This should fix the OpenJDK build, which was failing because paxctl is
in sbin and therefore not automatically added to $PATH.
http://hydra.nixos.org/build/15658346
Use the new allowedRequisites feature in stdenvLinux.
This way we properly check that the end-result stdenv of the quite
complicated multi-stage stdenvLinux building procedure is sane, and only
depends on the stuff that we know about.
Alternative would be to just disallowRequisites bootstrapTools, which is
the most common offender, but we have had other offenders in the past.
For these checks to actually fire, you currently have to use nixUnstable,
as the necessary feature will be released in Nix 1.8.
Now it should contain *all* information from stdenv/setup.sh of
the original mutiple-output branch.
However, the configurability of the output paths is much greater.
This is needed for multiple-output derivations,
where it is desirable to propagate deps and setup-hooks into $dev instead of $out.
Also drop an unused simple function which will not even make sense.
Now gcc is just another build input, making it possible in the future
to have a stdenv that doesn't depend on a C compiler. This is very
useful on NixOS, since it would allow trivial builders like
writeTextFile to work without pulling in the C compiler.
If $src refers to a directory, then always copy it. Previously, we
checked the extension first, so if the directory had an extension like
.tar, unpackPhase would fail.
If a build input is a regular file, use it as a setup hook. This makes
setup hooks more efficient to create: you don't need a derivation that
copies them to $out/nix-support/setup-hook, instead you can use the
file as is.
You can now register multiple values per named hook, e.g.
addHook preConfigure "echo foo"
addHook preConfigure "echo bar"
will cause ‘runHook preConfigure’ to run both ‘echo foo’ and ‘echo
bar’ (in that order). It will also call the shell function
preConfigure() or eval the shell variable $preConfigure, if
defined. Thus, if you don't call addHook, it works like the old hook
mechanism.
Allowing multiple hooks makes stdenv more modular and extensible. For
instance, multiple setup hooks can define a preFixup hook, and all of
these will be executed.
Commit 262c21ed46 purported to enable
ignoreNulls, but it was bogus because it set the flag on the wrong
derivation (i.e. stdenv rather than the result of mkDerivation).
Stdenv adapters are kinda weird and un-idiomatic (especially when they
don't actually change stdenv). It's more idiomatic to say
buildInputs = [ makeCoverageAnalysisReport ];
This removes the need for hacks like stdenv.regenerate. It also
ensures that overrideGCC is now stackable (so ‘stdenv = useGoldLinker
clangStdenv’ works).
setup.sh uses the anti-pattern `for f in $(find ...); do` in several
places. `find` returns one path per line, but `for` splits its arguments
by words, so paths which contain spaces are incorrectly split! The
correct way is `find ... | while read f; do`
Treating fixupPhase specially is really ugly. Also, it collides with
the work in the multiple-outputs branch (which already has support for
fixing up all outputs).
Partial revert of 0a44a09121.
Some programs, e.g. guile-config, has a shebang that ends in '\':
#!/usr/bin/guile-1.8 \
-e main -s
!#
;;;; guile-config --- utility for linking programs with Guile
;;;; Jim Blandy <jim@red-bean.com> --- September 1997
This currently breaks patchShebangs:
$ read oldPath arg0 args <<< 'shebang \'; echo $?
1
$ echo $oldPath
shebang
$ echo $arg0
$ echo $args
(And setup.sh/patchShebangs is run with 'set -e' so any command that
return non-zero aborts the build.)
Fix by telling 'read' to not interpret backslashes (with the -r flag):
$ read -r oldPath arg0 args <<< 'shebang \'; echo $?
0
$ echo $oldPath
shebang
$ echo $arg0
\
$ echo $args
Also needed: escape the escape characters so that sed doesn't interpret
them.
patchShebangs has a bug that shows itself on files that have the
executable bit set but have no shebang (i.e. a blank/empty first line).
The shell would then evaluate this:
if [ != '#!' ]; then
# not evaluated
fi
With proper quoting we get the correct behaviour:
if [ "" != '#!' ]; then
# this will be evaluated
fi
When building e.g. perl for the first time there is no perl in PATH yet,
so command -v perl will fail.
This brings back the previous behaviour of silently not patching
shebangs for which there is no available command in PATH.
Currently "/usr/bin/env python" is rewritten to "/nix/store/.../env
python". That doesn't really improve anything because the interpreter
still have to be located in $PATH at runtime. The result is that many
nix package expressions do .../bin/env fixup themselves.
Instead of everyone having to do this patching locally, add the
functionality to the standard environment patchShebangs function so that
everyone can benefit.
The function ‘mkDerivation’ now checks whether the current platform
type is included in a package's meta.platform field. If not, it
throws an exception:
$ nix-build -A linux --argstr system x86_64-darwin
error: user-thrown exception: the package ‘linux-3.10.15’ is not supported on ‘x86_64-darwin’
These packages also no longer show up in ‘nix-env -qa’ output. This
means, for instance, that the number of packages shown on
x86_64-freebsd has dropped from 9268 to 4764.
Since meta.platforms was also used to prevent Hydra from building some
packages, there now is a new attribute meta.hydraPlatforms listing the
platforms on which Hydra should build the package (which defaults to
meta.platforms).
meta.license is can be a string or a list of strings. But there is one
unhandled case where "unfree" (or "unfree-redistributable") is a part of
a list. It will currently not be detected as an "unfree" package and
Hydra will attempt to build it. This should fix it.
