This hopefully makes patchShebangs respect cross compilation. It
introduces the concept of the HOST_PATH. Nothing is ever executed on
it but instead used as a way to get the proper path using ‘command
-v’. Needs more testing.
/cc @ericson2314 @dtzwill
Fixes#33956Fixes#21138
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
package-build expects the recipe file name to match the Emacs package
name. `melpaBuild` takes an extra argument `ename` for the Emacs package
name (default: `pname`, the Nix package name) which is used to name the recipe
file.
Fixes: #43893
See also: #43609
This makes the command ‘nix-env -qa -f. --arg config '{skipAliases =
true;}'’ work in Nixpkgs.
Misc...
- qtikz: use libsForQt5.callPackage
This ensures we get the right poppler.
- rewrites:
docbook5_xsl -> docbook_xsl_ns
docbook_xml_xslt -> docbook_xsl
diffpdf: fixup
With the recent update of BusyBox to version 1.29.0 in
d6aa506e3b there is now a new dependency
on libresolv.
This now throws a runtime error when executing ash, eg. whenever we do
something like this:
nix-build -E 'with import ./. {}; vmTools.runInLinuxVM hello'
The resulting error will be:
.../ash: error while loading shared libraries: libresolv.so.2: cannot
open shared object file: No such file or directory
I tried to override BusyBox with enableStatic, but that still requires
parts of glibc:
Static linking against glibc, can't use --gc-sections
Trying libraries: crypt m resolv
Library crypt is not needed, excluding it
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Final link with: m resolv
In the long term maybe switching to a more minimal C library such as
musl would make more sense, but for now I just added libresolv.so to the
initrd which fixes the runtime error.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @rbvermaa
Signed-off-by: aszlig <aszlig@nix.build>
All package sets are simultaneously updated to accommodate changes to
package-build. Due to new restrictions in package-build, all packages using
`melpaBuild` must now provide a recipe file, even those packages which are not
included in upstream MELPA.
So far the runtimeDependencies variable has been rather useless unless
you also set dontPatchelf, because the patchelf setup hook ran *after*
the autoPatchelfHook and thus stripped off the additional RPATHs added
using runtimeDependencies.
I did this by moving the autoPatchelfHook to be run in postFixup instead
of fixupOutput, however I needed to replicate the for loop that runs the
hook on all outputs.
Until we have a way to influence order of execution for hooks I've
marked this with an XXX so that we can use fixupOutput again.
Tested this against all packages that use autoPatchelfHook using the
following and checking whether the output contains any errors concerning
shared libraries:
nix-build -E 'with import ./. { config.allowUnfree = true; };
runCommand "test-executables" {
drvs = [
masterpdfeditor franz zoom-us anydesk teamviewer maxx
oracle-instantclient cups-kyodialog3 virtlyst powershell
];
} "for i in $drvs; do for b in $i/bin/*; do \"$b\" || :; done; done"
'
Signed-off-by: aszlig <aszlig@nix.build>
Fixes: https://github.com/NixOS/nixpkgs/issues/43082
Cc: @Ericson2314
Since this is probably never the desired case and has led to actual
issues, see the comments at:
af1313e915
This might also happen when pulling a patch from GitHub or a similar web
interface without explicitly selecting the "raw" format.
Excludes and includes are implemented by passing the parameters to the
respective flags of `filterdiff`. Those were passed unescaped until now.
Since those flags expect patterns (similar to shell globs), something
like `/some/path/*` might be used to exclude or include all files in
some path. Without escaping the shell would expand the `*`, leading to
unexpected behaviour.
This commit was originally introduced as part of #41420 and then
reverted with the rest of that PR. However there was no reason to revert
his particular commit.
docker-tools tests load images without specifying any tag
value. Docker then uses the image with tag "latest" which doesn't
exist anymore since commit 39e678e24e.
In particular, this contains Firefox-related and libgcrypt updates.
Other larger rebuilds would apparently need lots of time to catch up
on Hydra, due to nontrivial rebuilds in other branches than staging.
A .la file specifies linker flags to link with the library it describes. Its
"dependency_libs" field lists the libraries that this library depends upon.
