`xsslock` (which was originally packaged in 6cb1d1aaaf)
is a simple screensaver which connects a given screen locker (e.g.
`i3lock`) with `logind`. Whenever `loginctl lock-sessions` is invoked
the locker will be used to lock the screen. This works with its power
management features (e.g. `lid switch`) as well, so the PC can be locked
automatically when the lid is closed.
The module can be used like this:
```
{
services.xserver.enable = true;
programs.xss-lock.enable = true;
programs.xss-lock.lockerCommand = "i3lock";
}
```
My c6f7d43678 made the mistake of not
having enough defaults. Now both variables are default as the *explicit*
value of the other, or a fallback. The fallback of `system` is the
default of `localSystem.system`. The fallback of `localSystem` is not
the other default (projected), as that would cause a cycle, but `{
system = builtins.currentTime; }` just as nixpkgs itself does it.
`statsd` is a daemon written in `node` to gather statistics over UDP.
The current test ensures that a port is open, but the basic
functionality isn't sufficiently tested.
This patch contains the following changes:
* Simplified port scanning (`waitForOpenPort` rather than `netcat` magic).
* Issue a TCP command to check the health of the `statsd` server.
* Simple script to check if `statsd` receives data over UDP and confirms
the basic functionality of the TCP interface on `8126` for admin
purposes.
* networking/stubby.nix: implementing systemd service module for stubby
This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.
* networking/stubby.nix: merging back module list
re-merging the module list to remove unecessary changes.
* networking/stubby.nix: removing unecessary capabilities flag
This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.
* networking/stubby.nix: adding debug level logging bool
Adding the option to turn on debug logging.
* networking/stubby.nix: clarifying idleTimeout and adding systemd target
Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.
* networking/stubby.nix: Restrict options with types.enum
This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.
* networking/stubby.nix: cleaning up documentation
Cleaning up docs, adding literal tags to settings, and removing
whitespace.
* networking/stubby.nix: fixing missing linebreak in comments
* networking/stubby.nix: cleaning errant comments
* improve nix installation instructions
in the command
$ bash <(curl https://nixos.org/nix/install)
<(..) is a bashism. The documentation now show a command that does
not require to be executed by bash.
In commit 17dd7bcd89 the systemd unit
generator now uses lndir instead of "ln -s", so we need to have lndir
available in the Nix store for the installer tests to be able to build
the units and thus the whole system.
This should fix the installer tests, although I have only tested it with
the "simple" subtest.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @jtojnar, @xeji, @edolstra
When doing source routing/multihoming, it's practical to give names to routing
tables. The absence of the rt_table file in /etc make this impossible.
This patch recreates these files on rebuild so that they can be modified
by the user see NixOS#38638.
iproute2 is modified to look into config.networking.iproute2.confDir instead of
/etc/iproute2.
The manual still had a reference to an option that was already renamed
ages ago and a7ed44ccad made it 'visible'.
With the visible attribute set to false for extraKernelModules, the
option no longer appears in the manual and thus breaks the link from the
manual to the options.
This is easily fixed by referring to boot.initrd.kernelModules instead
of the obsolete option boot.initrd.extraKernelModules.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @rycee, @matthewbauer
The original `nexus` derivation required `/run/sonatype-work/nexus3`
which explicitly depended on the NixOS path structure.
This would break `nexus` for everyone using `nixpkgs` on a non-NixOS
system, additionally the module never created `/run/sonatype-work`, so
the systemd unit created in `services.nexus` fails as well. The issue
wasn't actively known as the `nixos/nexus` test wasn't registered in
Hydra (see #40257).
This patch contains the following changes:
* Adds `tests.nexus` to `release.nix` to run the test on Hydra.
* Makes JVM parameters configurable: by default all JVM options were located
in `result/bin/nexus.vmoptions` which made it quite hard to patch
these parameters. Now it's possible to override all parameters by
running `VM_OPTS_FILE=custom-nexus.vmoptions ./result/bin/nexus run`
(after patching the `nexus` shell script), additionally it's possible
to override these parameters with `services.nexus.vmoptions`.
