The MariaDB version 10.6 doesn't seem supported with current Nextcloud
versions and the test fails with the following error[1]:
nextcloud # [ 14.950034] nextcloud-setup-start[1001]: Error while trying to initialise the database: An exception occurred while executing a query: SQLSTATE[HY000]: General error: 4047 InnoDB refuses to write tables with ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE.
According to a support-thread in upstream's Discourse[2] this is because
of a missing support so far.
Considering that we haven't received any bugreports so far - even though
the issue already exists on master - and the workaround[3] appears to
work fine, an evaluation warning for administrators should be
sufficient.
[1] https://hydra.nixos.org/build/155015223
[2] https://help.nextcloud.com/t/update-to-next-cloud-21-0-2-has-get-an-error/117028/15
[3] setting `innodb_read_only_compressed=0`
Move to a forefront launch of the daemon. Doing so allowed us
to move the service from forking to simple to avoid the
missing pid error log.
Also:
- Make the dbus dependency explicit.
The MemoryDenyWriteExecute systemd option is widely known to be
incompatible with nodejs, and causes service crashes as reported in #119687.
Fixes#119687.
This is to address a regression introduced in #131118.
When syncing the first dataset, syncoid expects that the target
dataset doesn't exist to have a clean slate to work with. So during
runtime we'll check if the target dataset does exist and if it doesn't
- delegate the permissions to the parent dataset instead.
But then, on unallow, we do the unallow on both the target and the
parent since the target dataset should have been created at this
point, so the unallow can't know which dataset that got permissions
just by which datasets exists.
This change is strictly functionally equivalent because we're just
lifting the transformation of `source` out of `mapAttrs` to the single point of
use (in escapeShellArgs).
This is also much faster because we can skip a map over all `etc` items.
When restoring a backup, discourse decompresses the backup archive in
the /share/discourse/tmp dir. Before this change, it is linked to /run
which is typically backed by memory, so the backup will fail to
restore if you do not have enough memory on your system to contain the
backup. This has already happened to me on two small forums.
This moves tmp to the StateDirectory /var/lib/discourse/tmp which is
typically backed by disk.
Using builtins.readFile to load upstream defaults is a clever trick, but
it's not allowed in restricted evaluation mode: which means it fails on
Hydra, for example. Besides - in Nixpkgs - depending on derivation as
inputs is considered bad practice and should be avoided.
* nixos/opensmtpd: Add missing brackets in config
Without this commit, you end up missing the sendmail suid wrapper,
because the "program" attribute would not override the right thing.
* Update nixos/modules/services/mail/opensmtpd.nix
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
Apparently setting a variable via `environment.variables` when the same
is already present in `environment.sessionVariables` (that is merged
into the former option) creates a conflict.
For reference: this started with the change in #101274.
The `services.mastodon` module currently hardcodes sidekiq's concurrency
to 25, but doesn't set a DB pool size, which defaults to 5 or the number
of configured web threads.
(This behaviour is very strange, and arguably a mastodon bug.)
This also makes sidekiq's concurrency configurable, because 25 is a tad
high for the hardware I'm running it on.
After recent change `services.smokeping.enable = true;` system
started failing the build as:
```
nixpkgs-master $ nix build --no-link -f nixos system --keep-going
...
Checking that Nix store paths of all wrapped programs exist... FAIL
The path /nix/store/kr2sr80g9ny74im6m6dyh9v44hnzm261-fping-5.0/bin/fping6 does not exist!
Please, check the value of `security.wrappers."fping6".source`.
```
`fping` does not provide `fping6` binary for a while. Let's just remove it.
Closes: https://github.com/NixOS/nixpkgs/issues/138581
Moving the service before multi-user.target (so the `hardened` test
continue to work the way it did before) can result in locking the kernel
too early. It's better to lock it a bit later and changing the test to
wait specifically for the disable-kernel-module-loading.service.
The current name is misleading: it doesn't contain cli arguments,
but several constants and utility functions related to qemu.
This commit also removes the use of `with import ...` for clarity.
- Detailed initial config generation process.
- Detailed Nginx Configuration.
- Detailed private/public conf split.
docs: Improved documentation of Pleroma service
Secrets are only in the private file, and in a draft format for avoiding GitHub
complaints.
Fixed Nginx configuration.
docs: Improved the Nginx reverse proxy settings of Pleroma service
Just setting the XKB_CONFIG_ROOT should be enough, so we don't need to
rebuild the xserver, xkbcomp and other packages anymore.
However, the variable has to be passed explicitely to scripts running at
build time: in particular to xkbvalidate and xkb-console-keymap.
Fixes:
```
activating the configuration...
warning: user ‘systemd-coredump’ has unknown group ‘systemd-coredump’
setting up /etc...
```
Oversight of #133166
Other services that depend on elasticsearch should be started after
it, but since the versions we're packaging have to run as
"Type=simple", they're started as soon as the elasticsearch binary has
been executed, likely winning the race against it.
This makes sure elasticsearch is up and running, responding to a
simple query, before dependents are started.
When cross-compiling, we can't run the runtime shell to check syntax
if it's e.g. for a different architecture. We have two options here.
We can disable syntax checking when cross compiling, but that risks
letting errors through. Or, we can do what I've done here, and change
the syntax check to use stdenv's shell instead of the runtime shell.
This requires the stdenv shell and runtime shell to be broadly
compatible, but I think that's so ingrained in Nixpkgs anyway that
it's fine. And this way we avoid conditionals that check for cross.
