providers are already compiled independently so we don't need Hydra to
follow terraform_MAJ_MIN_full to have them all compiled.
Instead of having to create two aliases per release, add a "full"
passthru for that common use-case.
Eg:
terraform_0_11_full -> terraform_0_11.full
PHP5 will be EOLed by the end of the year: https://secure.php.net/supported-versions.php
In fact we don't support PHP5 anymore since 7e6b76fc6b.
The following packages had older versions packaged as well to retain
PHP5 support:
* APCu (4.0.11)
* Memcached (2.2.0), Memcache (3.0.8)
* XDebug (2.3.1)
* YAML (1.3.1)
* pthreads (2.0.10)
* redis (2.2.7)
The following packages were removed entirely due to missing support for
PHP7:
* spidermonkey
* zendopcache (part of PHP itself since 5.5)
* xcache
* geoip
Furthermore I declared `phpPackages.pthreads` as broken for now as it
supports PHP7, but the last release was 2016 and therefore PHP 7.0 is
supported, but the build fails with PHP 7.1 and PHP 7.2 (https://pecl.php.net/package/pthreads).
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in qmacfunctions.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in qmactoolbar.o
objc-class-ref in qmactoolbardelegate.o
ld: symbol(s) not found for architecture x86_64
FoundationDB uses Python at build time for some code generation.
However, it also has the official python bindings inside the source code
too, and the code for the Python bindings has some of it auto-generated
at compile time.
This made building python packages unattractive: we want to use the
source code generated from the FoundationDB build, but we don't want to
rebuild it. Previously we would override the 'python' input to the
FoundationDB module, but this meant we would do a complete rebuild, as
it was a necessary build time dependency, even though the resulting
generated code itself would not change. Furthermore, FoundationDB
versions < 6.0 don't properly support Python 3 *for the build system*,
though the bindings supported it, so that caused build failures. But the
first effect is the worst: it meant building separate python2 and
python3 packages implied two complete rebuilds of a single FoundationDB
version. This meant rather than 3 FDB builds, we'd do 3*N where N = the
number of major Python versions we support.
Finally, because we did not use pip to generate a wheel that we install
with metadata recorded for the installation, the FoundationDB python
package couldn't be used as an input to other setup.py-based packages:
there would be no recorded metadata in the dist-info folder which would
say this is the foundationdb package. This greatly limits its utility.
To fix all this, we do a few things:
- Apply some patches to fix the build system with Python 3.x for
older FoundationDB versions. (This is nice if end-users have
overridden the global Python version for some reason.)
- Move python directly into nativeBuildInputs, so it is only a
build time dependency.
- Take the python source code from the ./bindings directory and
tar it up use later after the build is done, so we get to keep
the generated code. This is the new 'pythonsrc' output from the
build. This code doesn't change based on whether or not the input
or resulting package is using Python 2 or 3, it's totally
deterministic.
- The build system also patches up the python source code a little,
so it can be installed directly with setup.py (it needs a little
stuff that it normally expects the build system to do.)
- Rework the python package to a separate file that uses
buildPythonPackage directly. Because the source code is already
prepared, it needs almost nothing else. Furthermore, this kills
the override itself for the foundationdb package, meaning rebuilds
are no longer needed.
- This package is very simple and just uses foundationdb.pythonsrc
as its source input. It also ensures a link to libfdb_c.so can
be found by ctypes (using substituteInPlace)
- python-packages.nix now just uses callPackage directly.
The net effect of this is, most importantly, that python packages do not
imply a full rebuild of the server source code: building python2 and
python3 packages from a version of FoundationDB now does not need to
override the foundationdb python input, reducing the number of needless
builds. They instead just run setup.py with the given version as input.
