Commit Graph

765 Commits

Author SHA1 Message Date
Jörg Thalheim
f2e1e7f3cd Merge pull request #26503 from vdemeester/update-runc
Update runc to 1.0.0-rc3
2017-06-10 22:48:03 +01:00
Vincent Demeester
46b00e0b15
Update runc to 1.0.0-rc3
- Fix compilation problems
- Remove patches as those are included in the sources now

Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-06-10 18:05:57 +02:00
Graham Christensen
7d8218a351 Merge pull request #26489 from michalpalka/xen-security
xen: patch for XSAs: 206, 211, 212, 213, 214 and 215
2017-06-09 09:31:42 -04:00
Michał Pałka
dd3dcceb23 xen: patch for XSAs: 206, 211, 212, 213, 214 and 215
XSA-206 Issue Description:

> xenstored supports transactions, such that if writes which would
> invalidate assumptions of a transaction occur, the entire transaction
> fails.  Typical response on a failed transaction is to simply retry
> the transaction until it succeeds.
>
> Unprivileged domains may issue writes to xenstore which conflict with
> transactions either of the toolstack or of backends such as the driver
> domain. Depending on the exact timing, repeated writes may cause
> transactions made by these entities to fail indefinitely.

More: https://xenbits.xen.org/xsa/advisory-206.html

XSA-211 Issue Description:

> When a graphics update command gets passed to the VGA emulator, there
> are 3 possible modes that can be used to update the display:
>
> * blank - Clears the display
> * text - Treats the display as showing text
> * graph - Treats the display as showing graphics
>
> After the display geometry gets changed (i.e., after the CIRRUS VGA
> emulation has resized the display), the VGA emulator will resize the
> console during the next update command. However, when a blank mode is
> also selected during an update, this resize doesn't happen. The resize
> will be properly handled during the next time a non-blank mode is
> selected during an update.
>
> However, other console components - such as the VNC emulation - will
> operate as though this resize had happened. When the display is
> resized to be larger than before, this can result in a heap overflow
> as console components will expect the display buffer to be larger than
> it is currently allocated.

More: https://xenbits.xen.org/xsa/advisory-211.html

XSA-212 Issue Description:

> The XSA-29 fix introduced an insufficient check on XENMEM_exchange
> input, allowing the caller to drive hypervisor memory accesses outside
> of the guest provided input/output arrays.

More: https://xenbits.xen.org/xsa/advisory-212.html

XSA-213 Issue Description:

> 64-bit PV guests typically use separate (root) page tables for their
> kernel and user modes.  Hypercalls are accessible to guest kernel
> context only, which certain hypercall handlers make assumptions on.
> The IRET hypercall (replacing the identically name CPU instruction)
> is used by guest kernels to transfer control from kernel mode to user
> mode.  If such an IRET hypercall is placed in the middle of a multicall
> batch, subsequent operations invoked by the same multicall batch may
> wrongly assume the guest to still be in kernel mode.  If one or more of
> these subsequent operations involve operations on page tables, they may
> be using the wrong root page table, confusing internal accounting.  As
> a result the guest may gain writable access to some of its page tables.

More: https://xenbits.xen.org/xsa/advisory-213.html

XSA-214 Issue Description:

> The GNTTABOP_transfer operation allows one guest to transfer a page to
> another guest.  The internal processing of this, however, does not
> include zapping the previous type of the page being transferred.  This
> makes it possible for a PV guest to transfer a page previously used as
> part of a segment descriptor table to another guest while retaining the
> "contains segment descriptors" property.
>
> If the destination guest is a PV one of different bitness, it may gain
> access to segment descriptors it is not normally allowed to have, like
> 64-bit code segments in a 32-bit PV guest.
>
> If the destination guest is a HVM one, that guest may freely alter the
> page contents and then hand the page back to the same or another PV
> guest.
>
> In either case, if the destination PV guest then inserts that page into
> one of its own descriptor tables, the page still having the designated
> type results in validation of its contents being skipped.

More: https://xenbits.xen.org/xsa/advisory-214.html

XSA-215 Issue Description:

> Under certain special conditions Xen reports an exception resulting
> from returning to guest mode not via ordinary exception entry points,
> but via a so call failsafe callback.  This callback, unlike exception
> handlers, takes 4 extra arguments on the stack (the saved data
> selectors DS, ES, FS, and GS).  Prior to placing exception or failsafe
> callback frames on the guest kernel stack, Xen checks the linear
> address range to not overlap with hypervisor space.  The range spanned
> by that check was mistakenly not covering these extra 4 slots.