This list often contains "-l" flags without corresponding "-L" flags. Many
packages in Nixpkgs deal with this in one of these ways:
- delete .la file [1]
- clear dependency_libs [2]
- add -L flags to dependency_libs [3]
- propagate dependencies [4]
Sometimes "dependency_libs" contain wrong "-L" flags pointing to the "dev"
output with headers rather than to the main output with libraries. They have to
be edited or deleted to reduce closure size [5].
Deleting .la files is often but not always safe [6]. Atomatically deleting as
many of them as possible is complex [7]. Deleting .la files that describe
shared rather than static libraries is probably safe; but clearing their
"dependency_libs" field achieves the same effect with less potential for
unintended consequences. This is the approach that may be enabled for all
Nixpkgs.
[1] 2a79d296d3
[2] c83a530985
[3] 9e0dcf3bd9
[4] 01134e698f
[5] f6c73f1e37
[6] https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Handling_Libtool_Archives
[7] https://github.com/gentoo/gentoo/blob/fb1f2435/eclass/ltprune.eclass
If there is a shared object or executable that's using
position-independent code, the file's mime type is
"application/x-pie-executable", so until this change its dependencies
wouldn't be patched.
This simply adds the mime type to the search loop.
Signed-off-by: aszlig <aszlig@nix.build>
Attributes `imageName` and `imageTag` are exposed if the image is
built by our Nix tools but not if the image is pulled. So, we expose
these attributes for convenience and homogeneity.
Skopeo used by our docker tools was patched to work in the build
sandbox (it used /var/tmp which is not available in the sandbox).
Since this temporary directory can now be set at build time, we remove
the patch from our docker tools.
The extraCommands was, previously, simply put in the body of the script
using nix expansion `${extraCommands}` (which looks exactly like bash
expansion!).
This causes issues like in #34779 where scripts will eventually create
invalid bash.
The solution is to use a script like `run-as-root`.
* * *
Fixes#34779
toPath has confusing semantics and is never necessary; it can always
either just be omitted or replaced by pre-concatenating `/.`. It has
been marked as "!!! obsolete?" for more than 10 years in a C++
comment, hopefully removing it will let us properly deprecate and,
eventually, remove it.
The hack of using `crossConfig` to enforce stricter handling of
dependencies is replaced with a dedicated `strictDeps` for that purpose.
(Experience has shown that my punning was a terrible idea that made more
difficult and embarrising to teach teach.)
Now that is is clear, a few packages now use `strictDeps`, to fix
various bugs:
- bintools-wrapper and cc-wrapper
Regression introduced in 736848723e.
This commit most certainly hasn't been tested with sandboxing enabled
and breaks not only pullImage but also the docker-tools NixOS VM test
because it doesn't find it's certificate path and also relies on
/var/tmp being there.
Fixing the certificate path is the easiest one because it can be done
via environment variable.
I've used overrideAttrs for changing the hardcoded path to /tmp (which
is available in sandboxed builds and even hardcoded in Nix), so that
whenever someone uses Skopeo from all-packages.nix the path is still
/var/tmp.
The reason why this is hardcoded to /var/tmp can be seen in a comment in
vendor/github.com/containers/image/storage/storage_image.go:
Do not use the system default of os.TempDir(), usually /tmp, because
with systemd it could be a tmpfs.
With sandboxed builds this isn't the case, however for using Nix without
NixOS this could turn into a problem if this indeed is the case.
So in the long term this needs to have a proper solution.
In addition to that, I cleaned up the expression a bit.
Tested by building dockerTools.examples.nixFromDockerHub and the
docker-tools NixOS VM test.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @nlewo, @Mic92, @Profpatsch, @globin, @LnL7
The script would parse the output of `git submodule status` but
didn't handle paths with spaces in them. This would result in the
following error when trying to determine the URL of the submodule:
error: key does not contain a section: .url
* fetchs3: add configurable name
Change the default from "foo" to the basename of the s3 URL and make it
configurable.
* fetchs3: fix error on missing credentials.session_token
The session token should default to null instead of failing
* fetchs3: make use of the region argument
Set it to null if you don't want to use it
* fetchs3: prefer local build
Fetcher-types spend more time on network than CPU
Skopeo is used to pull images from a Docker registry (instead of a
Docker deamon in a VM).
