"platforms.gnu" has been linux-only since at least 17.03:
$ nix eval -f channel:nixos-17.03 lib.platforms.gnu
[ "i686-linux" "x86_64-linux" "armv5tel-linux" "armv6l-linux" "armv7l-linux" "aarch64-linux" "mips64el-linux" ]
Unlike platforms.linux, platforms.gnu indicates "must use glibc"
which for the most part is not intended.
Replacing platforms.gnu with platforms.linux would be the same "today"
but let's err on preserving existing behavior and be optimistic
about platforms these packages work on.
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/palemoon/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0/bin/palemoon -h’ got 0 exit code
- ran ‘/nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0/bin/palemoon --help’ got 0 exit code
- ran ‘/nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0/bin/palemoon -V’ and found version 27.9.0
- ran ‘/nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0/bin/palemoon -v’ and found version 27.9.0
- ran ‘/nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0/bin/palemoon --version’ and found version 27.9.0
- found 27.9.0 with grep in /nix/store/0qfxznyni5ivyrj3hs0w6dhlk3z4kfaq-palemoon-27.9.0
- directory tree listing: https://gist.github.com/d3039819d96bec3615450de44abbffc4
It was found that Quassel could be remotely crashed and had an
unauthenticated RCE vulnerability. The public annoucement can be found
on the oss-sec archive [1]. The bump to 0.12.5 is supposed fixe both issues.
[1] http://seclists.org/oss-sec/2018/q2/77
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Critical CVE-2018-6085: Use after free in Disk Cache. Reported by Ned Williamson on 2018-03-28
Critical CVE-2018-6086: Use after free in Disk Cache. Reported by Ned Williamson on 2018-03-30
High CVE-2018-6087: Use after free in WebAssembly. Reported by Anonymous on 2018-02-20
High CVE-2018-6088: Use after free in PDFium. Reported by Anonymous on 2018-03-15
High CVE-2018-6089: Same origin policy bypass in Service Worker. Reported by Rob Wu on 2018-02-04
High CVE-2018-6090: Heap buffer overflow in Skia. Reported by ZhanJia Song on 2018-03-12
High CVE-2018-6091: Incorrect handling of plug-ins by Service Worker. Reported by Jun Kokatsu (@shhnjk) on 2017-10-05
High CVE-2018-6092: Integer overflow in WebAssembly. Reported by Natalie Silvanovich of Google Project Zero on 2018-03-08
Medium CVE-2018-6093: Same origin bypass in Service Worker. Reported by Jun Kokatsu (@shhnjk) on 2017-11-01
Medium CVE-2018-6094: Exploit hardening regression in Oilpan. Reported by Chris Rohlf on 2016-08-01
Medium CVE-2018-6095: Lack of meaningful user interaction requirement before file upload. Reported by Abdulrahman Alqabandi (@qab) on 2016-08-11
Medium CVE-2018-6096: Fullscreen UI spoof. Reported by WenXu Wu of Tencent's Xuanwu Lab on 2017-10-19
Medium CVE-2018-6097: Fullscreen UI spoof. Reported by xisigr of Tencent's Xuanwu Lab on 2018-01-26
Medium CVE-2018-6098: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-01-03
Medium CVE-2018-6099: CORS bypass in ServiceWorker. Reported by Jun Kokatsu (@shhnjk) on 2018-02-03
Medium CVE-2018-6100: URL spoof in Omnibox. Reported by Lnyas Zhang on 2018-02-11
Medium CVE-2018-6101: Insufficient protection of remote debugging prototol in DevTools . Reported by Rob Wu on 2018-02-19
Medium CVE-2018-6102: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-02-20
Medium CVE-2018-6103: UI spoof in Permissions. Reported by Khalil Zhani on 2018-02-24
Medium CVE-2018-6104: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-03-08
Medium CVE-2018-6105: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-01-18
Medium CVE-2018-6106: Incorrect handling of promises in V8. Reported by lokihardt of Google Project Zero on 2018-01-25
Medium CVE-2018-6107: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-02-02
Medium CVE-2018-6108: URL spoof in Omnibox. Reported by Khalil Zhani on 2018-02-27
Low CVE-2018-6109: Incorrect handling of files by FileAPI. Reported by Dominik Weber (@DoWeb_) on 2017-04-10
Low CVE-2018-6110: Incorrect handling of plaintext files via file:// . Reported by Wenxiang Qian (aka blastxiang) on 2017-10-24
Low CVE-2018-6111: Heap-use-after-free in DevTools. Reported by Khalil Zhani on 2017-11-02
Low CVE-2018-6112: Incorrect URL handling in DevTools. Reported by Rob Wu on 2017-12-29
Low CVE-2018-6113: URL spoof in Navigation. Reported by Khalil Zhani on 2018-01-25