Add a shell script that checks if the paths of all wrapped programs
actually exist to catch mistakes. This only checks for Nix store paths,
which are always expected to exist at build time.
This updates systemd to version v249.4 from version v247.6.
Besides the many new features that can be found in the upstream
repository they also introduced a bunch of cleanup which ended up
requiring a few more patches on our side.
a) 0022-core-Handle-lookup-paths-being-symlinks.patch:
The way symlinked units were handled was changed in such that the last
name of a unit file within one of the unit directories
(/run/systemd/system, /etc/systemd/system, ...) is used as the name
for the unit. Unfortunately that code didn't take into account that
the unit directories themselves could already be symlinks and thus
caused all our units to be recognized slightly different.
There is an upstream PR for this new patch:
https://github.com/systemd/systemd/pull/20479
b) The way the APIVFS is setup has been changed in such a way that we
now always have /run. This required a few changes to the
confinement tests which did assert that they didn't exist. Instead of
adding another patch we can just adopt the upstream behavior. An
empty /run doesn't seem harmful.
As part of this work I refactored the confinement test just a little
bit to allow better debugging of test failures. Previously it would
just fail at some point and it wasn't obvious which of the many
commands failed or what the unexpected string was. This should now be
more obvious.
c) Again related to the confinement tests the way a file was tested for
being accessible was optimized. Previously systemd would in some
situations open a file twice during that check. This was reduced to
one operation but required the procfs to be mounted in a units
namespace.
An upstream bug was filed and fixed. We are now carrying the
essential patch to fix that issue until it is backported to a new
release (likely only version 250). The good part about this story is
that upstream systemd now has a test case that looks very similar to
one of our confinement tests. Hopefully that will lead to less
friction in the long run.
https://github.com/systemd/systemd/issues/20514https://github.com/systemd/systemd/pull/20515
d) Previously we could grep for dlopen( somewhat reliably but now
upstream started using a wrapper around dlopen that is most of the
time used with linebreaks. This makes using grep not ergonomic
anymore.
With this bump we are grepping for anything that looks like a
dynamic library name (in contrast to a dlopen(3) call) and replace
those instead. That seems more robust. Time will tell if this holds.
I tried using coccinelle to patch all those call sites using its
tooling but unfornately it does stumble upon the _cleanup_
annotations that are very common in the systemd code.
e) We now have some machinery for libbpf support in our systemd build.
That being said it doesn't actually work as generating some skeletons
doesn't work just yet. It fails with the below error message and is
disabled by default (in both minimal and the regular build).
> FAILED: src/core/bpf/socket_bind/socket-bind.skel.h
> /build/source/tools/build-bpf-skel.py --clang_exec /nix/store/x1bi2mkapk1m0zq2g02nr018qyjkdn7a-clang-wrapper-12.0.1/bin/clang --llvm_strip_exec /nix/store/zm0kqan9qc77x219yihmmisi9g3sg8ns-llvm-12.0.1/bin/llvm-strip --bpftool_exec /nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool --arch x86_64 ../src/core/bpf/socket_bind/socket-bind.bpf.c src/core/bpf/socket_bind/socket-bind.skel.h
> libbpf: elf: socket_bind_bpf is not a valid eBPF object file
> Error: failed to open BPF object file: BPF object format invalid
> Traceback (most recent call last):
> File "/build/source/tools/build-bpf-skel.py", line 128, in <module>
> bpf_build(args)
> File "/build/source/tools/build-bpf-skel.py", line 92, in bpf_build
> gen_bpf_skeleton(bpftool_exec=args.bpftool_exec,
> File "/build/source/tools/build-bpf-skel.py", line 63, in gen_bpf_skeleton
> skel = subprocess.check_output(bpftool_args, universal_newlines=True)
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 424, in check_output
> return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 528, in run
> raise CalledProcessError(retcode, process.args,
> subprocess.CalledProcessError: Command '['/nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool', 'g', 's', '../src/core/bpf/socket_bind/socket-bind.bpf.o']' returned non-zero exit status 255.
> [102/1457] Compiling C object src/journal/libjournal-core.a.p/journald-server.c.oapture output)put)ut)
> ninja: build stopped: subcommand failed.
f) We do now have support for TPM2 based disk encryption in our
systemd build. The actual bits and pieces to make use of that are
missing but there are various ongoing efforts in that direction.
There is also the story about systemd in our initrd to enable this
being used for root volumes. None of this will yet work out of the
box but we can start improving on that front.
g) FIDO2 support was added systemd and consequently we can now use
that. Just with TPM2 there hasn't been any integration work with
NixOS and instead this just adds that capability to work on that.
Co-Authored-By: Jörg Thalheim <joerg@thalheim.io>
To keep backward compatibility and have a typing would require making
all options null by default, adding a defaultText containing the actual
value, write the default value logic based on `!= null` and replacing
the nulls laters. This pretty much defeats the point of having used
a submodule type.
The security.wrappers option is morally a set of submodules but it's
actually (un)typed as a generic attribute set. This is bad for several
reasons:
1. Some of the "submodule" option are not document;
2. the default values are not documented and are chosen based on
somewhat bizarre rules (issue #23217);
3. It's not possible to override an existing wrapper due to the
dumb types.attrs.merge strategy;
4. It's easy to make mistakes that will go unnoticed, which is
really bad given the sensitivity of this module (issue #47839).
This makes the option a proper set of submodule and add strict types and
descriptions to every sub-option. Considering it's not yet clear if the
way the default values are picked is intended, this reproduces the current
behavior, but it's now documented explicitly.
