This module allows root autoLogin, so we would break that for users, but
they shouldn't be using it anyways. This gives the impression like auto
is some special display manager, when it's just lightdm and special pam
rules to allow root autoLogin. It was created for NixOS's testing
so I believe this is where it belongs.
Will be unsupported within the lifespan of 20.03. Also there aren't any
known issues that require this version as workaround, so a removal
should be fairly safe.
* nixos/doc: add a section mentioning GitHub team for nixos release managers
This team should be kept up-to-date with each release.
Previously this info had to be grepped from appropriate Discourse thread.
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
As of 2020-01-09, way-cooler is officially dead:
http://way-cooler.org/blog/2020/01/09/way-cooler-post-mortem.html
hence, remove the package and the module.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
docs/release-notes: remove way-cooler
way-cooler: show warnings about removal
Apply suggestions from code review
Co-Authored-By: worldofpeace <worldofpeace@protonmail.ch>
way-cooler: add suggestion by @Infinisil
The standard attrsOf is strict in its *values*, meaning it's impossible to
access only one attribute value without evaluating all others as well.
lazyAttrsOf is a version that doesn't have that problem, at the expense
of conditional definitions not properly working anymore.
This reverts commit eec83d41e3.
This broke hydra evaluation because with this commit submodule values
are allowed to be paths, however the certmgr module uses `either
(submodule ...) path` in its type, meaning it already used paths for
something else which would now be interpreted as a submodule.
When installing a fresh NixOS system it occasionally happens that you
encounter issues that are rather hard to track down since
`nixos-install(8)` doesn't provide any debugging flags.
This patch adds `-L` to force `nix build` to display the build-log on
stderr and `-v` to increase the log-level of Nix.
While it's a good idea to automate the linting of the python code used
for our tests, I think that it can be quite distracting when hacking on
a NixOS test.
I figured that it might be more convenient to add an option as a
shortcut for this to avoid that everyone needs to dig into the test
driver again.
Deperecates the interfaces option which was used to generate a host:port
list whereas the port was always hardcoded to 53. This unifies the
listen configuration for plain and TLS sockets and allows to specify a
port without an address for wildcard binds.
This makes ~2.5x speed up of an empty container instantiate, hence reduces
rebuild time of system with many declarative containers.
Note that this doesn't affect production systems much, becaseu those most
likely already include `minimal.nix` profile.
The upstream session files display managers use have no concept of sessions being composed from
desktop manager and window manager. To be able to set upstream session files as default
session, we need a single option. Having two different ways to set default session would be confusing,
though, so we decided to deprecate the old method.
We also created separate script for each session, just like we already had a separate desktop
file for each one, and started using displayManager.sessionPackages mechanism to make the
session handling more uniform.
Fixes https://github.com/NixOS/nixpkgs/issues/75075.
To summarize the report in the aforementioned issue, at a glance,
it's a different default than what upstream polkit has. Apparently
for 8+ years polkit defaults admin identities as members of
the wheel group [0]. This assumption would be appropriate on NixOS, where
every member of group 'wheel' is necessarily privileged.
[0]: 763faf434b
This cuts down the dependency tree on some rust builds where a crate not
just exposes a binary but also a library. `$out/lib` contained a bunch
of extra support files that among other information carry linker flags
(including the full path to link-time dependencies). Worst case this led
to some binary outputs depending on the full build closure of rust
crates.
Moving all the `$out/lib` files to `$lib/lib` solves this nicely.
`lib` might be a bit weird here as they are most of the time just rlib
files (rust libraries). Those are essential only required during
compilation but they can also be shared objects (like with traditional
C-style packages). Which is why I went with `lib` for the new output.
One of the caveats we are running into here is that we do not (always)
know ahead of time of a crate produces just a library or just a binary.
Cargo allows for some ambiguity regarding whether or not a crate
provides one, two, … binaries and libraries as it's outputs. Ideally we
would be able to rely on the `crateType` entirely but so far that isn't
the case. More work on that area might show how difficult that actually
is.
