This is to facilitate units that should _only_ be manually started and
not activated when a configuration is switched to.
More specifically this is to be used by the new Nixops deploy-*
targets created in https://github.com/NixOS/nixops/pull/1245 that are
triggered by Nixops before/after switch-to-configuration is called.
Previously, socket units wouldn't be restarted if they were
changed. To restart the socket, the service the socket is attached
to needs to be stopped first before the socket can be restarted.
The new systemd in 19.09 gives an "Access Denied" error when doing
"systemctl daemon-reexec" on an 19.03 system. The fix is to use the
previous systemctl to signal the daemon to re-exec itself. This
ensures that users don't have to reboot when upgrading from NixOS
19.03 to 19.09.
This change was only a temporary workaround and isn't required anymore,
since /etc/systemd/system/system.slice should not be present on any
recent NixOS system (which makes this change a no-op).
This reverts commit 7098b0fcdf.
The autoupgrade service defined in `system.autoUpgrade`
(`nixos/modules/installer/tools/auto-upgrade.nix`) doesn't have `su` in
its path and thus yields a warning during the `daemon-reload`.
Specifying the absolute path fixes the issue.
Fixes#47648
This fixes an issue with shells like fish that are not fully POSIX
compliant. The syntax `ENV=val cmd' doesn't work properly in there.
This issue has been addressed in #45932 and #45945, however it has been
recommended to use a single shell (`stdenv.shell' which is either
`bash' or `sh') to significantly reduce the maintenance overload in the
future.
See https://github.com/NixOS/nixpkgs/issues/45897#issuecomment-417923464Fixes#45897
/cc @FRidh @xaverdh @etu
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
Problem: Restarting (stopping) system.slice would not only stop X11 but
also most system units/services. We obviously don't want this happening
to users when they switch from 18.03 to 18.09 or nixos-unstable.
Reason: The following change in systemd:
d8e5a93382
The commit adds system.slice to the perpetual units, which means
removing the unit file and adding it to the source code. This is done so
that system.slice can't be stopped anymore but in our case it ironically
would cause this script to stop system.slice because the unit file was
removed (and an older systemd version is still running).
Related issue: https://github.com/NixOS/nixpkgs/issues/39791
Fixes#28443
Fixed few invocations to `systemctl` to have an absolute path. Additionally add
LOCALE_ARCHIVE so that perl stops spewing warning messages.
We only care about /nix/store because its contents might be out of
sync with /nix/var/nix/db. Syncing other filesystems might cause
unnecessary delays or hangs (e.g. I encountered a case where an NFS
mount was taking a very long time to sync).
This fixes two bugs:
* When socket activation is detected, the service itself is added to stop-start list instead of its sockets.
* When service is marked to restart instead of stop (`StopIfChanged = no`) we don't need to restart sockets.
Fixes issue when upgrading from very old NixOS systems that don't have
systemd-escape in $PATH:
$ sudo nixos-rebuild switch
...
building the system configuration...
updating GRUB 2 menu...
Can't exec "systemd-escape": No such file or directory at /nix/var/nix/profiles/system/bin/switch-to-configuration line 264.
Unable to escape /!
It's not entirely clear why this happens, but sometimes /proc/1/exe
returns a bogus value, like
/ar3a3j6b9livhy5fcfv69izslhgk4gcz-systemd-217/lib/systemd/systemd. In
any case, we can just conservatively assume that we need to restart
systemd when this happens.
Fixes#10261.
Clearly it would be the best if we'd directly generate mount units
instead of converting /etc/fstab. But in order to do that we need to
test it throughly so this approach is for the next stable release.
This fix however is intended for inclusion into release-14.12 and
release-15.09.
Using a simple regular expression unfortunately isn't sufficient for
proper mount unit name quoting/escaping and there is a utility in
systemd called systemd-escape which does nothing less than that.
Of course, using an external program to escape the unit name is way more
expensive and causes us to fork for each mount point.
But given that we already do quite a lot of forks just for unit starting
and stopping, I think it doesn't matter that much. Well, except if you
have a whole bunch of mount points.
However, if the latter is the case and you have thousands of mount
points, you probably have stumbled over this already if your mount point
contains a dash.
As for my motivation to fix this: I've stumbled on this while trying to
fix the "none" backend test for NixOps (see NixOS/nixops#350), where the
target machines use /nix/.ro-store and /nix/.rw-store as mount points.
The implementation we had so far did improperly escape it so those mount
points got the following unit files:
* nix-.ro-store.mount
* nix-.rw-store.mount
The correct names for these units are however:
* nix-.ro\x2dstore.mount
* nix-.rw\x2dstore.mount
So using systemd-escape now properly generates these names.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Many bus clients get hopelessly confused when dbus-daemon is
restarted. So let's not do that.
Of course, this is not ideal either, because we end up stuck with a
possibly outdated dbus-daemon. But that issue will become irrelevant
in the glorious kdbus-based future.
Hopefully this also gets rid of systemd getting stuck after
dbus-daemon is restarted:
Apr 01 15:37:50 mandark systemd[1]: Failed to register match for Disconnected message: Connection timed out
Apr 01 15:37:50 mandark systemd[1]: Looping too fast. Throttling execution a little.
Apr 01 15:37:51 mandark systemd[1]: Looping too fast. Throttling execution a little.
...
Since we restart all active target units (of which there are many),
it's hard to see the units that actually matter. So don't print that
we're starting target units that are already active.
‘nixos-rebuild dry-activate’ builds the new configuration and then
prints what systemd services would be stopped, restarted etc. if the
configuration were actually activated. This could be extended later to
show other activation actions (like uids being deleted).
To prevent confusion, ‘nixos-rebuild dry-run’ has been renamed to
‘nixos-rebuild dry-build’.
Now that dbus reload has been moved before restarting units,
the reload may fail if dbus has been stopped before.
The reload-or-restart will reload dbus if it's active,
otherwise start it.
Otherwise, when switching from systemd 203 to 212, you get errors like:
Failed to stop remote-fs.target: Bad message
Failed to stop systemd-udevd-control.socket: Bad message
...
This seems to have combined badly with the systemd upgrade, we'll revert
for now and revisit after the 14.04 branch.
This reverts commit ad80532881, reversing
changes made to 1c5d3c7883.
If you define a unit, and either systemd or a package in
systemd.packages already provides that unit, then we now generate a
file /etc/systemd/system/<unit>.d/overrides.conf. This makes it
possible to use upstream units, while allowing them to be customised
from the NixOS configuration. For instance, the module nix-daemon.nix
now uses the units provided by the Nix package. And all unit
definitions that duplicated upstream systemd units are finally gone.
This makes the baseUnit option unnecessary, so I've removed it.
switch-to-configuration.pl is currently hard-coded to assume that if a
unit is in the "auto-restart" state that something has gone wrong, but
this is not strictly true. For example, I run offlineimap as a oneshot
service restarting itself every minute (on success). NixOS currently
thinks that offlineimap has failed to start as it enters the
auto-restart state, because it doesn't consider why the unit failed.
This commit changes switch-to-configuration.pl to inspect the full
status of a unit in auto-restart state, and now only considers it failed
if the ExecMainStatus is non-zero.
Currently switch-to-configuration.pl uses system() calls to interact
with DBus. This can be error prone, especially when we are parsing
output that could change. In this commit, almost all calls to the
systemctl binary have been replaced with equivalent operations via DBus.