Low CVE-2018-6114: CSP bypass. Reported by Lnyas Zhang on 2018-02-13
Low CVE-2018-6115: SmartScreen bypass in downloads. Reported by James Feher on 2018-03-07
Low CVE-2018-6116: Incorrect low memory handling in WebAssembly. Reported by Jin from Chengdu Security Response Center of Qihoo 360 Technology Co. Ltd. on 2018-03-15
Low CVE-2018-6117: Confusing autofill settings. Reported by Spencer Dailey on 2018-03-15
Low CVE-2018-6084: Incorrect use of Distributed Objects in Google Software Updater on MacOS. Reported by Ian Beer of Google Project Zero on 2018-03-15
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/syncplay/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/dfjzzxr9ih0cpmz3ls5xcmfaf2qrhmhh-syncplay-1.5.3/bin/.syncplay-server-wrapped -h’ got 0 exit code
- ran ‘/nix/store/dfjzzxr9ih0cpmz3ls5xcmfaf2qrhmhh-syncplay-1.5.3/bin/.syncplay-server-wrapped --help’ got 0 exit code
- ran ‘/nix/store/dfjzzxr9ih0cpmz3ls5xcmfaf2qrhmhh-syncplay-1.5.3/bin/syncplay-server -h’ got 0 exit code
- ran ‘/nix/store/dfjzzxr9ih0cpmz3ls5xcmfaf2qrhmhh-syncplay-1.5.3/bin/syncplay-server --help’ got 0 exit code
- found 1.5.3 with grep in /nix/store/dfjzzxr9ih0cpmz3ls5xcmfaf2qrhmhh-syncplay-1.5.3
- directory tree listing: https://gist.github.com/52097c8cbb187c4fb391af784f94d056
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 0.9.96 with grep in /nix/store/hy3dyckwbq8x0ylgydqf3hsd0yyj38mf-otter-browser-0.9.96
- directory tree listing: https://gist.github.com/3ba5ac755cab96acd876703e94dff4b4
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/notmuch/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/05v4k89ni4phwyxvqskr0hji49b5fmck-notmuch-0.26.1/bin/notmuch --help’ got 0 exit code
- ran ‘/nix/store/05v4k89ni4phwyxvqskr0hji49b5fmck-notmuch-0.26.1/bin/notmuch help’ got 0 exit code
- ran ‘/nix/store/05v4k89ni4phwyxvqskr0hji49b5fmck-notmuch-0.26.1/bin/notmuch --version’ and found version 0.26.1
- found 0.26.1 with grep in /nix/store/05v4k89ni4phwyxvqskr0hji49b5fmck-notmuch-0.26.1
- directory tree listing: https://gist.github.com/adeae189f9ac416571a7c0e3beca712f
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/qutebrowser/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/qutebrowser -h` got 0 exit code
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/qutebrowser --help` got 0 exit code
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/..qutebrowser-wrapped-wrapped -h` got 0 exit code
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/..qutebrowser-wrapped-wrapped --help` got 0 exit code
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/.qutebrowser-wrapped -h` got 0 exit code
- ran `/nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1/bin/.qutebrowser-wrapped --help` got 0 exit code
- found 1.2.1 with grep in /nix/store/p9a5d6129dvx6gqbxn9fqgsmx7hnhwxb-qutebrowser-1.2.1
- directory tree listing: https://gist.github.com/b85ebb5c38a8861cac255f78b5c16525
* Fix reference CNI plugins
* The plugins were split out of the upstream cni repo around version
0.6.0
* Fix RBAC and DNS tests
* Fix broken apiVersion fields
* Change plugin linking to look in ${package}/bin rather than
${package.plugins}
* Initial work towards a working e2e test
* Test still fails, but at least the expression evaluates now
Continues @srhb's work in #37199Fixes#37199
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/newsboat/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat -h` got 0 exit code
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat --help` got 0 exit code
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat -V` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat -v` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat --version` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat -h` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/newsboat --help` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/podboat -h` got 0 exit code
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/podboat --help` got 0 exit code
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/podboat -h` and found version 2.11.1
- ran `/nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1/bin/podboat --help` and found version 2.11.1
- found 2.11.1 with grep in /nix/store/sijgq2a38x45ada8xzl69s7c6lsiar3c-newsboat-2.11.1
- directory tree listing: https://gist.github.com/b1dad1e84335a691d0ccf4aa357c12ad
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/telepathy-gabble/versions.
