(originally from f9415cb621)
feh is used to set background image for desktop managers that do not
support it directly, however there is no need to include it in PATH.
Fixes#17450.
Users were confused that the error message said config.networking.hostId, and indeed that did nothing to fix their problem.
Update the error message to specify the option they should actually set.
Now there are separate `xfce4.xfce4mixer_pulse` and `xfce4.xfcevolumed_pulse` attributes for PulseAudio versions of these packages, instead of relying on Nixpkgs option. Mind that xfce4-volumed and xfce4-volumed-pulse are actually two separate programs without much overlap.
Without this, when you've enabled networkmanager and start a
nixos-container the container will briefly have its specified IP
address but then networkmanager starts managing it causing the IP
address to be dropped.
* Add options:
- enable
- davUser (default: "davfs2")
- davGroup (default: "davfs2)
* Add davfs2 user or group if they are not specified in the
configuration
As described in detail here: https://github.com/NixOS/nixpkgs/issues/32533
bash will load completion scripts in $p/share/bash-completion/completions/ on
startup instead of letting bash-completion do it's lazy loading. Bash startup
will then slow down (very noticeable when bash-completion is installed in a
profile).
This commit leaves loading of scripts in the hands of bash-completion,
improving startup time for everyone using `enableCompletion`.
fixes#32533
In commit ec9dc73 restarting NetworkManager after resume from
suspend/hibernate was introduced.
When I initially switch to NixOS I started noticing a high delay between
wakeup and re-connecting to WiFi & wired networks. The delay increased
from a few seconds (on my previous distro, same software stack) to
almost half a minute with NixOS.
I (locally) applied the change in this commit a few weeks ago and tested
since then. The notebook/mobile device experience has improved a lot.
Reconnects are as before switching to NixOS.
Issue #24401 could be related to this. Since I am not using KDE/plasma5
I can only guess…
This is required on the ThunderX CPUs on the Packet.net Type-2A
machines that have a GICv3. For some reason the default is to create a
GICv2 independent of the host hardware...
These packages will be placed into an environment using
`backendsToPackages`. This function explicitly maps backends to
`pkgs.nodePackages.${type}` unless it's a builtin. This ensures that only
valid backends that work on NixOS are used (if not, the build already
breaks at evaluation time).
The log will be redirected to `stdout` to be able to watch the entire
output using `journalctl`.
Configuration parameters for the backends need to be set using
`services.statsd.extraConfig` as each backend has its own options and
all of them shouldn't be validated and checked explicitly and manually.
Tunnel configuration has no member named "host" - i2pd does but it's called "address" in the options. As a result, no tunnel configuration is generated.
* Fix attribute check in inTunnels
* Fix integer to string coercion in inTunnels
* Add destinationPort option for outTunnels
Added the boolean option:
networking.networkmanager.enableStrongSwan
which enables the networkmanager_strongswan plugin and adds
strongswanNM to the dbus packages.
This was contributed by @wucke13, @eqyiel and @globin.
Fixes: #29873
There are security fixes in multiple packages /cc #32117,
so I'm merging a little earlier, with a few thousand jobs
still not finished on Hydra for x86_64-darwin and aarch64-linux.
- /var/run -> /run as the former is deprecated
- configure openal to use pulseaudio if pulseaudio is enabled
- configure libao to use pulseaudio if pulseaudio is enabled
For some reason, the GNOME 3.26 update broke the overrides. It turns
out the overrides now need to come before the overridden schemas in the
XDG_DATA_DIRS variable. This is not possible in general due to applications
prefixing the variable (e.g. in wrapGAppsHook).
To fix this, a new environment variable NIX_GSETTINGS_OVERRIDES_DIR
was introduced. It has greater priority than XDG_DATA_DIRS but lower
than GSETTINGS_SCHEMA_DIR. A separate variable was chosen in order not
to block the built-in one for users.
With libinput used for keyboard, base rules produce incorrect keyboard
layouts. We are removing the option as recommended in the XKB configuration
guide [1] to let X server choose the ruleset. It looks like it chooses
evdev rules which seem to work for some reason
[1]: https://www.x.org/releases/X11R7.6/doc/xorg-docs/input/XKB-Config.html#id2521360
The munin-node service used wrapProgram to inject environment variables.
This doesn't work because munin plugins depend on argv[0], which is
overwritten when the executable is a script with a shebang line (example
below).
