"platforms.gnu" has been linux-only since at least 17.03:
$ nix eval -f channel:nixos-17.03 lib.platforms.gnu
[ "i686-linux" "x86_64-linux" "armv5tel-linux" "armv6l-linux" "armv7l-linux" "aarch64-linux" "mips64el-linux" ]
Unlike platforms.linux, platforms.gnu indicates "must use glibc"
which for the most part is not intended.
Replacing platforms.gnu with platforms.linux would be the same "today"
but let's err on preserving existing behavior and be optimistic
about platforms these packages work on.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/openfortivpn/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn -h’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn --help’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn help’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn --version’ and found version 1.7.0
- found 1.7.0 with grep in /nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0
- directory tree listing: https://gist.github.com/34708b90f0d4fc975a7b9dbd4670bfee
a) Some providers can update multiple domains - support that.
b) Make "zone" and "script" configurable. Some providers require these.
c) Instead of leaving the ddclient daemon running all the time, use a systemd
timer to kick it off.
d) Don't use a predefined user - run everything via DynamicUser
e) Add documentation
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/chrony/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyc --help’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyc help’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyd -h’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyd --help’ got 0 exit code
- found 3.3 with grep in /nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3
- directory tree listing: https://gist.github.com/60dede830d6efc2bf29be2b4983e4c97
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/lldpd/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpcli help’ got 0 exit code
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpcli -v’ and found version 1.0.1
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpctl help’ got 0 exit code
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpctl -v’ and found version 1.0.1
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpd -v’ and found version 1.0.1
- found 1.0.1 with grep in /nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1
- directory tree listing: https://gist.github.com/932f1a4dc800d742ebb11c348d927eac
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/offlineimap/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped -h’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped --help’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped --version’ and found version 7.2.0
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap -h’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap --help’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap --version’ and found version 7.2.0
- found 7.2.0 with grep in /nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0
- directory tree listing: https://gist.github.com/7a051af944742639c585d06d827dabea
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/ccnet/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7/bin/ccnet -h’ got 0 exit code
- ran ‘/nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7/bin/ccnet --help’ got 0 exit code
- found 6.1.7 with grep in /nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7
- directory tree listing: https://gist.github.com/b89fd3d2ea82f0d5a57dcfb186e1904d
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/getmail/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-gmail-xoauth-tokens-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-gmail-xoauth-tokens-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail-gmail-xoauth-tokens -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail-gmail-xoauth-tokens --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_maildir-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_maildir-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_maildir -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_maildir --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_mbox-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_mbox-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_mbox -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_mbox --help’ got 0 exit code
- found 5.6 with grep in /nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6
- directory tree listing: https://gist.github.com/05a73027c43a157053c33c4886d466f8
With this patch I remove myself as a maintainer for all packages I
currently maintain.
This is due the fact that I will be basically off the grid from May 2018
until early 2019, as I will be on a trip through north america.
I will revert this patch as soon as I'm back, as I plan to continue
contributing to nixpkgs then.
But as I cannot maintain anything during that time, I'd like to get this
patch merged.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
