log message:
Asking Jenkins to reload config
<h1>Bad Message 400</h1><pre>reason: Illegal character VCHAR='<'</pre>
The service isn't marked as failed, so it's easy to miss.
Fix it by passing --fail to curl.
While at it:
* Add $curl_opts and $jenkins_url variables to keep the curl command
lines DRY.
* Add --show-error to curl to show short error message explanation when
things go wrong (like HTTP 401 error).
* Lower-case the $CRUMB variable as upper case is for exported environment
variables.
The new behaviour, when having wrong accessToken:
Asking Jenkins to reload config
curl: (22) The requested URL returned error: 401
And the service is clearly marked as failed in `systemctl --failed`.
When privateNetwork is enabled, currently the container's interface name
is derived from the container name. However, there's a hard limit
on the size of interface names. To avoid conflicts and other issues,
we set a limit on the container name when privateNetwork is enabled.
Fixes#38509
This also includes a full end-to-end CockroachDB clustering test to
ensure everything basically works. However, this test is not currently
enabled by default, though it can be run manually. See the included
comments in the test for more information.
Closes#51306. Closes#38665.
Co-authored-by: Austin Seipp <aseipp@pobox.com>
Signed-off-by: Austin Seipp <aseipp@pobox.com>
The new reuse behaviour is cool and really useful but it breaks one of
my use cases. When using kexec, I have a script which will unlock the
disks in my initrd. However, do_open_passphrase will fail if the disk is
already unlocked.
According to the dbus-launch documentation [0] "--exit-with-session"
shouldn't be used: "This option is not recommended, since it will
consume input from the terminal where it was started; it is mainly
provided for backwards compatibility." And it also states: "To start a
D-Bus session within a text-mode session, do not use dbus-launch.
Instead, see dbus-run-session(1)."
The new wrapper also avoids starting an additional D-Bus session if
DBUS_SESSION_BUS_ADDRESS is already set.
Fix#51303.
[0]: https://dbus.freedesktop.org/doc/dbus-launch.1.html
[1]: https://dbus.freedesktop.org/doc/dbus-run-session.1.html
As the comment notes, restarts/exits of dhcpcd generally require
restarting the NTP service since, if name resolution fails for a pool of
servers, the service might break itself. To be on the safe side, try
restarting Chrony in these instances, too.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Setting the server list to be empty is useful e.g. for hardware-only
or virtualized reference clocks that are passed through to the system
directly. In this case, initstepslew has no effect, so don't emit it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This is to try and squeeze more lost space from the image, so that hydra
starts building it again.
The fsck previous to the resize2fs is required so resize2fs works.
The one afterwards is a sanity check.
Using `-M` from resize2fs will not give much saved space due to a known
(in the manual) issue.
```
[samueldr@aarch64:~/nixpkgs]$ ls -lh result-*/*/*.img
-r--r--r-- 1 root root 2.2G Jan 1 1970 result-original/sd-image/nixos-sd-image-18.09.git.a7fd431-aarch64-linux.img
-r--r--r-- 1 root root 2.1G Jan 1 1970 result-M/sd-image/nixos-sd-image-18.09.git.a7fd431-aarch64-linux.img
-r--r--r-- 1 root root 1.9G Jan 1 1970 result-slimmed/sd-image/nixos-sd-image-18.09.git.a7fd431-aarch64-linux.img
```
```
[samueldr@aarch64:~/nixpkgs]$ nix path-info -S ./result-original
/nix/store/c8k9n78gylx293rjh762fr05a069kxp2-nixos-sd-image-18.09.git.a7fd431-aarch64-linux.img 3844125000
[samueldr@aarch64:~/nixpkgs]$ nix path-info -S ./result-slimmed
/nix/store/962238skj5mnzhrsmjy23dyzmxk77sp4-nixos-sd-image-18.09.git.a7fd431-aarch64-linux.img 3447473208
```
Part of #49783. NextCloud tracks in its `config.php` the application's
state which makes it hard for the module to modify configurations during
upgrades.
It will take time until the issue is properly fixed, therefore we
decided to warn about this in the manual.
This PR addresses two things:
* Adding a basic example for nextcloud. I figured it to be helpful to
add some basic usage instructions when adding a new manual entry.
Advanced documentation may follow later.
For now this document actively links to the service options, so users
are guided to the remaining options that can be helpful in certain
cases.
* Add a warning about upgrades and manual changes in
`/var/lib/nextcloud`. This will be fixed in the future, but it's
definetely helpful to document the current issues in the manual (as
proposed in https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-439691127).
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
* modularity: Document the ability to use non-files in imports
* Update nixos/doc/manual/configuration/modularity.xml
Co-Authored-By: Baughn <svein@google.com>
This allows, finally, proper detection when postgresql is ready to
accept connections. Until now, it was possible that services depending
on postgresql would fail in a race condition trying to connect
to postgresql.
ZFS's popularity is growing, and not including it by default is a
bit frustrating. On top of that, the base iso includes ZFS
_anyway_ due to other packages depending upon it.
I think we're in the clear to do this on the basis that Oracle
probably doesn't care, it is probably fine (the SFLC agrees) and
we're a small fish. If a copyright holder asks us to, we can
definitely revert it again.
This reverts commit 33d07c7ea9.
