* The module now has systemd config
* Add resolveLocalQueries option which sets up it as a dns server for
local host (including reasonable setup of resolvconf)
* Add "dnsmasq" user for running daemon
* Enabled dbus and dnssec support for the package
Conflicts:
nixos/modules/misc/ids.nix
Should bring most of the examples into a better consistency regarding
syntactic representation in the manual.
Thanks to @devhell for reporting.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
With mutableUsers = true, we now ensure that all users and groups that
were created declaratively, are updated or removed
appropriately. Thus, adding a user to users.extraUsers and then
removing it now causes the acoount to be removed from
/etc/passwd. Thus user/group management is fully congruent except that
users and groups that were created imperatively (via useradd/groupadd)
are not touched. We distinguish between declarative and imperative
users/groups by tracking the former in
/var/lib/nixos/declarative-{groups,users}.
With mutableUsers = false, you are now no longer required to specify
UIDs/GIDs for all users. The handling of mutableUsers = true/false is
the same code path; the only difference is that the "false" mode
ignores the existing contents of /etc/{passwd,group}.
The attribute ‘createUser’ is gone. It doesn't really make sense to
specify users that shouldn't be created.
This allows you to use the Linux kernel's built-in compressed memory as
swap space functionality.
It is recommended to enable only for kernel 3.14 (which is when zram came out of
the staging drivers area) or higher.
This has some advantages:
* You get ssh-agent regardless of how you logged in. Previously it was
only started for X11 sessions.
* All sessions of a user share the same agent. So if you added a key
on tty1, it will also be available on tty2.
* Systemd will restart ssh-agent if it dies.
* $SSH_AUTH_SOCK now points to the /run/user/<uid> directory, which is
more secure than /tmp.
For bonus points, we should patch ssh-agent to support socket-based
activation...
If you define a unit, and either systemd or a package in
systemd.packages already provides that unit, then we now generate a
file /etc/systemd/system/<unit>.d/overrides.conf. This makes it
possible to use upstream units, while allowing them to be customised
from the NixOS configuration. For instance, the module nix-daemon.nix
now uses the units provided by the Nix package. And all unit
definitions that duplicated upstream systemd units are finally gone.
This makes the baseUnit option unnecessary, so I've removed it.
Using pkgs.lib.mkOverride in a sysctl option would throw a bogus error.
Also, if you defined a sysctl multiple times in the same configuration,
only one of the values would be picked up, while the others were silently
discarded.
This patch should fix both issues. If you define a sysctl multiple
times at your highest defined priority level, you will get a proper
error with detailed location information.
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
This module implements a significant refactoring in grsecurity
configuration for NixOS, making it far more usable by default and much
easier to configure.
- New security.grsecurity NixOS attributes.
- All grsec kernels supported
- Allows default 'auto' grsec configuration, or custom config
- Supports custom kernel options through kernelExtraConfig
- Defaults to high-security - user must choose kernel, server/desktop
mode, and any virtualisation software. That's all.
- kptr_restrict is fixed under grsecurity (it's unwriteable)
- grsecurity patch creation is now significantly abstracted
- only need revision, version, and SHA1
- kernel version requirements are asserted for sanity
- built kernels can have the uname specify the exact grsec version
for development or bug reports. Off by default (requires
`security.grsecurity.config.verboseVersion = true;`)
- grsecurity sysctl support
- By default, disabled.
- For people who enable it, NixOS deploys a 'grsec-lock' systemd
service which runs at startup. You are expected to configure sysctl
through NixOS like you regularly would, which will occur before the
service is started. As a result, changing sysctl settings requires
a reboot.
- New default group: 'grsecurity'
- Root is a member by default
- GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID,
making it possible to easily add users to this group for /proc
access
- AppArmor is now automatically enabled where it wasn't before, despite
implying features.apparmor = true
The most trivial example of enabling grsecurity in your kernel is by
specifying:
security.grsecurity.enable = true;
security.grsecurity.testing = true; # testing 3.13 kernel
security.grsecurity.config.system = "desktop"; # or "server"
This specifies absolutely no virtualisation support. In general, you
probably at least want KVM host support, which is a little more work.
So:
security.grsecurity.enable = true;
security.grsecurity.stable = true; # enable stable 3.2 kernel
security.grsecurity.config = {
system = "server";
priority = "security";
virtualisationConfig = "host";
virtualisationSoftware = "kvm";
hardwareVirtualisation = true;
}
This module has primarily been tested on Hetzner EX40 & VQ7 servers
using NixOps.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
i18n.consoleKeyMap maps to KEYMAP=... in vconsole.conf and `loadkeymap'
in stage1. Both of these accept paths to a keymap file in addition to
a string containing the name of the keymap.
With this commit, it's possible to use your own keymap via:
i18n.consoleKeyMap = ./path/to/something.kmap
The mutableUsers feature uses `chpasswd` to set users passwords.
