The motivation for this is that some applications are unaware
of this feature and can set their volume to 100% on startup
harming people ears and possiblly blowing someone's audio
setup.
I noticed this in #54594 and by extension epiphany[0].
Please also note that many other distros have this default for
the reason outlined above.
Closes#5632#54594
[0]: https://bugzilla.gnome.org/show_bug.cgi?id=675217
- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
Having pam_unix set to "sufficient" means early-succeeding account
management group, as soon as pam_unix.so is succeeding.
This is not sufficient. For example, nixos modules might install nss
modules for user lookup, so pam_unix.so succeeds, and we end the stack
successfully, even though other pam account modules might want to do
more extensive checks.
Other distros seem to set pam_unix.so to 'required', so if there are
other pam modules in that management group, they get a chance to do some
validation too.
For SSSD, @PsyanticY already added a workaround knob in
https://github.com/NixOS/nixpkgs/pull/31969, while stating this should
be the default anyway.
I did some thinking in what could break - after this commit, we require
pam_unix to succeed, means we require `getent passwd $username` to
return something.
This is the case for all local users due to the passwd nss module, and
also the case for all modules installing their nss module to
nsswitch.conf - true for ldap (if not explicitly disabled) and sssd.
I'm not so sure about krb5, cc @eqyiel for opinions. Is there some nss
module loaded? Should the pam account module be placed before pam_unix?
We don't drop the `security.pam.services.<name?>.sssdStrictAccess`
option, as it's also used some lines below to tweak error behaviour
inside the pam sssd module itself (by changing it's 'control' field).
This is also required to get admin login for Google OS Login working
(#51566), as their pam_oslogin_admin accounts module takes care of sudo
configuration.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
* run as user 'slurm' per default instead of root
* add user/group slurm to ids.nix
* fix default location for the state dir of slurmctld:
(/var/spool -> /var/spool/slurmctld)
* Update release notes with the above changes
TrueCrypt has been retired for a while now and the source archive we
pointed to is gone. Moreover the VeraCrypt fork is available, maintained
and fixes issues previous audits found in TrueCrypt.
Nixpkgs' channel currently can't move forward so long as there is a
trace in evaluating the top-level arguments. Which means that it isn't
possible to add a warning message to warn users of future package
removal.
So the only way forward appears to be just removing the alias
altogether.
(cherry picked from commit b4133ebc17c2742a76d912f4f0bf46719bc7800e)
- New dependency on 'getconf' binary for
3aa619e9ef/src/vm_memory_monitor.erl (L448)
- New dependency on 'socat' for systemd notifications
4a3ee3a336/src/rabbit.erl (L361)
- elixir_1_6 for a new 'rabbitmqctl' tool
- Replace patching with providing custom PATH, as we already have some
other things here
- Renamed package in all-packages.nix from a legacy spelling
This is taken from the 18.09 change, which was reverted on release-18.09
but not master. The now-false 18.09 release notes were just removed from
master in 29854e2426, but since the
underlying change is still there, release notes for 19.03 are warranted.
This commit takes the now-reverted release notes and reuses them for
that.
Fixed minor issue where kube-addon manager complaints about
/opt/namespace.yaml missing.
Added release notes with reference to Kubernetes 1.11 release notes.
closes#43882
This adds a release notes entry to make users (and especially
developers) aware so they no longer need to use </para><para> in option
descriptions as this is now done automatically on every two consecutive
newlines.
More details can be found in the commit message of f865d0feab.
Signed-off-by: aszlig <aszlig@nix.build>
Switch from slim to lightdm as the display-manager.
If plasma5 is used as desktop-manager use sdddm.
If gnome3 is used as desktop-manager use gdm.
Based on #12516
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
Kubernetes dashboard currently has cluster admin permissions,
which is not recommended.
- Renamed option "services.kubernetes.addons.dashboard.enableRBAC" to "services.kubernetes.addons.dashboard.rbac.enable"
- Added option "services.kubernetes.addons.dashboard.rbac.clusterAdmin", default = false.
- Setting recommended minimal permissions for the dashboard in accordance with https://github.com/kubernetes/dashboard/wiki/Installation
- Updated release note for 18.09.
- Added option 'cni.configDir' to allow for having CNI config outside of nix-store
Existing behavior (writing verbatim CNI conf-files to nix-store) is still available.
- Removed unused option 'apiserver.publicAddress' and changed 'apiserver.address' to 'bindAddress'
This conforms better to k8s docs and removes existing --bind-address hardcoding to 0.0.0.0
- Fixed c/p mistake in apiserver systemd unit description
- Updated 18.09 release notes to reflect changes to existing options
And fixed some typos from previous PR
- Make docker images for Kubernetes Dashboard and kube-dns configurable
- Added information regarding breaking changes to release note for 18.09
- Changed golang version comment in kubernetes package
- Added @johanot to maintainers list
This introduces an option that allows us to turn off stateful generation
of Diffie-Hellman parameters, which in some way is still "stateful" as
the generated DH params file is non-deterministic.
However what we can avoid with this is to have an increased surface for
failures during system startup, because generation of the parameters is
done during build-time.
Aside from adding a NixOS VM test it also restructures the type of the
security.dhparams.params option, so that it's a submodule.
A new defaultBitSize option is also there to allow users to set a
system-wide default.
I added a release notes entry that described what has changed and also
included a few notes for module developers using this module, as the
first usage already popped up in NixOS/nixpkgs#39507.
Thanks to @Ekleog and @abbradar for reviewing.
This is not only to make users aware of the changes but also to give a
heads up to developers which are using the module. Specifically if they
rely on security.dhparams.path only.