* Bumped Nexus from 3.5.1 to 3.11.0
* Run the `nexus` test on Hydra with `callTest` in `nixos/release.nix`,
furthermore the test checks if the UI is available on the specified
port.
* Added myself as maintainer for the NixOS test and the package to have
some more people in case of further breakage.
* Added sufficient disk space to the `nexus` test, otherwise the service
fails with the following errors:
```
com.orientechnologies.orient.core.exception.ODatabaseException: Cannot create database 'accesslog'
com.orientechnologies.orient.core.exception.OLowDiskSpaceException: Error occurred while executing
a write operation to database 'accesslog' due to limited free space on the disk (242 MB). The database
is now working in read-only mode. Please close the database (or stop OrientDB), make room on your hard
drive and then reopen the database. The minimal required space is 256 MB. Required space is now set to
256MB (you can change it by setting parameter storage.diskCache.diskFreeSpaceLimit) .
```
/cc @ironpinguin @xeji
When a package contains a directory in one of the systemd directories
(like flatpak does), it is symlinked into the *-units derivation.
Then later, the derivation will try to create the directory, which
will fail:
mkdir: cannot create directory '/nix/store/…-user-units/dbus.service.d': File exists
builder for '/nix/store/…-user-units.drv' failed with exit code 1
Closes: #33233
GRUB 2.0 supports png, jpeg and tga. This will use the image's suffix to
load the right module.
As jpeg module is named jpeg, jpg is renamed jpeg.
If the user uses wrong image suffix for an image, it wouldn't work anyway.
This will leave up to two additional left-over files in /boot/ if user switches
through all the supported file formats. The module already left the png
image if the user disabled the splash image.
If docker is enabled, start mesos-slave.service after docker.service
to avoid a race condition that could result in mesos-slave to fail
with "Failed to create docker: Timed out getting docker version"
The pull request that added dhparams (#39507) was made at the time where
the dhparams module overhaul (#39526) wasn't done yet, so it's still
using the old mechanics of the module.
As stated in the release notes:
Module implementers should not set a specific bit size in order to let
users configure it by themselves if they want to have a different bit
size than the default (2048).
An example usage of this would be:
{ config, ... }:
{
security.dhparams.params.myservice = {};
environment.etc."myservice.conf".text = ''
dhparams = ${config.security.dhparams.params.myservice.path}
'';
}
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @qknight, @abbradar, @hrdinka, @leenaars
Regression introduced by d4468bedb5.
No systemd messages are shown anymore during VM test runs, which is not
very helpful if you want to find out about failures.
There is a bit of a conflict between testing and the change that
introduced the regression. While the mentioned commit makes sure that
the primary console is tty0 for virtualisation.graphics = false, our VM
tests need to have the serial console as primary console.
So in order to support both, I added a new virtualisation.qemu.consoles
option, which allows to specify those options using the module system.
The default of this option is to use the changes that were introduced
and in test-instrumentation.nix we use only the serial console the same
way as before.
For test-instrumentation.nix I didn't add a baudrate to the serial
console because I can't find a reason on top of my head why it should
need it. There also wasn't a reason stated when that was introduced in
7499e4a5b9.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @flokli, @dezgeg, @edolstra
after seeing
`adjtime failed: Invalid argument` in my syslog, I tried using
`ntpd -s` but it would trigger
`/etc/ntpd.conf: No such file or directory`
see https://github.com/NixOS/nixpkgs/issues/31885
Instead of running the daemon with a specific config file, use the
standard file so that user are able to use the ntp executable without
having to look for the current config file.
Tracking scripts in particular, cannot be included in extraOpts, because script declaration has to be above script usage in keepalived.conf.
Changes are fully backward compatible.