This is a more sane default since we do not magically (without opt-in)
pull in binaries from `~/bin`. That is not really an expected behavior
for many users. Users that still want that behavior can now just flip
that switch.
osquery was marked as broken since April.
If somebody steps up to fix it, we can always revive it from the
histroy, but there's not much value in shipping completely broken things
in current master.
cc @ma27
The package set is not maintained. It is also not used by most of the
BEAM community. Removing it to allow a more useful set of tools fit to
the BEAM community in Nixpkgs.
Add --use-remote-sudo option. When set, remote commands will be prefixed
with 'sudo'. This allows using sudo remotely _without_ having to use
sudo locally (when using --build-host/--taget-host).
Also add --all, which shows the value of all options. Diffing the --all
output on either side of contemplated changes is a lovely way to better
understand what's going on inside nixos.
Before, we very carefully unapplied and reapplied `set -u` so the rest
of Nixpkgs could continue to not fail on undefined variables. Let's rip
off the band-aid.
Just maching all network interfaces caused many breakages, see #18962
and #71106.
We already don't support the global networking.useDHCP,
networking.defaultGateway(6) options if networking.useNetworkd is
enabled, but direct users to configure the per-device
networking.interfaces.<name?>.… options.
Even though the release obviously already happened, I think it might
still make sense to add a short note about the attributes not being
supported any longer (and going forward).
(cherry picked from commit 7163d3a9df35904d0c9acc9f643fd70ee3108539)
(cherry picked from commit a64b8c3c191af1317cfdc1ea4f4e5f881c4cf503)
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented
Resolves#66650
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
Even a simple typo fix can result in a reflow of a whole paragraph, leading to illegible diffs. The majority of text editors supports wrapping the source code to a comfortable width so it makes sense to me to sacrifice the few that do not rather than the unfortunately line-oriented diff tools.
This plugin is fairly outdated and depends on python2 libraries that
don't receive any updates either (xmpppy for instance[1]).
[1] https://pypi.org/project/xmpppy/
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
It currently lacks an emoji font-family which means it has to be
disabled for them to function [0]. Additionally it's fallen out of
necessity to ship custom font rendering settings (as far as I'm aware
of).
[0]: https://github.com/NixOS/nixpkgs/pull/67215
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).
As described in the NixOps manual[1], dependencies to keys should be
defined like this now:
``` nix
{
systemd.services.myservice = {
after = [ "secret-key.service" ];
wants = [ "secret-key.service" ];
};
}
```
However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.
[1] https://nixos.org/nixops/manual/#idm140737322342384
systemd provides two sysctl snippets, 50-coredump.conf and
50-default.conf.
These enable:
- Loose reverse path filtering
- Source route filtering
- `fq_codel` as a packet scheduler (this helps to fight bufferbloat)
This also configures the kernel to pass coredumps to `systemd-coredump`.
These sysctl snippets can be found in `/etc/sysctl.d/50-*.conf`,
and overridden via `boot.kernel.sysctl`
(which will place the parameters in `/etc/sysctl.d/60-nixos.conf`.
Let's start using these, like other distros already do for quite some
time, and remove those duplicate `boot.kernel.sysctl` options we
previously did set.
In the case of rp_filter (which systemd would set to 2 (loose)), make
our overrides to "1" more explicit.
sysctl.d(5) recommends prefixing all filenames in /etc/sysctl.d with a
two-digit number and a dash, to simplify the ordering of the files.
Some packages provide custom files, often with "50-" prefix.
To ensure user-supplied configuration takes precedence over the one
specified via `boot.kernel.sysctl`, prefix the file generated there with
"60-".
There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
ibus-qt has not seen a release in 5 years and is only relevant for Qt
4.x, which is becoming more and more rare. Using my current laptop as a
data point, ibus-qt is the only dependency left that drags in qt-4.8.7.