This commit removes the wrappers and instead passes the required
environment variables to munin-node.
Eliminating the wrappers resulted in some broken plugins, e.g., meminfo
and hddtemp_smartctl. That was fixed with the per-plugin configuration.
Example:
The plugin if_eth0 is a symlink to /.../plugins/if_, which uses $0
to determine that it should monitor traffic on the eth0 interface.
if_ is a wrapped program, and runs `exec -a "$0" .if_-wrapped`
.if_-wrapped has a "#!/nix/.../bash" line, which results in bash
changing $0, and as a result the plugin thinks my interface
is called "-wrapped".
The bash module currently sets the `/etc/inputrc` unconditionally,
which prevents easy user override. This commit lowers the priority of
the setting to "option default" level, which allows a user to override
the value using either
environment.etc."inputrc".text = …
or
environment.etc."inputrc".source = …
Fixes#28443
Fixed few invocations to `systemctl` to have an absolute path. Additionally add
LOCALE_ARCHIVE so that perl stops spewing warning messages.
Looking at upstream git repo (git://github.com/Yubico/pam-u2f.git) the
docs initially said the path was ~/.yubico/u2f_keys, but it was later
changed to ~/.config/Yubico/u2f_keys (in 2015).
I have run pam_u2f.so with "debug" option and observed that the correct
path indeed is ~/.config/Yubico/u2f_keys.
* nghttpx: Add a new NixOS module for the nghttpx proxy server
This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.
* nixos/nghttpx: fix building manual
For some reason, the GNOME 3.26 update broke the overrides. It turns
out the overrides now need to come before the overriden schemas in the
XDG_DATA_DIRS variable. This is not possible in general due to applications
prefixing the variable (e.g. in wrapGAppsHook).
To fix this, a new environment variable NIX_GSETTINGS_OVERRIDES_DIR
was introduced. It has greater priority than XDG_DATA_DIRS but lower
than GSETTINGS_SCHEMA_DIR. A separate variable was chosen in order not
to block the built-in one for users.
Comparing packages via equality will lead to different results when package and module are from different
`nixpkgs` checkouts.
Also, because MariaDB is actually supported, added a note to option description to make this knowledge more discover-able.
`nixos-option` evals the description and the '`' is used to
define shell commands.
Due to this, the following error appears:
```
$ nixos-option services.postgresql.superUser
Value:
"root"
Default:
"root"
Description:
/run/current-system/sw/bin/nixos-option: line 294: root: command not found
/run/current-system/sw/bin/nixos-option: line 294: postgres: command not found
NixOS traditionally used as superuser, most other distros use .
From 17.09 we also try to follow this standard. Internal since changing this value
would lead to breakage while setting up databases.
```
In the previous version multiple default values would generate an
invalid babeld config file since all options would be concatenated
without any separator.
The error got introduced by 4f3d971ef5,
which removed the *Text attributes from the option.
This in turn leads to an evaluation error while building the
manual/manpage, because oraclejre8 is marked unfree.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @jbgi, @orivej, @globin
This is required by the new c5.* instance types.
Note that this changes disk names from /dev/xvd* to
/dev/nvme0n*. Amazon Linux has a udev rule that calls a Python script
named "ec2nvme-nsid" to create compatibility symlinks. We could use
that, but it would mean adding Python to the AMI closure...
Only the Oracle JRE is supported by Atlassian appsAtlassian apps
(see https://jira.atlassian.com/browse/JRASERVER-46152)
Plus Atlassian apps are non free so the switch logic always chose
Oracle JRE anyway.
Option is kept in case someone want to patch apps to support openjdk.
I don't know where this comes from (I accidentally did that as well
once), but some derivations seem to use `buildPhases` rather than
`phases` in their derivations.
This kills all improper usages as the lack of a `phases` argument
didn't break the build, so this can be safely removed.
This reverts commit 93c54acf97.
This reopens#30517 @nbp @Ma27
Breaking people's config for this is hardly reasonable as is. If it
absolutely cannot be avoided, at the very least, we need to provide
clear instructions on what people need to upgrade in their config. I
actually had to bisect to the commit, to even find out what property I
should change or define, as the error message was useless. It didn't
even mention a property name.
Discussion on the PR seems to be ongoing, so I'm reverting this, so we
don't break people's systems on unstable.
