postgis: cleanup
Another part of https://github.com/NixOS/nixpkgs/pull/38698, though I did cleanup even more.
Moving docs to separate output should save another 30MB.
I did pin poppler to 0.61 just to be sure GDAL doesn't break again next
time poppler changes internal APIs.
* postgresql: reorganize package and it's extensions
Extracts some useful parts of https://github.com/NixOS/nixpkgs/pull/38698,
in particular, it's vision that postgresql plugins should be namespaced.
He prefers to contribute to his own nixpkgs fork triton.
Since he is still marked as maintainer in many packages
this leaves the wrong impression he still maintains those.
For large setups it is useful to list all databases explicit
(for example if temporary databases are also present) and store them in extra
files.
For smaller setups it is more convenient to just backup all databases at once,
because it is easy to forget to update configuration when adding/renaming
databases. pg_dumpall also has the advantage that it backups users/passwords.
As a result the module becomes easier to use because it is sufficient
in the default case to just set one option (services.postgresqlBackup.enable).
Although this can be added to `extraOptions` I figured that it makes
sense to add an option to explicitly promote this feature in our
documentation since most of the self-hosted gitea instances won't be
intended for common use I guess.
Also added a notice that this should be added after the initial deploy
as you have to register yourself using that feature unless the install
wizard is used.
Nexus increased their default minimum disk space requirement to 4GB:
```
com.orientechnologies.orient.core.exception.OLowDiskSpaceException: Error occurred while executing a
write operation to database 'OSystem' due to limited free space on the disk (1823 MB). The database
is now working in read-only mode. Please close the database (or stop OrientDB), make room on your hard
drive and then reopen the database. The minimal required space is 4096 MB. Required space is now
set to 4096MB (you can change it by setting parameter storage.diskCache.diskFreeSpaceLimit) .
server# [ 72.560866] zqnav3mg7m6ixvdcacgj7p5ibijpibx5-unit-script-nexus-start[627]: DB name="OSystem"
```
Including the rest on the VM 8GB should be the most suitable solution.
As the installer test also takes 8GB of disk size this should still be
in an acceptable range.
According to systemd-nspawn(1), --network-bridge implies --network-veth,
and --port option is supported only when private networking is enabled.
Fixes#52417.
Introduces the option security.protectKernelImage that is intended to control
various mitigations to protect the integrity of the running kernel
image (i.e., prevent replacing it without rebooting).
This makes sense as a dedicated module as it is otherwise somewhat difficult
to override for hardened profile users who want e.g., hibernation to work.
Although the package itself builds fine, the module fails because it
tries to log into a non-existant file in `/var/log` which breaks the
service. Patching to default config to log to stdout by default fixes
the issue. Additionally this is the better solution as NixOS heavily
relies on systemd (and thus journald) for logging.
Also, the runtime relies on `/etc/localtime` to start, as it's not
required by the module system we set UTC as sensitive default when using
the module.
To ensure that the service's basic functionality is available, a simple
NixOS test has been added.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
The intention of the previous change was to move krb5-config to .dev (it
gives the locations of headers), but it grabbed all of the user-facing
binaries too. This puts them back.
Allow switching out kerberos server implementation.
Sharing config is probably sensible, but implementation is different enough to
be worth splitting into two files. Not sure this is the correct way to split an
implementation, but it works for now.
Uses the switch from config.krb5 to select implementation.
They consistently fail since openjdk bump with some out-of-space errors.
That's not a problem by itself, but each test instance ties a build slot
for many hours and consequently they also delay channels as those wait
for all builds to finish.
Feel free to re-enable when fixed, of course.
The test now runs wayland, which means we can no longer use X11 style testing.
Instead we get gnome shell to execute javascript through its dbus interface.
Since 83b27f60ce, the tests were moved
into all-tests.nix and some of the tooling has changed so that
subattributes of test expressions are now recursively evaluated until a
derivation with a .test attribute has been found.
Unfortunately this isn't the case for all of the tests and the
runInMachine doesn't use the makeTest function other tests are using but
instead uses runInMachine, which doesn't generate a .test attribute.