Signed-off-by: aszlig <aszlig@nix.build>
The following changes have been applied:
- the property `http.headers.X-Content-Type-Options` must a list of
strings rather than a serialized list
- instead of `/etc/docker/registry/config.yml` the configuration will be
written with `pkgs.writeText` and the store path will be used to run
the registry. This reduces the risk of possible impurities by relying
on the Nix store only.
- cleaned up the property paths to easy readability and reduce the
verbosity.
- enhanced the testcase to ensure that digests can be deleted as well
- the `services.docker-registry.extraConfig` object will be merged with
`registryConfig`
/cc @ironpinguin
As suggested in https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745
the versioning attributes in `lib` should be consistent to
`nixos/version` which implicates the following changes:
* `lib.trivial.version` -> `lib.trivial.release`
* `lib.trivial.suffix` -> `lib.trivial.versionSuffix`
* `lib.nixpkgsVersion` -> `lib.version`
As `lib.nixpkgsVersion` is referenced several times in `NixOS/nixpkgs`,
`NixOS/nix` and probably several user's setups. As the rename will cause
a notable impact it's better to keep `lib.nixpkgsVersion` as alias with
a warning yielded by `builtins.trace`.
The `clementine` package is actually released under Apache license, but
requires the unfree `libspotify` package to build.
Now `nixpkgs.clementine` points to the free derivation and
`nixpkgs.clementineUnfree` has been introduced for the package bundled
with spotify support.
Fixes#38315
The original idea behind this change (described in ticket #11064) was to
improve the assertions to avoid that users of the X server accidentally
forget to configure a DM or WM.
However this caused several issues with setups that require X, but no DM
or WM. The keymap testcases became instable as well as now disabling DMs
needs to be done explicitly.
(see https://github.com/NixOS/nixpkgs/pull/31268#issuecomment-347080036)
In the end the idea behind the change and #11064 was obviously a
mistake, so reverting it completely for now should be fine.
I was mainly considering Jellyfish and Jaguar (and Jackrabbit).
Originally I was inclined for Jellyfish, but then I thought of the
release T-shirts someone makes and it didn't seem suitable...
Jaguar would keep the name referring to a car as well, but as a
not-too-old (Mac) OS version is codenamed that way, I didn't go for it.
Eelco Dolstra wrote:
Hm, this is not really the intended use of stateVersion. From the description:
Every once in a while, a new NixOS release may change
configuration defaults in a way incompatible with stateful
data. For instance, if the default version of PostgreSQL
changes, the new version will probably be unable to read your
existing databases. To prevent such breakage, you can set the
value of this option to the NixOS release with which you want
to be compatible. The effect is that NixOS will option
defaults corresponding to the specified release (such as using
an older version of PostgreSQL).
So this is only intended for options that have some corresponding on-disk state. AFAICT this is not the case for sound. In any case stateVersion is a necessary evil that only exists because we can't just upgrade Postgres databases or change SSH host keys. It's not necessary for things like whether sound is enabled. (If the user discovers that sound is suddenly disabled, they can just enable it.)
I had some vague recollection that we also had a configVersion option setting to control the defaults for non-state-related options, but I can't find it so maybe it was only discussed.
addPassthru became unused in #33057, but its signature was changed at the same
time. This commit restores the original signature and updates the warning and
the changelog.
This was only applicable to very specific hardware, and the only person
with an apparent interest in maintaining it (me) no longer uses the
hardware in question.
before:
- /var/run/memcached is a bad default for a socket path, since its
parent directory must be writeable by memcached.
- Socket directory was not created by the module itself -> this was
left as a burden to the user?
- Having a static uid with a dynamic user name is not very useful.
after:
- Replace services.memcached.socket by a boolean flag. This simplifies
our code, since we do not have to check if the user specifies a
path with a parent directory that should be owned by memcached
(/run/memcached/memcached.sock -> /run/memcached).
- Remove fixed uid/gid allocation. The only file ever owned by the
daemon is the socket that will be recreated on every start.
Therefore user and group ids do not need to be static.
- only create the memcached user, if the user has not specified a
different one. The major use case for changing option is to allow
existing services (such as php-fpm) opening the local unix socket.
If we would unconditionally create a user that option would be
useless.
Since ssh-dss is no longer supported by default, users relying on those
keys for their login may be locked out. They should ideally use stronger
keys, but adding the support for ssh-dss back in can also be done
through extraConfig.
This reverts commit 93c54acf97.
This reopens#30517 @nbp @Ma27
Breaking people's config for this is hardly reasonable as is. If it
absolutely cannot be avoided, at the very least, we need to provide
clear instructions on what people need to upgrade in their config. I
actually had to bisect to the commit, to even find out what property I
should change or define, as the error message was useless. It didn't
even mention a property name.
Discussion on the PR seems to be ongoing, so I'm reverting this, so we
don't break people's systems on unstable.
postage is no longer maintained and has been replaced by the identical pgmanage. See:
https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage
The following error is raised when a user enables the deprecated `services.postage.enable` option:
Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
Also unifies the BIOS and UEFI installation instructions.
It's a fairly basic usage, but it makes explicity the fact that
you should at least have a main partition and a swap partition,
and will save some users a bit of internet searching while they
are getting set up.
This is a squash commit of the joint work from:
* Jan Tojnar (@jtojnar)
* Linus Heckemann (@lheckemann)
* Ryan Mulligan (@ryantm)
* romildo (@romildo)
* Tom Hunger (@teh)
This commit readds and updates the 1.x package from 1.1.4 to 1.1.6 which
also includes the needed command for migrating to 2.x
The module is adjusted to the version change, defaulting to radicale2 if
stateVersion >= 17.09 and radicale1 otherwise. It also now uses
ExecStart instead of the script service attribute. Some missing dots at
the end of sentences were also added.
I added a paragraph in the release notes on how to update to a newer
version.