These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 0.18.4 with grep in /nix/store/pg936ixgiw96xqsrdzbwc1civylmy1q5-telepathy-gabble-0.18.4
- found 0.18.4 in filename of file in /nix/store/pg936ixgiw96xqsrdzbwc1civylmy1q5-telepathy-gabble-0.18.4
- directory tree listing: https://gist.github.com/92190024cdfe17a3e79730f988d904f6
This is for systems that are not using a full desktop environment, so
Gajim can fall back to the default icon theme of Gnome 3.
Among just fixing aesthetics this also fixes a few exceptions that were
triggered by Gajim not finding the icons. One example of this is when
you enter the plugins dialog, the window is empty if the icons can't be
found.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @abbradar, @Mic92, @7c6f434c
Just because the tests need GTK+, I think it's not a good idea to simply
disable them when we're still able to use an X virtual framebuffer to
run them anyway.
As with the package we had prior to version 1.0 I've disabled the
resolver test, because this one requires networking.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @abbradar, @Mic92, @7c6f434c
Uses the HTTPS url for cases where the existing URL has a permanent
redirect. For each domain, at least one fixed derivation URL was
downloaded to test the domain is properly serving downloads.
Also fixes jbake source URL, which was broken.
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/8dj6mrs62z7z7d42v0jwcwz7k46i927i-backintime-common-1.1.24/bin/backintime -h` got 0 exit code
- ran `/nix/store/8dj6mrs62z7z7d42v0jwcwz7k46i927i-backintime-common-1.1.24/bin/backintime --help` got 0 exit code
- ran `/nix/store/8dj6mrs62z7z7d42v0jwcwz7k46i927i-backintime-common-1.1.24/bin/backintime -v` and found version 1.1.24
- ran `/nix/store/8dj6mrs62z7z7d42v0jwcwz7k46i927i-backintime-common-1.1.24/bin/backintime --version` and found version 1.1.24
- found 1.1.24 with grep in /nix/store/8dj6mrs62z7z7d42v0jwcwz7k46i927i-backintime-common-1.1.24
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc -h` got 0 exit code
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc --help` got 0 exit code
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc -v` and found version 1.6.6
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc --version` and found version 1.6.6
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc -h` and found version 1.6.6
- ran `/nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6/bin/znc --help` and found version 1.6.6
- found 1.6.6 with grep in /nix/store/z51kkm0wj1wv4bxkib8lv7nqizdly9jw-znc-1.6.6
The icons for Firefox are in a new location in the unwrapped package; the
wrapper is updated to reflect that. This should have no effect on other browers
that provide their own icons in the default XDG location.
Also change to use jbuilder for build per upstream instructions. In this case, the build needs to be
driven by jbuilder but opam still needs to be in PATH.