The second biggest effect is that wheel metadata is recorded correctly,
meaning dependent-python-packages that want to use the FoundationDB
bindings e.g. from PyPi should now work fine with buildPythonPackage.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
There’s nothing wrong with unstable packages when they are maintained
and frequently updated. However, when they become out-of-date, as many
do, it is usually best to just get rid of them as the stable version
is become newer than the unstable version. This removes any packages
called "unstable" that have not been updated in over 1 year. Affected
packages include:
- isyncUnstable
- sxhkd-unstable
- dosbox-unstable
Revert "treewide: remove unstable packages"
This reverts commit df01b0b37a04624cfe6f8d2ccb42b99289841b68.
The waf build system is python-based and hosted locally in each package in the executable file named "waf". Unlike CMake, it cannot generate makefiles so we end up having to override the configure, build, and install phases. I've tried to keep these as close to what's in setup.sh as possible. If there is no waf file in the root directory, then we just copy the one hosted in Nixpkgs. Otherwise the only thing you have to add to a package using Waf is "wafHook" into nativeBuildInputs. wafFlags controls the flags specifically passed to waf while configureFlags, buildFlags, and installFlags are still used as in the generic builder.
libreoffice-unwrapped points to the same libreoffice than libreoffice.
libreoffice-*-unwrapped exists for all versions
This bring an incompatible change where a user using
`libreoffice-unwrapped` hoping to use `fresh` would now be inadvertently
be using `still`.
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_cvWaitKey in window_cocoa.mm.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in window_cocoa.mm.o
objc-class-ref in cap_qtkit.mm.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in window_cocoa.mm.o
objc-class-ref in cap_qtkit.mm.o
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in window_cocoa.mm.o
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in cap_qtkit.mm.o
"_OBJC_CLASS_$_NSTimer", referenced from:
objc-class-ref in cap_qtkit.mm.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in _x002.o
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in _x002.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_uiMainStep in main.m.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in main.m.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in multilineentry.m.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in alloc.m.o
objc-class-ref in box.m.o
objc-class-ref in menu.m.o
objc-class-ref in radiobuttons.m.o
objc-class-ref in tab.m.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in _x002.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in _x002.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in _x002.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
__glfwPlatformPollEvents in cocoa_window.m.o
__glfwPlatformWaitEvents in cocoa_window.m.o
__glfwPlatformWaitEventsTimeout in cocoa_window.m.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in cocoa_window.m.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in cocoa_window.m.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
fl_open_display() in Fl_cocoa.o
fl_ready() in Fl_cocoa.o
fl_wait(double) in Fl_cocoa.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in Fl_cocoa.o
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in Fl_Sys_Menu_Bar.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in Fl_cocoa.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in Fl_cocoa.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in Fl_Native_File_Chooser_MAC.o
ld: symbol(s) not found for architecture x86_64
Also remove incorrect emacs25Macport alias.
Undefined symbols for architecture x86_64:
"_CFNotificationCenterAddObserver", referenced from:
_mac_term_init in macterm.o
_macfont_copy_available_families_cache in macfont.o
"_CFNotificationCenterGetDistributedCenter", referenced from:
_mac_term_init in macterm.o
"_CFNotificationCenterGetLocalCenter", referenced from:
_macfont_copy_available_families_cache in macfont.o
"_CFURLCopyResourcePropertyForKey", referenced from:
_Fmac_file_alias_p in mac.o
"_CFURLCreateBookmarkDataFromFile", referenced from:
_Fmac_file_alias_p in mac.o
"_CFURLCreateByResolvingBookmarkData", referenced from:
_Fmac_file_alias_p in mac.o
"_CFURLResourceIsReachable", referenced from:
_mac_update_title_bar in macfns.o
_mac_input_source_properties in macfns.o
"_NSDefaultRunLoopMode", referenced from:
-[NSApplication(Emacs) runTemporarilyWithBlock:] in macappkit.o
___57-[EmacsController handleQueuedNSEventsWithHoldingQuitIn:]_block_invoke in macappkit.o
_mac_run_loop_run_once in macappkit.o
___mac_run_loop_run_once_block_invoke in macappkit.o
___37-[EmacsController(Menu) trackMenuBar]_block_invoke in macappkit.o
___create_and_show_dialog_block_invoke.2445 in macappkit.o
___mac_select_block_invoke in macappkit.o
...