This fixes some quirks I introduced in previous commits.
1. No need for an extra newline when printing the output of shell commands.
2. 'or die' is what's already used in the NixOS test sources, while
'die unless' has no occurrences.
When reworking the rspamd workers I disallowed `proxy` as a type and
instead used `rspamd_proxy` which is the correct name for that worker
type. That change breaks peoples existing config and so I have made this
commit which allows `proxy` as a worker type again but makes it behave
as `rspamd_proxy` and prints a warning if you use it.
This commit adds an assertion that checks that either `configFile` or
`configuration` is configured for alertmanager. The alertmanager config
can not be an empty attributeset. The check executed with `amtool` fails
before the service even has the chance to start. We should probably not
allow a broken alertmanager configuration anyway.
This also introduces a test for alertmanager configuration that piggy
backs on the existing prometheus tests.
The nixos test is a bit misleading, as the given nginx configuration
would always cause gitlab to redirect to localhost, which is clearly not
what you want in a production setup.
Instead we now enable services.nginx.recommendedProxySettings,
curl against http://gitlab, and assure we get redirected to that same
hostname, too.
Previously I got the following error message:
```
error: opening file '/home/ma27/Projects/nixpkgs/nixos/modules/installer/default.nix': No such file or directory
```
Probably related to 6c68fbd4e1.
Mininet (https://github.com/mininet/mininet) is a popular network emulator that
glues several components such as network namespaces, traffic control
commands into a set of python bindings. It is then "easy" to describe a
topology and run experiments on it.
The default of systemd is to kill the
the whole cgroup of a service. For slurmd
this means that all running jobs get killed
as well whenever the configuration is updated (and activated).
To avoid this behaviour we set "KillMode=process"
to kill only slurmd on reload. This is how
slurm configures the systemd service.
See:
https://bugs.schedmd.com/show_bug.cgi?id=2095#c24508f866ea1
previously one of the tests would fail with
boot-after-install: starting vm
Path length (109) is longer than maximum supported length (108) and will be truncated at /nix/store/0ingn8cwwnl84i374hcl6nafsm2c5m2p-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi/Socket.pm line 872, <__ANONIO__> line 268.
boot-after-install# qemu-system-x86_64: -monitor unix:./monitor: Failed to connect socket ./monitor: No such file or directory
error: QEMU died prematurely
QEMU died prematurely
vde_switch: EOF on stdin, cleaning up and exiting
cleaning up
builder for '/nix/store/zbpxwwxwy7f6z5z3kg4nf5mjqsywzjvx-vm-test-run-installer-filesystemEncryptedWithKeyfile.drv' failed with exit code 4
Shortening the test name fixes the issue.
It's a quick approximation to unblock unstable channels after #48116.
This commit isn't ideal, as I suspect most wayland users won't have
xserver.enable, so they will lose the icon cache in case they had gtk
in system path (otherwise they didn't get cache anyway).
I considered using environment.noXlibs, but the nixos tests installing
headless systems do *not* get that option, so we would still be pulling
gtk in many cases where it's clearly not desired. We need to design
this more carefully.
Otherwise netdata will not find python modules.
To make sure netdata still pick up our setuid version of apps.plugin
we rename the original executable.
These days build systems are more robust w.r.t. to concurrency.
Most users will have at least two cores in their machines.
Therefore I suggest to increase the number of cores used for building.
fixes#50376
Imports the `journaldriver` module into the top-level NixOS module
list to make it usable without extra work.
This went unnoticed in #42134 (mostly because my setup imports modules
explicitly from pinned versions).
Fixes#50390
Based on reports X wouldn't start out of the box and seems OK now.
In case there are still some problems, we can improve later.
I checked that nixos.tests.virtualbox.* still succeed.
This will make the list much easier to re-use, eg. for `nixosTests`
The drawback is that this approaches makes the
```
nix-build release.nix -A tests.opensmtpd.x86_64-linux
```
command about twice as slow (3s to 6s): it now has to evaluate `nixpkgs`
once for each architecture, instead of just having the hardcoded list of
tests that allowed to say “ok just evaluate for x86_64-linux”.
On the other hand, complete evaluation of `release.nix` should be much
faster because we no longer import `nixpkgs` for each test: testing with
the following command went from 30s to 18s, and that's just for a few
tests.
```
time nix-instantiate --eval --strict nixos/release.nix -A tests.nat
```
I initially wanted to test on the whole `release.nix`, but there are too
many broken tests and it takes too long to eval them all, especially
compared to the fact that the current implementation breaks some setup.
Given developers can just `nix-build nixos/tests/my-test.nix`, it sounds
like an overall win.
By using types.lines for 'config', we can specify monit configurations
in lots of modules and they can all be automatically combined together
with newlines. This is desireable because different modules might want
to each specify the small monitoring task specific to their service.
This commit also updates the module to use current idioms.
The `rmilter` module has options for configuring `postfix` to use it but
since that module is deprecated because rspamd now has a builtin worker
that supports the milter protocol this commit adds similar `postfix`
integration options directly to the `rspamd` module.
* Added license: GPLv2.
* Updated homepage and description.
* CFLAGS are no longer necessary as of version 2.2.0.
* Option '-a ::' is no longer necessary as of version 2.2.0.
