Add --use-remote-sudo option. When set, remote commands will be prefixed
with 'sudo'. This allows using sudo remotely _without_ having to use
sudo locally (when using --build-host/--taget-host).
Also add --all, which shows the value of all options. Diffing the --all
output on either side of contemplated changes is a lovely way to better
understand what's going on inside nixos.
Before, we very carefully unapplied and reapplied `set -u` so the rest
of Nixpkgs could continue to not fail on undefined variables. Let's rip
off the band-aid.
Just maching all network interfaces caused many breakages, see #18962
and #71106.
We already don't support the global networking.useDHCP,
networking.defaultGateway(6) options if networking.useNetworkd is
enabled, but direct users to configure the per-device
networking.interfaces.<name?>.… options.
Even though the release obviously already happened, I think it might
still make sense to add a short note about the attributes not being
supported any longer (and going forward).
(cherry picked from commit 7163d3a9df35904d0c9acc9f643fd70ee3108539)
(cherry picked from commit a64b8c3c191af1317cfdc1ea4f4e5f881c4cf503)
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented
Resolves#66650
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
Even a simple typo fix can result in a reflow of a whole paragraph, leading to illegible diffs. The majority of text editors supports wrapping the source code to a comfortable width so it makes sense to me to sacrifice the few that do not rather than the unfortunately line-oriented diff tools.
This plugin is fairly outdated and depends on python2 libraries that
don't receive any updates either (xmpppy for instance[1]).
[1] https://pypi.org/project/xmpppy/
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
It currently lacks an emoji font-family which means it has to be
disabled for them to function [0]. Additionally it's fallen out of
necessity to ship custom font rendering settings (as far as I'm aware
of).
[0]: https://github.com/NixOS/nixpkgs/pull/67215
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).
As described in the NixOps manual[1], dependencies to keys should be
defined like this now:
``` nix
{
systemd.services.myservice = {
after = [ "secret-key.service" ];
wants = [ "secret-key.service" ];
};
}
```
However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.
[1] https://nixos.org/nixops/manual/#idm140737322342384
systemd provides two sysctl snippets, 50-coredump.conf and
50-default.conf.
These enable:
- Loose reverse path filtering
- Source route filtering
- `fq_codel` as a packet scheduler (this helps to fight bufferbloat)
This also configures the kernel to pass coredumps to `systemd-coredump`.
These sysctl snippets can be found in `/etc/sysctl.d/50-*.conf`,
and overridden via `boot.kernel.sysctl`
(which will place the parameters in `/etc/sysctl.d/60-nixos.conf`.
Let's start using these, like other distros already do for quite some
time, and remove those duplicate `boot.kernel.sysctl` options we
previously did set.
In the case of rp_filter (which systemd would set to 2 (loose)), make
our overrides to "1" more explicit.
sysctl.d(5) recommends prefixing all filenames in /etc/sysctl.d with a
two-digit number and a dash, to simplify the ordering of the files.
Some packages provide custom files, often with "50-" prefix.
To ensure user-supplied configuration takes precedence over the one
specified via `boot.kernel.sysctl`, prefix the file generated there with
"60-".
There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
ibus-qt has not seen a release in 5 years and is only relevant for Qt
4.x, which is becoming more and more rare. Using my current laptop as a
data point, ibus-qt is the only dependency left that drags in qt-4.8.7.
Motivation is to support other repositories containing nixos
modules that would like to generate options documentation:
- nix-darwin
- private repos
- arion
- ??
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes#49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
This was supposed to go through a pull request
Revert "nodePackages: Regenerate node packages for nodejs 10 & 12"
This reverts commit 6a17bdf397.
Revert "nodejs-8_x: Drop package"
This reverts commit e06c97b71d.
PHP 7.1 is currently on life support, as in only recieving security related patches.
This will only continue until: 2019-12-01
This date are in the middle of the 19.09 lifecycle. So it would be
nice to not have it in the 19.09 stable release. Dropping it now would
also result in less maintanance in updating them.
The death dates can be seen on following links:
- https://endoflife.date/php
- https://php.net/supported-versions.php
- https://en.wikipedia.org/wiki/PHP#Release_history
It seems as the sentence at the bottom of the option summary about
Nix-specific options isn't enough, it's probably more helpful to list
those options in the synopsis as well.
The autoLuks module is not really compatible with the updated systemd
version anymore. We started dropping NixOS specific patches that caused
unwanted side effects that we had to work around otherwise.
This change points users towards the relevant PR and spits out a bit of
information on how to deal with the situation.
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
Some packages like `ibus-engines.typing-booster` require the dictionary
`fr_FR.dic` to provide proper support for the french language.
Until now the hunspell package set of nixpkgs didn't provide this
dictionary. It has been recommended to use `fr-moderne` as base and link
`fr_FR.dic` from it as done by other distros such as ArchLinux.
See https://github.com/NixOS/nixpkgs/issues/46940#issuecomment-423684570Fixes#46940
The build error has been introduced by 56dcc319cf.
Using a <simplesect/> within a <para/> is not allowed and subsequently
fails to validate while building the manual.
So instead, I moved the <simplesect/> further down and outside of the
<para/> to fix this.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aaronjanse, @Lassulus, @danbst
I have a nixops network where I deploy containers using the `container`
backend which uses `nixos-container` intenrally to deploy several
containers to a certain host.
During that time I removed and added new containers and while trying to
deploy those to a different host I realized that it isn't guaranteed
that each container gets the same IP address which is a problem as some
parts of the deployment need to know which container is using which IP
(i.e. to configure port forwarding on the host).
With this change you can specify the container's IP like this (and don't
have to use the arbitrarily used 10.233.0.0/16 subnet):
```
$ nixos-container create test --config-file test-container.nix \
--local-address 10.235.1.2 --host-address 10.235.1.1
```
Commit 29d7d8f44d has introduced another
section with the ID "sec-release-19.09-incompatibilities", which
subsequently causes the build to fail.
I just merged both sections and the manual is now building again.
Signed-off-by: aszlig <aszlig@nix.build>
