- Added option 'cni.configDir' to allow for having CNI config outside of nix-store
Existing behavior (writing verbatim CNI conf-files to nix-store) is still available.
- Removed unused option 'apiserver.publicAddress' and changed 'apiserver.address' to 'bindAddress'
This conforms better to k8s docs and removes existing --bind-address hardcoding to 0.0.0.0
- Fixed c/p mistake in apiserver systemd unit description
- Updated 18.09 release notes to reflect changes to existing options
And fixed some typos from previous PR
- Make docker images for Kubernetes Dashboard and kube-dns configurable
The usage of nixpkgs.config.packageOverrides is deprecated and we do
have overlays since quite a while.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra
This reverts a part of 5bd12c694b.
Apparently there's no way to specify user for RuntimeDirectory in systemd
service file (it's always root) but tor won't create control socket if the dir
is owned by anybody except the tor user.
These hardenings were adopted from the upstream service file, checked
against systemd.service(5) and systemd.exec(5) manuals, and tested to
actually work with all the options enabled.
`PrivateDevices` implies `DevicePolicy=closed` according to systemd.exec(5),
removed.
`--RunAsDaemon 0` is the default value according to tor(5), removed.
The `zsh-autosuggestions` package provides several configuration options
such as a different highlight style (like `fg=cyan` which is easier to
read).
With `rename.nix` the old `programs.zsh.enableAutosuggestions` is still
functional, but yields the following warning like this during evaluation:
```
trace: warning: The option `programs.zsh.enableAutosuggestions' defined in `<unknown-file>' has been renamed to `programs.zsh.autosuggestions.enable'.
```
The module provides the most common `zsh-autosuggestions` (highlight
style and strategy) as options that will be written into the interactive
shell init (`/etc/zshrc` by default). Further configuration options can
be declared using the `extraConfig` attr set:
```
{
programs.zsh.autosuggestions.extraConfig = {
"ZSH_AUTOSUGGEST_BUFFER_MAX_SIZE" = "buffer_size";
};
}
```
A full list of available configuration options for `zsh-autosuggestions`
can be viewed here: https://github.com/zsh-users/zsh-autosuggestions/blob/v0.4.3/README.md
[x] Support transparent proxying. This means services behind sslh (Apache, sshd and so on) will see the external IP and ports as if the external world connected directly to them.
[x] Run sslh daemon as unprivileged user instead of root (it is not only for security, transparent proxying requires it)
[x] Removed pidFile support (it is not compatible with running sslh daemon as unprivileged user)
[x] listenAddress default changed from "config.networking.hostName" (which resolves to meaningless "127.0.0.1" as with current /etc/hosts production) to "0.0.0.0" (all addresses)
Adds programs.mosh.withUtempter (default: true).
The option enables -with-utempter for mosh, allowing it to write to
/var/run/utmp and thus making connected sessions appear in the output
of `who -a`.
For that, a guid-wrapper is required. Also, the path to the `utempter` was
hardcoded in the resulting binary until now (so it could never been found),
thus, libutempter was patched accordingly to point to
/run/wrappers/bin/utempter which at least works when the wrapper is
configured.
Presents the options available (linuxManualConfig versus overriding
extraConfig, ignoreConfigErrors, autoModules, kernelPreferBuiltin.
For advanced hostPlatform customization refer to the commands shared by ericson1234 at
https://github.com/NixOS/nixpkgs/pull/33813 but it is too advanced to
put in the doc.
Currently minio logs with enhanced tty data and journalctl does not include anything useful as a result:
```
Jun 08 11:03:28 alpha minio[17813]: [78B blob data]
Jun 08 11:03:28 alpha minio[17813]: [49B blob data]
Jun 08 11:03:28 alpha minio[17813]: [19B blob data]
Jun 08 11:03:28 alpha minio[17813]: [88B blob data]
Jun 08 11:03:28 alpha minio[17813]: [45B blob data]
Jun 08 11:03:28 alpha minio[17813]: [44B blob data]
Jun 08 11:03:28 alpha minio[17813]: [57B blob data]
```
Indicating that it detected some binary output. With the `--json` flag it logs:
```
Jun 08 11:14:58 alpha minio[18573]: {"level":"FATAL","time":"2018-06-07T23:14:58.770637778Z","error":{"message":"--address input is invalid: address 127.0.0.1: missing port in address","source":["/build/go/src/github.com/minio/minio/cmd/server-main.go:121:cmd.serverHandleCmdArgs()"]}}
```
DBus seems to resolve user IDs directly via glibc, circumventing nscd. In more
advanced setups this leads to user's coming from LDAP or SSSD not being
resolved by the dbus system bus daemon. The effect for such users is, that all
access to the system bus (e.g. busctl or nmcli) is denied.
Adding the respective NSS modules to the service's environment solves the issue
the same way it does for nscd.
A script is used to create a project, and configure a jobset. This
jobset fetches a local file containing a trivial Nix expression. The
test script makes sure this derivation has been successfully built by
Hydra.