An image reference is specified with its name and its digest which is
an immutable image identifier (unlike image name and tag).
Skopeo can be used to get the digest of an image, for instance:
$ skopeo inspect docker://docker.io/nixos/nix:1.11 | jq -r '.Digest'
... binutils and gcc add it already anyway.
Without this it's easy to get cross-toolchain paths longer than 256
chars and nix-daemon will then fail to commit them to /nix/store on XFS.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Adds a couple of useful NetBSD and OpenBSD derivations. Some of these
will be integrated into Nixpkgs later.
Noncomprehensive list:
- netbsd.getent
- netbsd.getconf
- netbsd.fts
- openbsd.mg
- netbsd.compat (can replace libbsd)
Since the script running is a failure condition, we should fail the
build properly, not leaving it up to the missing output to determine
that the build went wrong. This should partly address #38952 — nix
build will print out the build log on non-zero exits.
Also fix numberous bugs, such as:
- Not getting confused on more flags taking file arguments.
- Ensuring children reexport their children, but the original
binary/library doesn't.
- Not spawning children when it turns out we just dynamically link
under the threshold but our total number of inputs exceeeds it.
- Children were always named `libunnamed-*`, when that name was
supposed to be the last resort only.
ld-wrapper's own RPATH check hardcodes `.so`, but darwin uses `.dylib`
*and* (in practice due to lousy build systems) `.so`. We don't care
however because we never inject `--rpath` like that in practice on
Darwin. Hopefully someday we won't on linux either.
Pull request #38470 added support for running/building kernels without
modules. This got merged in 38e04bbf29 but
unfortunately while this works perfectly on kernels without modules it
also makes sure that *every* kernel gets no modules.
So all of our VM tests fail since that merge with something like this:
machine# loading module loop...
machine# modprobe: FATAL: Module loop not found in directory /lib/modules/4.14.33
machine# loading module vfat...
machine# modprobe: FATAL: Module vfat not found in directory /lib/modules/4.14.33
machine# loading module nls_cp437...
machine# modprobe: FATAL: Module nls_cp437 not found in directory /lib/modules/4.14.33
machine# loading module nls_iso8859-1...
machine# modprobe: FATAL: Module nls_iso8859-1 not found in directory /lib/modules/4.14.33
machine# loading module fuse...
machine# modprobe: FATAL: Module fuse not found in directory /lib/modules/4.14.33
machine# loading module dm_mod...
machine# modprobe: FATAL: Module dm_mod not found in directory /lib/modules/4.14.33
I shortly tested this against the "misc" VM test and the test is working
again.
In the long term (and I currently don't have time for this) it would be
better to also have a VM test which tests a kernel without modules.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @roberth, @7c6f434c
This is necessary due to a e2fsprogs update
(e6114781b0fad5345a2430fac3587d618273bda2) that causes mke2fs to
enable a feature (metadata_csum) that depends on crc32c.
https://hydra.nixos.org/build/72636785
Setting the hash to null is a convenient way to bypass the hash check
while developing. It looks like the ability to do this was inadvertently
removed while adding vendor directory support.
This still checks that the user is explicitly setting the value but
allows null as a valid option.
This is to go to a reproducible image build.
Note without this options image are identical from the Docker point of
view but generated docker archives could have different hashes.
This is to improve image creation reproducibility. Since the nar
format doesn't support hard link, the tar stream of a layer can be
different if a dependency of a layer has been built locally or if it
has been fetched from a binary cache.
If the dependency has been build locally, it can contain hard links
which are encoded in the tar stream. If the dependency has been
fetched from a binary cache, the tar stream doesn't contain any hard
link. So even if the content is the same, tar streams are different.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
Per @Ericson2314's suggestion [1], make it more clear that the active
hardenings are decided via whitelist; the blacklist is merely for the
debug messages.
1: 36d5ce41d4 (r133279731)
Existing "mips64el" should be "mipsel".