"_NSURLAttributeModificationDateKey", referenced from:
_mac_document_create_with_url in macappkit.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSData", referenced from:
l_OBJC_$_CATEGORY_NSData_$_Emacs in macappkit.o
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSMethodSignature", referenced from:
l_OBJC_$_CATEGORY_NSMethodSignature_$_Emacs in macappkit.o
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
l_OBJC_$_CATEGORY_NSMutableArray_$_Emacs in macappkit.o
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSMutableData", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSMutableSet", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSNull", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSSet", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSTimer", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in macappkit.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in macappkit.o
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table81 in macappkit.o
GCC_except_table810 in macappkit.o
"_kCFURLIsAliasFileKey", referenced from:
_Fmac_file_alias_p in mac.o
"_kCFURLIsSymbolicLinkKey", referenced from:
_Fmac_file_alias_p in mac.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_CFNotificationCenterAddObserver", referenced from:
_macfont_copy_available_families_cache in macfont.o
"_CFNotificationCenterGetLocalCenter", referenced from:
_macfont_copy_available_families_cache in macfont.o
"_NSDefaultRunLoopMode", referenced from:
_ns_send_appdefined in nsterm.o
-[EmacsApp run] in nsterm.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
objc-class-ref in nsselect.o
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in nsimage.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in macfont.o
"_OBJC_CLASS_$_NSLocale", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in nsmenu.o
objc-class-ref in nsselect.o
"_OBJC_CLASS_$_NSMutableSet", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSTimer", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsfns.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsfns.o
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table8 in nsterm.o
GCC_except_table1 in nsselect.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in trash-571f39.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in trash-571f39.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in trash-571f39.o
objc-class-ref in HGCLIUtils-31f3b3.o
ld: symbol(s) not found for architecture x86_64
note: Undefined symbols for architecture x86_64:
"_CFURLResourceIsReachable", referenced from:
alacritty::config::Monitor:🆕:_$u7b$$u7b$closure$u7d$$u7d$::h8c82fbfba8a3a673 in alacritty-6a8d3226ed5c4bef.alacritty.9tpyu7jw-cgu.1.rcgu.o
"_NSDefaultRunLoopMode", referenced from:
alacritty::main::hd6e46019b2208595 in alacritty-6a8d3226ed5c4bef.alacritty.9tpyu7jw-cgu.1.rcgu.o
ld: symbol(s) not found for architecture x86_64
clang-5.0: error: linker command failed with exit code 1 (use -v to see invocation)
* polar-bookshelf: init at 1.0.11
* Grab gsettings_desktop_schemas from gnome3
* Explain why we're not building from source
* Use autoPatchelfHook
* Updated license & further cleanup
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_X11ApplicationMain in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
objc-class-ref in libXquartz.a(X11Controller.o)
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
objc-class-ref in libXquartz.a(X11Controller.o)
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table29 in libxpbproxy.a(x-selection.o)
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_X11ApplicationMain in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
objc-class-ref in libXquartz.a(X11Controller.o)
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in libxpbproxy.a(x-selection.o)
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
objc-class-ref in libXquartz.a(X11Controller.o)
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in libXquartz.a(X11Application.o)
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table29 in libxpbproxy.a(x-selection.o)
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_CFNotificationCenterAddObserver", referenced from:
_main in main.o
"_CFNotificationCenterGetDistributedCenter", referenced from:
_main in main.o
"_OBJC_CLASS_$_NSTimer", referenced from:
objc-class-ref in main.o
objc-class-ref in x-screen.o
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table25 in main.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_CFNotificationCenterAddObserver", referenced from:
_macfont_copy_available_families_cache in macfont.o
"_CFNotificationCenterGetLocalCenter", referenced from:
_macfont_copy_available_families_cache in macfont.o
"_NSDefaultRunLoopMode", referenced from:
_ns_send_appdefined in nsterm.o
-[EmacsApp run] in nsterm.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
objc-class-ref in nsselect.o
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in nsimage.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in macfont.o
"_OBJC_CLASS_$_NSLocale", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in nsmenu.o
objc-class-ref in nsselect.o
"_OBJC_CLASS_$_NSMutableSet", referenced from:
objc-class-ref in nsterm.o
"_OBJC_CLASS_$_NSRunLoop", referenced from:
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSTimer", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsmenu.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsfns.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in nsterm.o
objc-class-ref in nsfns.o
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table8 in nsterm.o
GCC_except_table1 in nsselect.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in contacts.o
objc-class-ref in FormatHelper.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in FormatHelper.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in os_macosx.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in GPGDefaults.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in PinentryController.o
objc-class-ref in GPGDefaults.o
objc-class-ref in KeychainSupport.o
"_OBJC_CLASS_$_NSMutableDictionary", referenced from:
objc-class-ref in GPGDefaults.o
"_OBJC_CLASS_$_NSSet", referenced from:
objc-class-ref in GPGDefaults.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in GPGDefaults.o
ld: symbol(s) not found for architecture x86_64
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in nsfile.o
objc-class-ref in nsimage.o
ld: symbol(s) not found for architecture x86_64
This tool was initially built specifically for nixcloud to prevent a few
annoying programs from binding to IP sockets.
While initially only accepting a JSON file as input, the tool now has a
proper command line interface and it's also generally usable to turn IP
sockets of any program into Unix sockets.
Another thing that might be even useful for NixOS modules is the
possibility to bend programs into using systemd socket activation.
Signed-off-by: aszlig <aszlig@nix.build>
It's not included implicitly by the frameworks anymore.
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_QZ_PumpEvents in SDL_QuartzEvents.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in SDL_QuartzEvents.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in SDL_QuartzEvents.o
ld: symbol(s) not found for architecture x86_64
It's not included implicitly by the frameworks anymore.
Undefined symbols for architecture x86_64:
"_NSDefaultRunLoopMode", referenced from:
_Cocoa_PumpEvents in SDL_cocoaevents.o
"_NSURLIsAliasFileKey", referenced from:
-[SDLWindow performDragOperation:] in SDL_cocoawindow.o
"_OBJC_CLASS_$_NSArray", referenced from:
objc-class-ref in SDL_cocoaclipboard.o
objc-class-ref in SDL_cocoakeyboard.o
objc-class-ref in SDL_cocoawindow.o
"_OBJC_CLASS_$_NSData", referenced from:
objc-class-ref in SDL_cocoamouse.o
"_OBJC_CLASS_$_NSDate", referenced from:
objc-class-ref in SDL_cocoaevents.o
"_OBJC_CLASS_$_NSDictionary", referenced from:
objc-class-ref in SDL_cocoaevents.o
"_OBJC_CLASS_$_NSMutableArray", referenced from:
objc-class-ref in SDL_cocoawindow.o
"_OBJC_CLASS_$_NSURL", referenced from:
objc-class-ref in SDL_cocoawindow.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
objc-class-ref in SDL_cocoaevents.o
"_OBJC_EHTYPE_$_NSException", referenced from:
GCC_except_table67 in SDL_cocoawindow.o
ld: symbol(s) not found for architecture x86_64
Python 3.4 will receive it's final patch release in March 2019 and there won't
be any releases anymore after that, so also not during NixOS 2019.03.
Python 3.4 is not used anymore in Nixpkgs. In any case, migrating code from
3.4 to 3.4+ is trivial.
ee58a5b30d broke the plv8 build because it
upgraded the v8_6_x expression everywhere to the 6.9 branch, which came
with API changes. Notably, it seems plv8 only supports up-to v8 6.4.x at
this time.
This keeps a copy of the plv8_6_x expression inside the same directory
as the other v8 versions (so patches, etc are easy to apply), but it is
not exposed to the top-level of all-packages.nix.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