This has been reported by @qknight in his Stack Overflow question:
https://stackoverflow.com/q/50678639
The correct way to override a single value would be to use something
like this:
systemd.services.nagios.serviceConfig.Restart = lib.mkForce "no";
However, this doesn't work because the check is applied for the attrsOf
type and thus the attribute values might still contain the attribute set
created by mkOverride.
The unitOption type however did already account for this, but at this
stage it's already too late.
So now the actual value is unpacked while checking the values of the
attribute set, which should allow us to override values in
serviceConfig.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @qknight
* add freeipmi to get power meter readings
* readline support for scontrol
* libssh2 support for X11 supporta
* Add note to enableSrunX11 in module
* fix hwloc support (was detected by configure)
The nixos module adds a new derivation to
systemPackages to make sure that the binaries
get the generated config file. This derivation
did not contain the man pages so far.
Activating the module now makes the man pages
available in the system environment.
This change allows users to specify an alternative database method. For
example an mpd satellite setup where another mpd on the network shares
it's database with the local instance. The `dbFile` parameter must not be
configured in that case.
While building the container there are a few occasions where stdenvNoCC
is used underneath. During the last staging merge, some change now tries
to build texinfo during the test while building stdenvNoCC.
With this change, I'm adding stdenvNoCC to the closure to make sure that
even when we have future stdenv changes, it doesn't break (well, except
if we do have another variation like stdenvNoCC that overrides stdenv).
I haven't bisected the exact change, but I'd suspect that it could be
one of the commits in #39457.
This fixes the test and it no longer fails with the following error:
error: unable to download 'http://ftpmirror.gnu.org/texinfo/texinfo-6.5.tar.xz': Couldn't resolve host name (6)
builder for '/nix/store/r7sf1wjbnimwgnv276jh59nfnzw40x30-texinfo-6.5.tar.xz.drv' failed with exit code 1
cannot build derivation '/nix/store/5w1pv788ayi1wahyy76i90yqv96ai4h5-texinfo-6.5.drv': 1 dependencies couldn't be built
cannot build derivation '/nix/store/cnsfkf0j5xmm14zzm5a3a66pz66gbc82-stdenv-linux.drv': 1 dependencies couldn't be built
cannot build derivation '/nix/store/11kkhk57ic8kfd7g197sqwgd0pzqfjhl-nixos-system-foo-0-18.09pre-git.drv': 1 dependencies couldn't be built
error: build of '/nix/store/11kkhk57ic8kfd7g197sqwgd0pzqfjhl-nixos-system-foo-0-18.09pre-git.drv' failed
/run/current-system/sw/bin/nixos-container: failed to build initial container configuration
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aristidb, @edolstra, @chaoflow, @kampfschlaefer
This script is used to automatically fix issues within xml documentation
files.
The script is *for now* intended to be used ad-hoc, and the commits to
be examined.
A future discussion will define whether:
* This commit and scripts are kept.
* The script is extended for common use.
The biggest issue right now with the script is that it *could* in theory
destroy a valid space-less varlistentry.
The script could, in practical use, be changed and extended to normalize
some parts of the XML files, mainly:
* A common quoting style for attributes
* Fix-up some weird formatting automatically that xmlformat doesn't
catch
BIND doesn't allow the options section (or any section I'd guess) to be
defined more than once, so whenever you want to set an additional option
you're stuck using weird hacks like this:
services.bind.forwarders = lib.mkForce [ "}; empty-zones-enable no; #" ];
This basically exploits the fact that values coming from the module
options aren't escaped and thus works in a similar vain to how SQL
injection works.
Another option would be to just set configFile to a file that includes
all the options, including zones. That obviously makes the configuration
way less extensible and more awkward to use with the module system.
To make sure this change does work correctly I added a small test just
for that. The test could use some improvements, but better to have a
test rather than none at all. For a future improvement the test could be
merged with the NSD test, because both use the same zone file format.
This change has been reviewed in #40053 and after not getting any
opposition, I'm hereby adding this to master.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @peti, @edolstra
Closes: #40053
The hooks directory contains now one level deep subdirectories which
need to be updated as well.
If you use gitea via ssh, ~/.ssh/authorized_keys also needs to be
updated because of the hardcoded path to gitea in the "command" option.
- Added information regarding breaking changes to release note for 18.09
- Changed golang version comment in kubernetes package
- Added @johanot to maintainers list
VMs were starving, many of the daemons were unable to complete their
tasks resulting in tests failures.
Turned off verbose output from k8s components as it consumes even more resources, and useful error messages actually drown in debug-clutter
As shipped with k8s 1.10.3.
Also:
- updated the definition jsons as they are distributed in k8s.
- updated the image uris as they are renamed in k8s
- added imageDigest param as per 736848723e
As shipped with k8s 1.10.3.
Also:
- updated the definition jsons as they are distributed in k8s.
- updated the image uris as they are renamed in k8s
- added imageDigest param as per 736848723e