Whener a .test attribute wasn't found by the new handleTest function, it
recurses down again until there is no value left that is an attribute
set and subsequently returns its unchanged value. This however has the
drawback that instead of getting different attributes for each
architecture we only get the last architecture in the supportedSystems
list.
In the case of the release.nix, the last architecture in
supportedSystems is "aarch64-linux", so the runInMachine test is always
built on that architecture.
In order to work around this, I changed runInMachine to emit a .test
attribute so that it looks to handleTest like it was a test created via
makeTest.
Signed-off-by: aszlig <aszlig@nix.build>
Docker images used to be, essentially, a linked list of layers. Each
layer would have a tarball and a json document pointing to its parent,
and the image pointed to the top layer:
imageA ----> layerA
|
v
layerB
|
v
layerC
The current image spec changed this format to where the Image defined
the order and set of layers:
imageA ---> layerA
|--> layerB
`--> layerC
For backwards compatibility, docker produces images which follow both
specs: layers point to parents, and images also point to the entire
list:
imageA ---> layerA
| |
| v
|--> layerB
| |
| v
`--> layerC
This is nice for tooling which supported the older version and never
updated to support the newer format.
Our `buildImage` code only supported the old version, so in order for
`buildImage` to properly generate an image based on another image
with `fromImage`, the parent image's layers must fully support the old
mechanism.
This is not a problem in general, but is a problem with
`buildLayeredImage`.
`buildLayeredImage` creates images with newer image spec, because
individual store paths don't have a guaranteed parent layer. Including
a specific parent ID in the layer's json makes the output less likely
to cache hit when published or pulled.
This means until now, `buildLayeredImage` could not be the input to
`buildImage`.
The changes in this PR change `buildImage` to only use the layer's
manifest when locating parent IDs. This does break buildImage on
extremely old Docker images, though I do wonder how many of these
exist.
This work has been sponsored by Target.
GitLab 11.5.1 dropped the dependency to posix_spawn, which is broken on
32bit. (See https://gitlab.com/gitlab-org/gitlab-ce/issues/53525)
The only part missing is decreasing virtualisation.memorySize to
something that a 32 bit qemu still executes.
The maximum seems to be 2047, and tests passed with that value for me.
This also includes a full end-to-end CockroachDB clustering test to
ensure everything basically works. However, this test is not currently
enabled by default, though it can be run manually. See the included
comments in the test for more information.
Closes#51306. Closes#38665.
Co-authored-by: Austin Seipp <aseipp@pobox.com>
Signed-off-by: Austin Seipp <aseipp@pobox.com>
When reworking the rspamd workers I disallowed `proxy` as a type and
instead used `rspamd_proxy` which is the correct name for that worker
type. That change breaks peoples existing config and so I have made this
commit which allows `proxy` as a worker type again but makes it behave
as `rspamd_proxy` and prints a warning if you use it.
This commit adds an assertion that checks that either `configFile` or
`configuration` is configured for alertmanager. The alertmanager config
can not be an empty attributeset. The check executed with `amtool` fails
before the service even has the chance to start. We should probably not
allow a broken alertmanager configuration anyway.
This also introduces a test for alertmanager configuration that piggy
backs on the existing prometheus tests.
The nixos test is a bit misleading, as the given nginx configuration
would always cause gitlab to redirect to localhost, which is clearly not
what you want in a production setup.
Instead we now enable services.nginx.recommendedProxySettings,
curl against http://gitlab, and assure we get redirected to that same
hostname, too.
previously one of the tests would fail with
boot-after-install: starting vm
Path length (109) is longer than maximum supported length (108) and will be truncated at /nix/store/0ingn8cwwnl84i374hcl6nafsm2c5m2p-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi/Socket.pm line 872, <__ANONIO__> line 268.
boot-after-install# qemu-system-x86_64: -monitor unix:./monitor: Failed to connect socket ./monitor: No such file or directory
error: QEMU died prematurely
QEMU died prematurely
vde_switch: EOF on stdin, cleaning up and exiting
cleaning up
builder for '/nix/store/zbpxwwxwy7f6z5z3kg4nf5mjqsywzjvx-vm-test-run-installer-filesystemEncryptedWithKeyfile.drv' failed with exit code 4
Shortening the test name fixes the issue.