* Update to the latest release version
* Use deps.nix from upstream repository to ensure nixpkgs-built
kontemplate is functionally equivalent to upstream releases
* extend meta attributes with long-form description
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 1.23.2 with grep in /nix/store/r7pl30mgdnrdig95aq6qy3d4dbvy8vji-pidgin-sipe-1.23.2
- directory tree listing: https://gist.github.com/c400423782c0ab85deea92ca910a179b
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter -h` got 0 exit code
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter --help` got 0 exit code
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter -V` and found version 2.6.11
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter --version` and found version 2.6.11
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter -h` and found version 2.6.11
- ran `/nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11/bin/imapfilter --help` and found version 2.6.11
- found 2.6.11 with grep in /nix/store/vfixsp2napk2fv4dkhzdfv0nx473vz1j-imapfilter-2.6.11
- directory tree listing: https://gist.github.com/3899407e9730a32a5b25ade7c1238086
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstat --help` got 0 exit code
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstat -v` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstat --version` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstat --help` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstati --help` got 0 exit code
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstati -v` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstati --version` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstati --help` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstatd --help` got 0 exit code
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstatd -v` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstatd --version` and found version 1.18
- ran `/nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18/bin/vnstatd --help` and found version 1.18
- found 1.18 with grep in /nix/store/zaidqa5gzm2wdfg0mrybj180k73jbkpq-vnstat-1.18
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 6.1.6 with grep in /nix/store/304wh7gzixm9as2wa2b619jcimn0837k-seafile-client-6.1.6
- found 6.1.6 in filename of file in /nix/store/304wh7gzixm9as2wa2b619jcimn0837k-seafile-client-6.1.6
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/liferea -h` got 0 exit code
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/liferea --help` got 0 exit code
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/liferea -v` and found version 1.12.2
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/liferea --version` and found version 1.12.2
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/.liferea-wrapped -h` got 0 exit code
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/.liferea-wrapped --help` got 0 exit code
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/.liferea-wrapped -v` and found version 1.12.2
- ran `/nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2/bin/.liferea-wrapped --version` and found version 1.12.2
- found 1.12.2 with grep in /nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2
- found 1.12.2 in filename of file in /nix/store/wjf8q5k0hh2vcjw65v2skcn54pq3vb0q-liferea-1.12.2
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 1.0.3 with grep in /nix/store/5n2jwjv8x9a1sic8ia32vncq5i5smd0f-inboxer-1.0.3
- found 1.0.3 in filename of file in /nix/store/5n2jwjv8x9a1sic8ia32vncq5i5smd0f-inboxer-1.0.3
This is necessary because the standard library which is distributed with
lumail (the lumail core configuration so to speak) is written for lua5.1
apparently.
The website states 5.1 or 5.2 or 5.3, but 5.2 fails because "loadstring"
was deprecated in lua 5.2.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Includes:
* Package gets a flag to use the debug build
* install phase installs all lua scripts from the package and makes
lumail find them
* global configuration which is shipped with the package can be
overridden, if desired
* parallel building enabled
Those version specs only exist to keep compat with python 3.3 which we
are not using anyway.
(cherry picked from commit 560b2bce6ce84628f97e242a3015201378a90eef)
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk -h` got 0 exit code
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk --help` got 0 exit code
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk help` got 0 exit code
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk -v` and found version 3.7.7
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk --version` and found version 3.7.7
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk version` and found version 3.7.7
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk -h` and found version 3.7.7
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk --help` and found version 3.7.7
- ran `/nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7/bin/taktuk help` and found version 3.7.7
- found 3.7.7 with grep in /nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7
- found 3.7.7 in filename of file in /nix/store/l4zd353icm418x6asy4123a3gcpy14cr-taktuk-3.7.7
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-wrapped -h` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-wrapped --help` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-wrapped -v` and found version 1.5.2
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-wrapped --version` and found version 1.5.2
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay -h` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay --help` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay -v` and found version 1.5.2
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay --version` and found version 1.5.2
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-server-wrapped -h` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/.syncplay-server-wrapped --help` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay-server -h` got 0 exit code
- ran `/nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2/bin/syncplay-server --help` got 0 exit code
- found 1.5.2 with grep in /nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2
- found 1.5.2 in filename of file in /nix/store/s02mpddajsz1q5h5r8mvmyd31np2ha26-syncplay-1.5.2
This is optional (`libcardiacarrest` has a workaround for this bug
because there's `firefox-bin` that I can't fix), but with this applied things
are a bit smoother.
