addPassthru became unused in #33057, but its signature was changed at the same
time. This commit restores the original signature and updates the warning and
the changelog.
This was only applicable to very specific hardware, and the only person
with an apparent interest in maintaining it (me) no longer uses the
hardware in question.
before:
- /var/run/memcached is a bad default for a socket path, since its
parent directory must be writeable by memcached.
- Socket directory was not created by the module itself -> this was
left as a burden to the user?
- Having a static uid with a dynamic user name is not very useful.
after:
- Replace services.memcached.socket by a boolean flag. This simplifies
our code, since we do not have to check if the user specifies a
path with a parent directory that should be owned by memcached
(/run/memcached/memcached.sock -> /run/memcached).
- Remove fixed uid/gid allocation. The only file ever owned by the
daemon is the socket that will be recreated on every start.
Therefore user and group ids do not need to be static.
- only create the memcached user, if the user has not specified a
different one. The major use case for changing option is to allow
existing services (such as php-fpm) opening the local unix socket.
If we would unconditionally create a user that option would be
useless.
Since ssh-dss is no longer supported by default, users relying on those
keys for their login may be locked out. They should ideally use stronger
keys, but adding the support for ssh-dss back in can also be done
through extraConfig.
This reverts commit 93c54acf97.
This reopens#30517 @nbp @Ma27
Breaking people's config for this is hardly reasonable as is. If it
absolutely cannot be avoided, at the very least, we need to provide
clear instructions on what people need to upgrade in their config. I
actually had to bisect to the commit, to even find out what property I
should change or define, as the error message was useless. It didn't
even mention a property name.
Discussion on the PR seems to be ongoing, so I'm reverting this, so we
don't break people's systems on unstable.
postage is no longer maintained and has been replaced by the identical pgmanage. See:
https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage
The following error is raised when a user enables the deprecated `services.postage.enable` option:
Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
Also unifies the BIOS and UEFI installation instructions.
It's a fairly basic usage, but it makes explicity the fact that
you should at least have a main partition and a swap partition,
and will save some users a bit of internet searching while they
are getting set up.
This is a squash commit of the joint work from:
* Jan Tojnar (@jtojnar)
* Linus Heckemann (@lheckemann)
* Ryan Mulligan (@ryantm)
* romildo (@romildo)
* Tom Hunger (@teh)
This commit readds and updates the 1.x package from 1.1.4 to 1.1.6 which
also includes the needed command for migrating to 2.x
The module is adjusted to the version change, defaulting to radicale2 if
stateVersion >= 17.09 and radicale1 otherwise. It also now uses
ExecStart instead of the script service attribute. Some missing dots at
the end of sentences were also added.
I added a paragraph in the release notes on how to update to a newer
version.
* postgresql service: make 9.6 the default version for 17.09
* postgresql service: change default superuser for 17.09
Change the default superuser from `root` to `postgres` for state
version 17.09
* postgresql service: change default data directory for 17.09
The new directory includes the schema version of the database.
This makes upgrades easier and is more consistent with other distros.
* updated nixos release notes
When you have a setup consisting of multiple monitors, the default is
that the first monitor detected by xrandr is set to the primary monitor.
However this may not be the monitor you need to be set as primary. In
fact this monitor set to primary may in fact be disconnected.
This has happened for the original submitter of the pull request and it
affected these programs:
* XMonad: Gets confused with Super + {w,e,r}
* SDDM: Puts the login screen on the wrong monitor, and does not
currently duplicate the login screen on all monitors
* XMobar: Puts the XMobar on the wrong monitor, as it only puts the
taskbar on the primary monitor
These changes should fix that not only by setting a primary monitor in
xrandrHeads but also make it possible to make a different monitor the
primary one.
The changes are also backwards-compatible.
The xrandrHeads option has been there since a long time, so there is no
need to advertise it as a new feature.
Instead, let's focus on just what has changed, which is that we now
assign one head to be primary.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The inability to run strace or gdb is the kind of
developer-unfriendliness that we're used to from OS X, let's not do it
on NixOS.
This restriction can be re-enabled by setting
boot.kernel.sysctl."kernel.yama.ptrace_scope" = 1;
It might be nice to have a NixOS module for enabling hardened defaults.
Xref #14392.
Thanks @abbradar.
This is based on a prototype Nicolas B. Pierron worked on during a
discussion we had at FOSDEM.
A new version with a workaround for problems of the reverted original.
Discussion: https://github.com/NixOS/nixpkgs/commit/3f2566689
If a package's meta has `knownVulnerabilities`, like so:
stdenv.mkDerivation {
name = "foobar-1.2.3";
...
meta.knownVulnerabilities = [
"CVE-0000-00000: remote code execution"
"CVE-0000-00001: local privilege escalation"
];
}
and a user attempts to install the package, they will be greeted with
a warning indicating that maybe they don't want to install it:
error: Package ‘foobar-1.2.3’ in ‘...default.nix:20’ is marked as insecure, refusing to evaluate.