This is just the barest minimum so that nixpkgs can recognize them as
systems - although required for building individual derivations onto
MIPS boards, it is not sufficient if you want to actually build nixos on
those targets
Previously, cargoUpdateHook was meaningful as it was used
in
[`cargo-fetch-deps`](19d3cf81d3/pkgs/build-support/rust/fetch-cargo-deps (L71)).
However, this entire file was removed in
5f8cf0048e. As far as I can
tell, nothing in the code is using it, but it is still
being passed around:
https://github.com/NixOS/nixpkgs/search?q=cargoUpdateHook&type=Code&utf8=%E2%9C%93
There are, however, legitimate use cases for it. For example,
in some software, some dependencies are not locked in Cargo.toml
and this causes Cargo to try fetching another version of them.
This doesn't work well with vendoring crates.
This hook allows to inject patching or whatever necessary workarounds
in the crate vendoring process. I suppose that's what it was for
in there in the first place.
This patch restores this hook and makes it usable again.
Before the code would fail silently for zero values and with some output for
empties. We now currently handle both via defaulting value to zero and making
`let` return success error code when there's no syntax error.
A separate function for building Bazel-bazed packages. Internally it splits the
build into two phases, fetching and building.
Users are expected to provide `fetchArgs.sha256` -- checksum of fetched
dependencies. Local dependencies should be removed in `fetchArgs.preInstall`.
Overall `fetchArgs` and `buildArgs` can be used to add specific steps to fetch
and build.
`find -executable` finds everything with the executable bit set,
including directories. Thats not harmful in this scenario as `cp` won't
copy those directories, but it does result in a few warning messages.
I originally wrote this for packaging proprietary games in Vuizvui[1]
but I thought it would be generally useful as we have a fair amount of
proprietary software lurking around in nixpkgs, which are a bit tedious
to maintain, especially when the library dependencies change after an
update.
So this setup hook searches for all ELF executables and libraries in the
resulting output paths after install phase and uses patchelf to set the
RPATH and interpreter according to what dependencies are available
inside the builder.
For example consider something like this:
stdenv.mkDerivation {
...
nativeBuildInputs = [ autoPatchelfHook ];
buildInputs = [ mesa zlib ];
...
}
Whenever for example an executable requires mesa or zlib, the RPATH will
automatically be set to the lib dir of the corresponding dependency.
If the library dependency is required at runtime, an attribute called
runtimeDependencies can be used to list dependencies that are added to
all executables that are discovered unconditionally.
Beside this, it also makes initial packaging of proprietary software
easier, because one no longer has to manually figure out the
dependencies in the first place.
[1]: https://github.com/openlab-aux/vuizvui
Signed-off-by: aszlig <aszlig@nix.build>
Closes: #34506
Among other things, this will allow *2nix tools to output plain data
while still being composable with the traditional
callPackage/.override interfaces.
Summary:
According to git-submodule manpage,
"git submodule status" prefixes the hash with a '-' if it is not
initialized, and other chars in other circumstances.
(this is consistent on the various git versions tested)
nix-prefetch-git runs "git submodule init" which does you'd think,
but apparently despite this earlier versions of git before 2.16
would still give the hash the '-' suffix.
In particular this is the behavior when using 2.15 and 2.14.1
from the nixos-17.09 and nixos-17.03 channels respectively.
The script then used awk to drop the first char of the first field
which does the wrong thing when there is no prefix emitted:
while there is a space character before the hash, this is not
part of the field and so we ended up eating the first character
of the hash.
To fix this in a way that also works with the previous behavior,
this commit instead uses awk to grab the hash field
and uses tr to delete any '-' chars should they be present.
This seems to work in my testing, and for example can now
successfully fetch the source for "nginxModules.brotli"
where previously it would generate an error:
fatal: '22564a95d9ab58865a096b8d9f7324ea5f2e03e' is not a commit and a branch 'fetchgit' cannot be created from it
(we dropped a '2' from the beginning of the hash)
We still ensure the old and new ones start, respectfully, with `a/` and
`b/`. Use with `stripLen` to ensure tha the old `a/` and `/b` are gone
if a new prefix is added.
cargo-vendor generates almost the right cargo config. Store it with the
vendored files and patch it on use.
This allows to re-use the generated config when using git dependencies.