More: https://xenbits.xen.org/xsa/advisory-215.html
2017-06-09 13:09:01 +00:00
Vladimír Čunát
cc9a72a286
virtualboxGuestAdditions: don't install setuid/setgid 2017-06-09 13:09:21 +02:00
Michał Pałka
965668903a xen: fix pygrub by making sure it is wrapped
Recent commit #c10af9e744c91dff1ccc07a52a0b57d1e4d339f3 changed the
behaviour of wrapPythonPrograms, which caused pygrub to no longer
being wrapped. This commit fixes this.
2017-06-09 06:22:03 +00:00
midchildan
7060a692c5
virtmanager: Fix python import error 2017-06-05 23:42:25 +09:00
Robin Gloster
13f2f8673b
OVMF: fix build
$fd for the output was overwritten during the build
2017-05-29 12:21:17 +02:00
Tim Steinbach
9237459d60
rkt: 1.25.0 -> 1.26.0 2017-05-25 18:13:54 -04:00
Joachim Fasting
49ecd62c08
lkl: split outputs
Breaking out lib allows users to link against lkl without pulling the
kitchen sink into their closure.
2017-05-24 01:07:26 +02:00
Joachim Fasting
e0b623a56d
lkl: break description into longDescription and a briefer descr 2017-05-24 01:07:24 +02:00
Joachim Fasting
8c8f40a128
lkl: d747073 -> 2017-03-24
- Moves to a more recent kernel (4.10, I think ...)
- API break re the previous version
- cptofs: fix root directory copy
- add support for disks with custom ops
- add LKL_HIJACK_NET_QDISC to configure qdisc policy
- add LKL_HIJACK_SYSCTL to configure sysctl values
2017-05-24 01:07:23 +02:00
Joachim Fasting
e983d4306e
lkl: bc & python are native build inputs 2017-05-24 01:07:22 +02:00
Joachim Fasting
e845495edb
lkl: add meta.homepage 2017-05-24 01:07:14 +02:00
Peter Hoeg
5b45342832 virtmanager-qt: 0.43.70 -> 0.43.70.2 2017-05-23 17:54:20 +08:00
Joachim F
07ceaa2ec8 Merge pull request #25896 from joachifm/ovmf
ovmf: split firmware image files
2017-05-21 14:48:29 +01:00
Joachim Fasting
874b81b31f
treewide: s,enableParallelBuild(s),enableParallelBuilding,g 2017-05-20 17:16:17 +02:00
Joachim Fasting
252dcd62f3
OVMF: separate output for ovmf binaries
OVMF{,CODE,VARS}.fd are now available in a dedicated fd output, greatly
reducing the closure in the common case where only those files are used (a
few MBs versus several hundred MBs for the full OVMF).

Note: it's unclear why `dontPatchELF` is now necessary for the build to
pass (on my end, at any rate) but it doesn't make much sense to run this
fixup anyway,

Note: my reading of xen's INSTALL suggests that --with-system-ovmf should
point directly to the OVMF binary.  As such, the previous invocation was
incorrect (it pointed to the root of the OVMF tree).  In any case, I have
only built xen with `--with-system-ovmf`, I have not tested it.

Fixes https://github.com/NixOS/nixpkgs/issues/25854
Closes https://github.com/NixOS/nixpkgs/pull/25855
2017-05-20 12:33:48 +02:00
Jörg Thalheim
618f9aa52c
docker-proxy: remove go references
related to #25861
2017-05-17 22:14:34 +01:00
Peter Hoeg
68f335c6cd virtmanager-qt: 0.42.67 -> 0.43.70 2017-05-14 11:21:51 +08:00
Vincent Demeester
398f6ed7d3
docker-edge: 17.04 to 17.05
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-05-09 10:11:05 +02:00
Frederik Rietdijk
ef4442e827 Python: replace requests2 with requests tree-wide
See f63eb58573