This introduces an option that allows us to turn off stateful generation
of Diffie-Hellman parameters, which in some way is still "stateful" as
the generated DH params file is non-deterministic.
However what we can avoid with this is to have an increased surface for
failures during system startup, because generation of the parameters is
done during build-time.
Aside from adding a NixOS VM test it also restructures the type of the
security.dhparams.params option, so that it's a submodule.
A new defaultBitSize option is also there to allow users to set a
system-wide default.
I added a release notes entry that described what has changed and also
included a few notes for module developers using this module, as the
first usage already popped up in NixOS/nixpkgs#39507.
Thanks to @Ekleog and @abbradar for reviewing.
Always enable both tty and serial console, but set preferred console
depending on cfg.graphical.
Even in qemu graphical mode, you can switch to the serial console via
Ctrl+Alt+3.
With that being done, you also don't need to specify
`systemd.services."serial-getty@ttyS0".enable = true;` either as described in
https://nixos.wiki/wiki/Cheatsheet#Building_a_service_as_a_VM_.28for_testing.29,
as systemd automatically spawns a getty on consoles passwd via cmdline.
This also means, vms built by 'nixos-rebuild build-vm' can simply be run
properly in nographic mode by appending `-nographic` to `result/bin/run-*-vm`,
without the need to explicitly add platform-specific QEMU_KERNEL_PARAMS.
This is not only to make users aware of the changes but also to give a
heads up to developers which are using the module. Specifically if they
rely on security.dhparams.path only.
Signed-off-by: aszlig <aszlig@nix.build>
This allows to set the default bit size for all the Diffie-Hellman
parameters defined in security.dhparams.params and it's particularly
useful so that we can set it to a very low value in tests (so it doesn't
take ages to generate).
Regardless for the use in testing, this also has an impact in production
systems if the owner wants to set all of them to a different size than
2048, they don't need to set it individually for every params that are
set.
I've added a subtest to the "dhparams" NixOS test to ensure this is
working properly.
Signed-off-by: aszlig <aszlig@nix.build>
When trying to run NSD to serve the root zone, one gets the following
error message:
error: illegal name: '.'
This is because the name of the zone is used as the derivation name for
building the zone file. However, Nix doesn't allow derivation names
starting with a period.
So whenever the zone is "." now, the file name generated is "root"
instead of ".".
I also added an assertion that makes sure the user sets
services.nsd.rootServer, otherwise NSD will fail at runtime because it
prevents serving the root zone without an explicit compile-time option.
Tested this by adding a root zone to the "nsd" NixOS VM test.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @hrdinka, @qknight
Without fcrontab being setuid, every attempt by an user in the fcron
group to edit their own crontab (via `fcrontab -e`) results in the
following error:
```
2018-05-06 11:29:07 ERROR could not change euid to 273: Operation not permitted
2018-05-06 11:29:07 ERROR fcron child aborted: this does not affect the main fcron daemon, but this may prevent a job from being run or an email from being sent.
```
Adding setuid by hand has resolved this issue and aligns with the way
fcrontab is installed on other distributions.
I ended up with a corrupted image with the debugfs contraption once, and
given I couldn't reproduce the problem I suppose that happens if the
filesystem of the builder runs out of space.
At least in this instance fsck could detect it, so let's add it as a
sanity check.
lib.optional returns a singleton or an empty list. Therefore the
argument does not need to be wrapped in a list.
An alternative patch could have used lib.optionals but seems like no
more elements are going to be added to the optional list.
This is apparent from the service file directory in plymouth:
├── multi-user.target.wants
│ ├── plymouth-quit.service -> ../plymouth-quit.service
│ └── plymouth-quit-wait.service -> ../plymouth-quit-wait.service
Leaving it unspecified caused gdm-wayland to crash on boot, see #39615.
The change made other display managers not quit plymouth properly however. By
removing "multi-user.target" from `plymouth-quit.after` this is resolved.