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/vfr6b50xzj4rj0xhl83vfqqq127lx79s-pig-0.16.0/bin/pig --help` got 0 exit code
- ran `/nix/store/vfr6b50xzj4rj0xhl83vfqqq127lx79s-pig-0.16.0/bin/pig --version` and found version 0.16.0
- ran `/nix/store/vfr6b50xzj4rj0xhl83vfqqq127lx79s-pig-0.16.0/bin/pig -h` and found version 0.16.0
- found 0.16.0 with grep in /nix/store/vfr6b50xzj4rj0xhl83vfqqq127lx79s-pig-0.16.0
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 27.8.0 with grep in /nix/store/vqardwl9d7s3wdgapj4ybzrgpw5w3671-palemoon-27.8.0
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 0.6.0 with grep in /nix/store/20rzgnqnxfx21j49wr48pd4p9wb0ai5z-cni-0.6.0
- found 0.6.0 in filename of file in /nix/store/20rzgnqnxfx21j49wr48pd4p9wb0ai5z-cni-0.6.0
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 0.5.8 with grep in /nix/store/v1xv4aj5wq1mw5mdml2hwh4qd5bfdcim-baresip-0.5.8
- found 0.5.8 in filename of file in /nix/store/v1xv4aj5wq1mw5mdml2hwh4qd5bfdcim-baresip-0.5.8
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/651sa1wikygbqqvimg3a609n37isc78w-tcpkali-1.1.1/bin/tcpkali --version` and found version 1.1.1
- found 1.1.1 with grep in /nix/store/651sa1wikygbqqvimg3a609n37isc78w-tcpkali-1.1.1
- found 1.1.1 in filename of file in /nix/store/651sa1wikygbqqvimg3a609n37isc78w-tcpkali-1.1.1
cc "@ethercrow"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua -h` got 0 exit code
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua --help` got 0 exit code
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua help` got 0 exit code
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua -V` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua -v` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua --version` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua version` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua -h` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua --help` and found version 2.7.2
- ran `/nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2/bin/pjsua help` and found version 2.7.2
- found 2.7.2 with grep in /nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2
- found 2.7.2 in filename of file in /nix/store/3wqj8kyahgi1r25wp8vfhhsg0m1mzpkx-pjsip-2.7.2
cc "@viric @olynch"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1/bin/snort -V` and found version 2.9.11.1
- ran `/nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1/bin/snort --version` and found version 2.9.11.1
- ran `/nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1/bin/u2spewfoo help` got 0 exit code
- ran `/nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1/bin/.snort-wrapped -V` and found version 2.9.11.1
- ran `/nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1/bin/.snort-wrapped --version` and found version 2.9.11.1
- found 2.9.11.1 with grep in /nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1
- found 2.9.11.1 in filename of file in /nix/store/qan26dfxzzbh27cd91hcvad69ls7xnhw-snort-2.9.11.1
cc "@aycanirican"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 6.1.5 with grep in /nix/store/7y211zn1irykpjfgf8n38vbhh57xgaq2-seafile-client-6.1.5
- found 6.1.5 in filename of file in /nix/store/7y211zn1irykpjfgf8n38vbhh57xgaq2-seafile-client-6.1.5
cc "@calrama"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 1.2.235 with grep in /nix/store/9z3lbwjmcvgxpicxnkqsqyn2bmkyqvsw-psi-plus-1.2.235
cc "@orivej"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 0.8 with grep in /nix/store/di49z3ic9sk7mrg6rhf0c67qk8pda3kg-pidgin-xmpp-receipts-0.8
- found 0.8 in filename of file in /nix/store/di49z3ic9sk7mrg6rhf0c67qk8pda3kg-pidgin-xmpp-receipts-0.8
cc "@orivej"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 0.9 with grep in /nix/store/k19kx1lh4211srqcgnrwq7yfkvqclf9m-ostinato-0.9
- found 0.9 in filename of file in /nix/store/k19kx1lh4211srqcgnrwq7yfkvqclf9m-ostinato-0.9
cc "@rick68"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin/bin/nomad -h` got 0 exit code
- ran `/nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin/bin/nomad --help` got 0 exit code