Known issues:
- CVE-0000-00000: remote code execution
- CVE-0000-00001: local privilege escalation
You can install it anyway by whitelisting this package, using the
following methods:
a) for `nixos-rebuild` you can add ‘foobar-1.2.3’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"foobar-1.2.3"
];
}
b) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘foobar-1.2.3’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"foobar-1.2.3"
];
}
Adding either of these configurations will permit this specific
version to be installed. A third option also exists:
NIXPKGS_ALLOW_INSECURE=1 nix-build ...
though I specifically avoided having a global file-based toggle to
disable this check. This way, users don't disable it once in order to
get a single package, and then don't realize future packages are
insecure.
From Postfix documentation:
With this setting, the Postfix SMTP server will not reject mail with "User
unknown in local recipient table". Don't do this on systems that receive mail
directly from the Internet. With today's worms and viruses, Postfix will become
a backscatter source: it accepts mail for non-existent recipients and then
tries to return that mail as "undeliverable" to the often forged sender
address.
This patch add a new argument to Nixpkgs default expression named "overlays".
By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`. If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory. If the home directory does not exists it will
fallback on an empty list of overlays.
The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages. The overlays, i-e directory, files, symbolic links
are used in alphabetical order.
The simplest overlay which extends Nixpkgs with nothing looks like:
```nix
self: super: {
}
```
More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.
An example of overlay which extends Nixpkgs with a small set of packages can be found at:
https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix
To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
Commits
351d12437 ("nixos/release-notes: PHP config-file-scan-dir /etc -> /etc/php.d")
41c8aa8d6 ("php: change config-file-scan-dir from /etc to /etc/php.d")
were merged to master _after_ NixOS 16.09. Commit 351d12437 then wrongly
updated the NixSO 16.09 release notes. Fix by moving the entry to NixOS
17.03.
`stripHash` documentation states that it prints out the stripped name to
the stdout, but the function stored the value in `strippedName`
instead.
Basically all usages did something like
`$(stripHash $foo | echo $strippedName)` which is just braindamaged.
Fixed the implementation and all invocations.
This introduces VirtualBox version 5.1.6 along with a few refactored
stuff, notably:
* Kernel modules and user space applications are now separate
derivations.
* If config.pulseaudio doesn't exist in nixpkgs config, the default is
now to build with PulseAudio modules.
* A new updater to keep VirtualBox up to date.
All subtests in nixos/tests/virtualbox.nix succeed on my machine and
VirtualBox was reported to be working by @DamienCassou (although with
unrelated audio problems for another fix/branch) and @calbrecht.
The change is backwards-compatible for users of the NixOS module but not
if people were using the package directly, so let's warn users about
that.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Before this commit updating /var/setuid-wrappers/ folder introduced
a small window where NixOS activation scripts could be terminated
and resulted into empty /var/setuid-wrappers/ folder.
That's very unfortunate because one might lose sudo binary.
Instead we use two atomic operations mv and ln (as described in
https://axialcorps.com/2013/07/03/atomically-replacing-files-and-directories/)
to achieve atomicity.
Since /var/setuid-wrappers is not a directory anymore, tmpfs mountpoints
were removed in installation scripts and in boot process.
Tested:
- upgrade /var/setuid-wrappers/ from folder to a symlink
- make sure /run/setuid-wrappers-dirs/ legacy symlink is really deleted
This removes our hardcoded presets which weren't updated for quite some time.
Infinality now has new hardcoded presets in freetype, which can be overriden if
desired with environment variables (as before). Accordingly, updated NixOS
module to set the hardcoded preset.
Additionally used a more "right" type for substitutions.
The name gitlab-runner clashes with a component of Gitlab CI with the
same name and only confuses people. It's now called gitlab-bundle and
a convenience-script gitlab-rake for easier invocation of rake tasks
was added. This was the primary use case of gitlab-runner.
When displaying a warning about a removed Option we should always
include reasoning why it was removed and how to get the same
functionality without it.
Introduces such a description argument and patches occurences (mostly
with an empty string).
startGnuPGAgent: further notes on replacement
Allow usage of list of strings instead of a comma-separated string
for filesystem options. Deprecate the comma-separated string style
with a warning message; convert this to a hard error after 16.09.
15.09 was just released, so this provides a deprecation period during
the 16.03 release.
closes#10518
Signed-off-by: Robin Gloster <mail@glob.in>
Since 74209a4 we have initial support for the "vboxsf" (VirtualBox
shared folder) file system support. This will be cherry-picked to
release-15.09 so we need to notice people about the change.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
There were quite a few configuration options which were tagged via
<literal/>, so in order to keep consistency with other docbook manuals
in the source tree, let's use <option/> here.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