Passwords and their hashes were being piped into the program using
double quotes ("") to escape. This causes any `$` characters to be
expanded as shell variables. This is a serious problem because all the
password hash methods besides DES use multiple `$` in the hashes. Single
quotes ('') should be used instead to prevent shell variable expansion.
This is a rather large commit that switches user/group creation from using
useradd/groupadd on activation to just generating the contents of /etc/passwd
and /etc/group, and then on activation merging the generated files with the
files that exist in the system. This makes the user activation process much
cleaner, in my opinion.
The users.extraUsers.<user>.uid and users.extraGroups.<group>.gid must all be
properly defined (if <user>.createUser is true, which it is by default). My
pull request adds a lot of uids/gids to config.ids to solve this problem for
existing nixos services, but there might be configurations that break because
this change. However, this will be discovered during the build.
Option changes introduced by this commit:
* Remove the options <user>.isSystemUser and <user>.isAlias since
they don't make sense when generating /etc/passwd statically.
* Add <group>.members as a complement to <user>.extraGroups.
* Add <user>.passwordFile for setting a user's password from an encrypted
(shadow-style) file.
* Add users.mutableUsers which is true by default. This means you can keep
managing your users as previously, by using useradd/groupadd manually. This is
accomplished by merging the generated passwd/group file with the existing files
in /etc on system activation. The merging of the files is simplistic. It just
looks at the user/group names. If a user/group exists both on the system and
in the generated files, the system entry will be kept un-changed and the
generated entries will be ignored. The merging itself is performed with the
help of vipw/vigr to properly lock the account files during edit.
If mutableUsers is set to false, the generated passwd and group files will not
be merged with the system files on activation. Instead they will simply replace
the system files, and overwrite any changes done on the running system. The
same logic holds for user password, if the <user>.password or
<user>.passwordFile options are used. If mutableUsers is false, password will
simply be replaced on activation. If true, the initial user passwords will be
set according to the configuration, but existing passwords will not be touched.
I have tested this on a couple of different systems and it seems to work fine
so far. If you think this is a good idea, please test it. This way of adding
local users has been discussed in issue #103 (and this commit solves that
issue).
Now that Java is happy with our /etc/localtime, there is no reason to
set $TZ anymore. (See 945849b86f, 279248f6c5, 1b5e860f65607b4cc7de4b6b5db95460cf144526.)
Fixes#1463.
Some programs (notably the Java Runtime Environment) expect to be able
to extract the name of the time zone from the target of the
/etc/localtime symlink. That doesn't work if /etc/localtime is a
symlink to /etc/static/localtime. So make it a direct symlink.
(systemd service descriptions that is, not service descriptions in "man
configuration.nix".)
Capitalizing each word in the description seems to be the accepted
standard.
Also shorten these descriptions:
* "Munin node, the agent process" => "Munin Node"
* "Planet Venus, an awesome ‘river of news’ feed reader" => "Planet Venus Feed Reader"
A null password allows logging into local PAM services such as "login"
(agetty) and KDM. That's not actually a security problem for EC2
machines, since they do not have "local" logins; for VirtualBox
machines, if you local access, you can do anything anyway. But it's
better to be on the safe side and disable password-based logins for
root.
E.g.
The unique option `fileSystems./.device' is defined multiple times, in `/etc/nixos/configuration.nix' and `/etc/nixos/foo.nix'.
This requires passing file/value tuples to the merge functions.
For instance, if time.timeZone is defined multiple times, you now get
the error message:
error: user-thrown exception: The unique option `time.timeZone' is defined multiple times, in `/etc/nixos/configurations/misc/eelco/x11vnc.nix' and `/etc/nixos/configuration.nix'.
while previously you got:
error: user-thrown exception: Multiple definitions of string. Only one is allowed for this option.
and only an inspection of the stack trace gave a clue as to what
option caused the problem.
The major changes are:
* The evaluation is now driven by the declared options. In
particular, this fixes the long-standing problem with lack of
laziness of disabled option definitions. Thus, a configuration like
config = mkIf false {
environment.systemPackages = throw "bla";
};
will now evaluate without throwing an error. This also improves
performance since we're not evaluating unused option definitions.
* The implementation of properties is greatly simplified.
* There is a new type constructor "submodule" that replaces
"optionSet". Unlike "optionSet", "submodule" gets its option
declarations as an argument, making it more like "listOf" and other
type constructors. A typical use is:
foo = mkOption {
type = type.attrsOf (type.submodule (
{ config, ... }:
{ bar = mkOption { ... };
xyzzy = mkOption { ... };
}));
};
Existing uses of "optionSet" are automatically mapped to
"submodule".
* Modules are now checked for unsupported attributes: you get an error
if a module contains an attribute other than "config", "options" or
"imports".
* The new implementation is faster and uses much less memory.