- All deps go on the PATH
- CC and Bintools wrappers with their host != depender's host still get their
setup hooks run.
- Environment hooks get applied to all packages
This isn't so elegent, but eases the transition on a very significant
PR.
We now have the information to properly determine the role the
cc-wrapper dependency has, by taking advantage of `offset`. No longer
use the soon-to-be-deprecated crossConfig environment variable, the
temp hack used before this change.
Changes:
* doesn't handle root user separately
* doesn't chdir("/") which makes using it seamless
* only bind mounts, doesn't symlink (i.e. files)
Incidentally, fixes#33106.
It's about two times shorter than the previous version, and much
easier to read/follow through. It uses GLib quite heavily, along with
RAII (available in GCC/Clang).
It would be nice to be able to track Nix requests. It's not trustworthy,
but can be helpful for stats and routing in HTTP logs.
Since `fetchurl` is used so widely, we should "magically" get a UA on
`fetchzip`, `fetchFromGitHub`, and other related fetchers.
Since `fetchurl` is only used for fixed-output derivations, this should
cause no mass rebuild.
User-Agent example: curl/7.57.0 Nixpkgs/18.03
* Wrap LEN macro in parantheses
* Drop env_filter in favor of stateful environ_blacklist_filter,
use execvp instead of execvpe, don't explicitly use environ
* Add argument error logging wherever it makes sense
* Drop strjoin in favor of asprintf
* char* -> const char* where appropriate
* Handle stat errors
* Print user messages with fputs, not errorf
* Abstract away is_str_in (previously bind_blacklisted)
* Cleanup temporary directory on error
* Some minor syntactic and naming changes
Thanks to Jörg Thalheim and Tuomas Tynkkynen for the code review!
Factor a bintools (i.e. binutils / cctools) wrapper out of cc-wrapper. While
only LD is wrapped, the setup hook defines environment variables on behalf of
other utilites.
They aren't meant to be critical (uncatchable) errors.
Tested with nix-env + checkMeta:
[ "x86_64-linux" "i686-linux" "x86_64-darwin" "aarch64-linux" ]
This commit adds the CentOS 7.4 base image from the CentOS mirror, for use with
building RPMs or evaluating Nix expressions in a CentOS image.
When CentOS 7.5 comes out, I will swap this URL to the permanently vaulted image.
This change adds granular, non-docker daemon docker image fetchers and
a docker image layer compositor to be used in conjunction with the
`docker2nix` utility provided by the `haskellPackages.hocker` package.
This change includes a hackage package version bump and updated sha256
for recent fixes released to `hocker` resulting from formulating this
patch.
On non-GNU (gcc) compilers, there is no "/lib/gcc/..."
so when this is eventually expanded this is empty
resulting in an incomplete "-idirafter " that
eats the next argument:
-idirafter -B/nix/store/wamjwwdvkmhbf4f2902nhw8jxxzv0hy3-clang-wrapper-4.0.1/bin/
Certain tools, e.g. compilers, are customarily prefixed with the name of
their target platform so that multiple builds can be used at once
without clobbering each other on the PATH. I was using identifiers named
`prefix` for this purpose, but that conflicts with the standard use of
`prefix` to mean the directory where something is installed. To avoid
conflict and confusion, I renamed those to `targetPrefix`.
This continues #23374, which always kept around both attributes, by
always including both propagated files: `propgated-native-build-inputs`
and `propagated-build-inputs`. `nativePkgs` and `crossPkgs` are still
defined as before, however, so this change should only barely
observable.
This is an incremental step to fully keeping the dependencies separate
in all cases.
After #31497 starter quoting all values, there arouse the need to left some
values evaluated.
`--set-default var value` expands to `export var=${var-value}`, where value is
not evaluated and literally assigned to var unless it is already set.
`--set-eval var value` expands to `export var=$(eval echo value)`, where value
is evaluated by `eval`.
Currently we wrap ssh so it can find the config file passed in by
<ssh-config-file>. If one however uses ProxyCommand ssh, then ssh that
is on PATH is taken (which is also unavailable when using nix-shell
--pure), which is the plain ${openssh}/bin/ssh.
This commit makes sure our wrapped ssh is available on PATH.