- ran `/nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin/bin/nomad -v` and found version 0.7.1
- ran `/nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin/bin/nomad --version` and found version 0.7.1
- ran `/nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin/bin/nomad version` and found version 0.7.1
- found 0.7.1 with grep in /nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin
- found 0.7.1 in filename of file in /nix/store/glm49diswdg3qi1vxpffqmdrzmkykvqj-nomad-0.7.1-bin
cc "@rushmorem @pradeepchhetri @ehmry @lethalman"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/3f76mczmag2wnkww6la0hcdnf82jly92-lsyncd-2.2.2/bin/lsyncd --version` and found version 2.2.2
- found 2.2.2 with grep in /nix/store/3f76mczmag2wnkww6la0hcdnf82jly92-lsyncd-2.2.2
- found 2.2.2 in filename of file in /nix/store/3f76mczmag2wnkww6la0hcdnf82jly92-lsyncd-2.2.2
cc "@bobvanderlinden"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin/bin/kops -h` got 0 exit code
- ran `/nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin/bin/kops --help` got 0 exit code
- ran `/nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin/bin/kops help` got 0 exit code
- ran `/nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin/bin/kops version` and found version 1.8.1
- found 1.8.1 with grep in /nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin
- found 1.8.1 in filename of file in /nix/store/hclwimgs404fz9k2lrx35xcxa16bgb9x-kops-1.8.1-bin
cc "@offline @zimbatm @ehmry @lethalman"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin/bin/kompose -h` got 0 exit code
- ran `/nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin/bin/kompose --help` got 0 exit code
- ran `/nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin/bin/kompose help` got 0 exit code
- ran `/nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin/bin/kompose version` and found version 1.9.0
- found 1.9.0 with grep in /nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin
- found 1.9.0 in filename of file in /nix/store/lbk05ajkfj5za1zgz0haz57sfipiv38y-kompose-1.9.0-bin
cc "@thpham @ehmry @lethalman"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 1.0.2 with grep in /nix/store/r58bhh86hprpzb4fh5xk0snaqgbqa8vy-inboxer-1.0.2
- found 1.0.2 in filename of file in /nix/store/r58bhh86hprpzb4fh5xk0snaqgbqa8vy-inboxer-1.0.2
cc "@mgttlinger"
Semi-automatic update. These checks were performed:
- built on NixOS
- found 1.8 with grep in /nix/store/4ml6hcsv9k8gshqc461w2vvfpq3j9lh4-ii-1.8
- found 1.8 in filename of file in /nix/store/4ml6hcsv9k8gshqc461w2vvfpq3j9lh4-ii-1.8
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/k309zjlgh7pn9h1gpzf5rrmnxzmfifil-daq-2.2.2/bin/daq-modules-config -h` got 0 exit code
- ran `/nix/store/k309zjlgh7pn9h1gpzf5rrmnxzmfifil-daq-2.2.2/bin/daq-modules-config --help` got 0 exit code
- ran `/nix/store/k309zjlgh7pn9h1gpzf5rrmnxzmfifil-daq-2.2.2/bin/daq-modules-config help` got 0 exit code
- found 2.2.2 with grep in /nix/store/k309zjlgh7pn9h1gpzf5rrmnxzmfifil-daq-2.2.2
- found 2.2.2 in filename of file in /nix/store/k309zjlgh7pn9h1gpzf5rrmnxzmfifil-daq-2.2.2
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/bro-config --version` and found version 2.5.3
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/binpac -V` and found version 2.5.3
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/binpac -v` and found version 2.5.3
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/binpac --version` and found version 2.5.3
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/bro -v` and found version 2.5.3
- ran `/nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3/bin/bro --version` and found version 2.5.3
- found 2.5.3 with grep in /nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3
- found 2.5.3 in filename of file in /nix/store/l58hq30xhskjp4cvqpjjdxzjqi9q21wi-bro-2.5.3
Missing quotes of $UNAME_CMD in the firehol bash script
result in an error if the path to uname contains a dash,
as in /nix/store/...-coreutils-.../bin/uname.
Might be considered an upstream bug but only appears
in this special case, unlikely to occur in other distros.