The `requests2` attribute now throws an error informing that `requests`
should be used instead.
2017-05-07 12:56:09 +02:00
Olegs Jeremejevs
670afd010c virt-manager: add requests as dependency 2017-05-07 12:15:19 +03:00
Frederik Rietdijk
95534bc4ee virtinst: do not depend on glanceclient
because its not a dependency and because its broken.
2017-05-07 10:02:33 +02:00
Frederik Rietdijk
e184e02e7a virt-manager: do not depend on glanceclient
because its not a dependency and because its broken.
2017-05-07 10:01:47 +02:00
Michał Pałka
7c918ff7d4 virtualisation-xen: Fix xendomains startup
* Revert to using bash, not sh for the xendomains script to avoid syntax error
* Rewrite /bin/ls to ls in the xendomains script
2017-04-27 07:55:34 +00:00
Bjørn Forsman
ddb788b671 OVMF: get version number from edk2
OVMF is built from edk2 sources so that's where its version number comes
from (logically). The edk2 version number is 2014-12-10, so this change
only ensures the version numbers won't drift apart in the future. (There
is no hash change.)
2017-04-23 19:28:34 +02:00
Volth
1931ad0e2c qemu: 2.8.1 -> 2.9.0 2017-04-23 14:20:48 +02:00
Michael Raskin
f45f2fb67a Merge pull request #24549 from volth/qemu-2.8.1
qemu: 2.8.0 -> 2.8.1
2017-04-23 11:07:44 +02:00
Tim Steinbach
d95fb5f2ac Merge pull request #24632 from NeQuissimus/docker_17_04
docker-edge: init at 17.04
2017-04-05 20:51:14 -04:00
Tim Steinbach
1e589239b3
docker-edge: init at 17.04 2017-04-05 20:49:26 -04:00
Tim Steinbach
89188e2972
docker-distribution: 2.5.1 -> 2.6.0 2017-04-04 21:01:27 -04:00
Tim Steinbach
aefb9671bf
docker: 17.03.0 -> 17.03.1 2017-04-04 13:43:57 -04:00
Volth
160a84013e qemu: 2.8.0 -> 2.8.1 2017-04-02 00:21:56 +00:00
Franz Pletz
0018cd5a2d
libvirt packages: fix & clean up dependencies 2017-03-28 19:45:01 +02:00
Kosyrev Serge
0c3138e602 virtualbox: a more maintenance-free way of patching refs to dlopen()-affected dependencies 2017-03-28 01:32:11 +03:00
Nikolay Amiantov
52451067c7 virtualbox: wrap with Qt dependencies
Fixes GTK file open dialogs. Also make sure that linked applications really
exist, and update their list.
2017-03-28 00:29:40 +03:00
Franz Pletz
160fd7231e
virt-manager: needs file for building translations 2017-03-25 14:57:45 +01:00
volth
4e749683e6 virt-manager: 1.4.0 -> 1.4.1 (#24149) 2017-03-21 10:20:55 +01:00
Robin Gloster
07252dc83b
virtualbox: 5.1.14 -> 5.1.18 2017-03-20 16:05:20 +01:00
Michael Raskin
dfbd2dd659 Merge pull request #23624 from volth/virt-viewer-5.0
virt-viewer: 2.0 -> 5.0
2017-03-18 19:05:11 +01:00
Peter Hoeg
ee20e89644 virtmanager-qt: 0.39.60 -> 0.42.67 2017-03-18 12:32:49 +08:00
Tim Steinbach
f1c2d047ed Merge pull request #23872 from NeQuissimus/docker_17_03_0
docker: 1.13.1 -> 17.03.0-ce
2017-03-17 10:07:04 -04:00
Dan Peebles
dc61ff31a7 xhyve: update and fix to use our Hypervisor framework
(this is a cherry-picked version of f3b65f67d9,
which got reverted because it depended on my 10.11 frameworks, which were
flawed)
2017-03-14 22:38:35 -04:00
Tim Steinbach
aed4918795
docker: 1.13.1 -> 17.03.0-ce 2017-03-14 08:02:35 -04:00
Volth
d4294265fd virt-viewer: 2.0 -> 5.0 2017-03-14 04:54:11 +00:00
Joachim Fasting
d082a29c3a
runc: use removeReferencesTo 2017-03-11 15:17:36 +01:00
Joachim Fasting
c4fe196087
docker: use removeReferencesTo 2017-03-11 15:17:34 +01:00
Joachim Fasting
0c6a1eaa43
containerd: use removeReferencesTo 2017-03-11 15:17:32 +01:00
aszlig
0a7673d202
qemu_test: Rebase force-uid0-on-9p.patch
This reverts commit 3a4e2376e4.

The reverted commit caused the fix for CVE-2016-9602 not to be applied
for qemu_test because it conflicts with the force-uid0-on-9p.patch.

So with the rebase of the patch on top of the changes of the
CVE-2016-9602.patch, both patches no longer conflict with each other.

I've tested this with the "misc" NixOS test and it succeeds.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-03-11 15:16:49 +01:00