Example: http://hydra.nixos.org/build/6553461
set CMAKE_LIBRARY_PATH, CMAKE_INCLUDE_PATH based on NIX_CFLAGS_COMPILE and
NIX_LDFLAGS so that cmake's find_library like functions find all the libraries
gcc knows about thanks to the gcc wrapper
This is particular useful with myEnvFun which then also sets those CMAKE_* env
variables.`
Because setup.sh has to change this causes many rebuilds - thus it should be
included in a stdenv-update like branch
Also cmake builds in parallel perfectly fine
update cmake to latest minor number, I didn't change the patches,
just reapplied them manually recordin a new patch
Conflict in kerberos, which was updated both in master and in
stdenv-updates. Kept the stdenv-updates version, except pulled in the
enableParallelBuilding change from master.
Signed-off-by: Shea Levy <shea@shealevy.com>
Conflicts:
pkgs/development/libraries/kerberos/krb5.nix
Before this, the passthru attributes were only merged in with the
derivation attribute set, and there was no way to distinguish after the
fact which attributes were part of the derivation and which came from
passthru. Now passthru can be looked at separately as well.
Signed-off-by: Shea Levy <shea@shealevy.com>
Conflicts:
pkgs/development/libraries/libxslt/default.nix
Commit 1764ea2b0a introduced changes to libxslt
in an awkward way to avoid re-builds on Linux. This patch has been simplified
during this merge.
With multiple outputs, adding attributes to a derivation without
changing the {drv,out}Path is no longer as trivial as simply using the
`//' operator, as we usually want to add the attribute to _each_ output,
and even if we only care about one that one output can be reached via
multiple paths.
For stdenv.mkDerivation, we already had code in place to add passthru
and meta attributes to derivations. This commit simply factors part of
that code out into a lib function addPassthru, which takes a derivation
and an attribute set and appends the attribute set to each output of the
derivation.
Signed-off-by: Shea Levy <shea@shealevy.com>
Before, only the first output (and not even that when accessed through 'all' or its corresponding attribtue) had meta information and the relevant passthru attributes.
This doesn't change stdenv's hash and the tarball still builds, I'm pretty sure this is safe for master.
I'm not sure whether this was by intention, but so far postPatch hooks were
silently skipped whenever the patches list was empty. This change could possibly
change the build results of the following packages:
* gcc
* cmake (264)
* systemtap
* quemu-kvm
These packages all have in common that they have a postPatch hook and the
patches list can be empty when certain conditions are met.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
If set to false, mkDerivation will throw an exception if a package has
an unfree license. ‘release-lib.nix’ uses this to enforce that we
don't build unfree packages as part of the Nixpkgs channel. Since
this is set through Nixpkgs' ‘config’ argument, it's more finegrained
than $HYDRA_DISALLOW_UNFREE.
Conflicts:
pkgs/development/compilers/gcc/4.6/default.nix
pkgs/development/compilers/gcc/4.7/default.nix
The 4.7 had some weird parameters added in crossAttrs; I've removed
them, but I don't understand where they come from.
This is for consistency with terminology in stdenv (and the terms
"hostDrv" and "buildDrv" are not very intuitive, even if they're
consistent with GNU terminology).
This allows various applications. It allows users to set global
optimisation flags, e.g.
stdenv.userHook = ''NIX_CFLAGS_COMPILE+=" -funroll-loops"'';
But the impetus is as an alternative to issue #229, allowing impure
stdenv setup for people who want to use distcc:
stdenv.userHook = "source /my/impure/setup-script.sh";
This is probably a bad idea, but at least now it's a bad idea in
people's configuration and not in Nixpkgs. :-)
If the environment variable HYDRA_DISALLOW_UNFREE is set to "1", then
evaluation of a package with license "unfree" will throw an error.
Thus such packages or any packages that depend on them will fail to
evaluate.
what the new nix thinks the fuloong is.
Anyone having the old nix should use a nixpkgs previous to this change to build
the new nix. And then, with the new nix, he can use any newer nixpkgs revision.
svn path=/nixpkgs/trunk/; revision=31751
bash's pattern replacement feature. "replace-literal" is an
uncommon command so it was a headache during the bootstrap.
svn path=/nixpkgs/branches/stdenv-updates/; revision=31681
some redundant builds (e.g., GMP was built three times).
* Updated GMP to 5.0.2.
* Updated PPL to 0.11.2.
* Remove ad hoc flags to build GCC's dependencies statically.
Instead, use the ‘makeStaticLibraries’ stdenv adapter.
* Build GMP with C++ support by default.
svn path=/nixpkgs/branches/stdenv-updates/; revision=30891
These markers follow the format of those of `nix-store --print-build-trace',
which allows extraction of, say, phase durations in a similar way.
svn path=/nixpkgs/branches/stdenv-updates/; revision=26115
If a build expressions has set "enableParallelBuilding = true", then the
generic builder may utilize more than one CPU core to build that particular
expression. This feature works out of the box for GNU Make. Expressions that
use other build drivers like Boost.Jam or SCons have to specify appropriate
flags such as "-j${NIX_BUILD_CORES}" themselves.
svn path=/nixpkgs/trunk/; revision=23042
Instead, use the generic package override mechanism to use packages
from earlier bootstrap phases.
* Don't rely on the existence of attributes such as
`stdenv.coreutils'.
svn path=/nixpkgs/trunk/; revision=22991
If a build expressions has set "enableParallelBuilding = true", then the
generic builder may utilize more than one CPU core to build that particular
expression. This feature works out of the box for GNU Make. Expressions that
use other build drivers like Boost.Jam or SCons have to specify appropriate
flags such as "-j${NIX_BUILD_CORES}" themselves.
svn path=/nixpkgs/branches/stdenv-updates/; revision=22399
"meta" and "passthru", and these attributes will be appended to the usual
mkDerivation attributes only if the package is cross built.
This allows putting some of the cross-building logic in the mkDerivation
nix parameters, and not only in the final builder script, as it was until now.
svn path=/nixpkgs/trunk/; revision=20272
